Planned restart of production services
by Evgheni Dereveanchin
Hi everyone,
I will be restarting several production systems within the following hour
to apply updates.
The following services may be unreachable for some period of time:
- resources.ovirt.org - package repositories
- jenkins.ovirt.org - CI master
Package repositories will be unreachable for a short period of time.
No new CI jobs will be started during this period.
I will announce you once maintenance is complete.
--
Regards,
Evgheni Dereveanchin
5 years
[Users] Nested virtualization with Opteron 2nd generation and oVirt 3.1 possible?
by Gianluca Cecchi
Hello,
I have 2 physical servers with Opteron 2nd gen cpu.
There is CentOS 6.3 installed and some VM already configured on them.
Their /proc/cpuinfo contains
...
model name : Dual-Core AMD Opteron(tm) Processor 8222
...
kvm_amd kernel module is loaded with its default enabled nested option
# systool -m kvm_amd -v
Module = "kvm_amd"
Attributes:
initstate = "live"
refcnt = "15"
srcversion = "43D8067144E7D8B0D53D46E"
Parameters:
nested = "1"
npt = "1"
...
I already configured a fedora 17 VM as a oVirt 3.1 Engine
I'm trying to configure another VM as oVirt 3.1 node with
ovirt-node-iso-2.5.5-0.1.fc17.iso
It seems I'm not able to configure so that ovirt install doesn't complain.
After some attempts, I tried this in my vm.xml for the cpu:
<cpu mode='custom' match='exact'>
<model fallback='allow'>athlon</model>
<vendor>AMD</vendor>
<feature policy='require' name='pni'/>
<feature policy='require' name='rdtscp'/>
<feature policy='force' name='svm'/>
<feature policy='require' name='clflush'/>
<feature policy='require' name='syscall'/>
<feature policy='require' name='lm'/>
<feature policy='require' name='cr8legacy'/>
<feature policy='require' name='ht'/>
<feature policy='require' name='lahf_lm'/>
<feature policy='require' name='fxsr_opt'/>
<feature policy='require' name='cx16'/>
<feature policy='require' name='extapic'/>
<feature policy='require' name='mca'/>
<feature policy='require' name='cmp_legacy'/>
</cpu>
Inside node /proc/cpuinfo becomes
processor : 3
vendor_id : AuthenticAMD
cpu family : 6
model : 2
model name : QEMU Virtual CPU version 0.12.1
stepping : 3
microcode : 0x1000065
cpu MHz : 3013.706
cache size : 512 KB
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat
pse36 clflush mmx fxsr sse sse2 syscall mmxext fxsr_opt lm nopl pni
cx16 hypervisor lahf_lm cmp_legacy cr8_legacy
bogomips : 6027.41
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management:
2 questions:
1) Is there any combination in xml file to give to my VM so that oVirt
doesn't complain about missing hardware virtualization with this
processor?
2) suppose 1) is not possible in my case and I still want to test the
interface and try some config operations to see for example the
differences with RHEV 3.0, how can I do?
At the moment this complaint about hw virtualization prevents me to
activate the node.
I get
Installing Host f17ovn01. Step: RHEV_INSTALL.
Host f17ovn01 was successfully approved.
Host f17ovn01 running without virtualization hardware acceleration
Detected new Host f17ovn01. Host state was set to Non Operational.
Host f17ovn01 moved to Non-Operational state.
Host f17ovn01 moved to Non-Operational state as host does not meet the
cluster's minimum CPU level. Missing CPU features : CpuFlags
Can I lower the requirements to be able to operate without hw
virtualization in 3.1?
Thanks in advance,
Gianluca
5 years
Need VM run once api
by Chandrahasa S
This is a multipart message in MIME format.
--=_alternative 00361B2065257E90_=
Content-Type: text/plain; charset="US-ASCII"
Hi Experts,
We are integrating ovirt with our internal cloud.
Here we installed cloudinit in vm and then converted vm to template. We
deploy template with initial run parameter Hostname, IP Address, Gateway
and DNS.
but when we power ON initial, run parameter is not getting pushed to
inside the vm. But its working when we power on VM using run once option
on Ovirt portal.
I believe we need to power ON vm using run once API, but we are not able
get this API.
Can some one help on this.
I got reply on this query last time but unfortunately mail got deleted.
Thanks & Regards
Chandrahasa S
=====-----=====-----=====
Notice: The information contained in this e-mail
message and/or attachments to it may contain
confidential or privileged information. If you are
not the intended recipient, any dissemination, use,
review, distribution, printing or copying of the
information contained in this e-mail message
and/or attachments to it are strictly prohibited. If
you have received this communication in error,
please notify us by reply e-mail or telephone and
immediately and permanently delete the message
and any attachments. Thank you
--=_alternative 00361B2065257E90_=
Content-Type: text/html; charset="US-ASCII"
<font size=2 face="sans-serif">Hi Experts,</font>
<br>
<br><font size=2 face="sans-serif">We are integrating ovirt with our internal
cloud.</font>
<br>
<br><font size=2 face="sans-serif">Here we installed cloudinit in vm and
then converted vm to template. We deploy template with initial run parameter
Hostname, IP Address, Gateway and DNS.</font>
<br>
<br><font size=2 face="sans-serif">but when we power ON initial, run parameter
is not getting pushed to inside the vm. But its working when we power on
VM using run once option on Ovirt portal.</font>
<br>
<br><font size=2 face="sans-serif">I believe we need to power ON vm using
run once API, but we are not able get this API.</font>
<br>
<br><font size=2 face="sans-serif">Can some one help on this.</font>
<br>
<br><font size=2 face="sans-serif">I got reply on this query last time
but unfortunately mail got deleted.</font>
<br>
<br><font size=2 face="sans-serif">Thanks & Regards<br>
Chandrahasa S<br>
</font><p>=====-----=====-----=====<br>
Notice: The information contained in this e-mail<br>
message and/or attachments to it may contain <br>
confidential or privileged information. If you are <br>
not the intended recipient, any dissemination, use, <br>
review, distribution, printing or copying of the <br>
information contained in this e-mail message <br>
and/or attachments to it are strictly prohibited. If <br>
you have received this communication in error, <br>
please notify us by reply e-mail or telephone and <br>
immediately and permanently delete the message <br>
and any attachments. Thank you</p>
<p></p>
--=_alternative 00361B2065257E90_=--
5 years
[Users] importing from kvm into ovirt
by Jonathan Horne
--_000_9BE6F493F83A594DA60C45E6A09DC5AC016BA694AUSP01DAG0201co_
Content-Type: text/plain; charset="Windows-1252"
Content-Transfer-Encoding: quoted-printable
I need to import a kvm virtual machine from a standalone kvm into my ovirt =
cluster. Standalone is using local storage, and my ovirt cluster is using =
iscsi. Can i please have some advice on whats the best way to get this sys=
tem into ovirt?
Right now i see it as copying the .img file to somewhere=85 but i have no i=
dea where to start. I found this directory on one of my ovirt nodes:
/rhev/data-center/mnt/blockSD/fe633237-14b2-4f8b-aedd-bbf753bcafaf/master/v=
ms
But inside is just directories that appear to have uuid-type of names, and =
i can't tell what belongs to which vm.
Any advice would be greatly appreciated.
Thanks,
jonathan
________________________________
This is a PRIVATE message. If you are not the intended recipient, please de=
lete without copying and kindly advise us by e-mail of the mistake in deliv=
ery. NOTE: Regardless of content, this e-mail shall not operate to bind SKO=
POS to any order or other contract unless pursuant to explicit written agre=
ement or government initiative expressly permitting the use of e-mail for s=
uch purpose.
--_000_9BE6F493F83A594DA60C45E6A09DC5AC016BA694AUSP01DAG0201co_
Content-Type: text/html; charset="Windows-1252"
Content-ID: <41FAB2B157C43549B6577A3495BA255C(a)collaborationhost.net>
Content-Transfer-Encoding: quoted-printable
<html>
<head>
<meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3DWindows-1=
252">
</head>
<body style=3D"word-wrap:break-word; color:rgb(0,0,0); font-size:14px; font=
-family:Calibri,sans-serif">
<div>
<div>
<div>I need to import a kvm virtual machine from a standalone kvm into my o=
virt cluster. Standalone is using local storage, and my ovirt cluster=
is using iscsi. Can i please have some advice on whats the best way =
to get this system into ovirt?</div>
</div>
</div>
<div><br>
</div>
<div>Right now i see it as copying the .img file to somewhere=85 but i have=
no idea where to start. I found this directory on one of my ovirt no=
des:</div>
<div><br>
</div>
<div>/rhev/data-center/mnt/blockSD/fe633237-14b2-4f8b-aedd-bbf753bcafaf/mas=
ter/vms</div>
<div><br>
</div>
<div>But inside is just directories that appear to have uuid-type of names,=
and i can't tell what belongs to which vm.</div>
<div><br>
</div>
<div>Any advice would be greatly appreciated.</div>
<div><br>
</div>
<div>Thanks,</div>
<div>jonathan</div>
<br>
<hr>
<font color=3D"Gray" face=3D"Arial" size=3D"1">This is a PRIVATE message. I=
f you are not the intended recipient, please delete without copying and kin=
dly advise us by e-mail of the mistake in delivery. NOTE: Regardless of con=
tent, this e-mail shall not operate to
bind SKOPOS to any order or other contract unless pursuant to explicit wri=
tten agreement or government initiative expressly permitting the use of e-m=
ail for such purpose.</font>
</body>
</html>
--_000_9BE6F493F83A594DA60C45E6A09DC5AC016BA694AUSP01DAG0201co_--
5 years
oVirt nVidia vGPU driver questions
by femi adegoke
I'm on oVirt 4.2.6.
1) If I have a Tesla P4 (Pascal) GPU (non-GRID), do I use nVidia vGPU driver for RHEL KVM 6.2 or the Linux KVM vGPU 6.2 driver?
2) If I have a Grid K1 or K2, I assume the correct driver would be GRID 4.7?
3) Must the vGPU driver be installed on the host & in the vm?
4) Must the vGPU driver be installed first before I can run "yum -y install vdsm-hook-vfio-mdev”
5 years, 1 month
oVirt Node 4.3 Master on fc28
by femi adegoke
4.3 Master is looking good!!
A few questions:
- In Step #2: Fqdns: for a 3 host cluster, are we to add the 2nd & 3rd
hosts?
- In Step #5: Bricks:
What effect does the RAID setting have?
Enable Dedupe & Compression is new?
Configure LV Cache: what do we enter for SSD? What happens if my disks
are already all SSD, do I still benefit from using this?
5 years, 1 month
Trying to reset password for ovirt wiki
by noc
This is a multi-part message in MIME format.
--------------000005070002050708050606
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
Hoping someone can help me out.
For some reason I keep getting the following error when I try to reset
my password:
Reset password
* Error sending mail: Failed to add recipient: jvandewege(a)nieuwland.nl
[SMTP: Invalid response code received from server (code: 554,
response: 5.7.1 <jvandewege(a)nieuwland.nl>: Relay access denied)]
Complete this form to receive an e-mail reminder of your account details.
Since I receive the ML on this address it is definitely a working address.
Tried my home account too and same error but then for my home provider,
Relay denied ??
A puzzled user,
Joop
--------------000005070002050708050606
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit
<html>
<head>
<meta http-equiv="content-type" content="text/html; charset=ISO-8859-1">
</head>
<body bgcolor="#FFFFFF" text="#000000">
Hoping someone can help me out.<br>
For some reason I keep getting the following error when I try to
reset my password:<br>
<br>
<fieldset><legend>Reset password</legend>
<div class="error">
<ul>
<li>Error sending mail: Failed to add recipient:
<a class="moz-txt-link-abbreviated" href="mailto:jvandewege@nieuwland.nl">jvandewege(a)nieuwland.nl</a> [SMTP: Invalid response code
received from server (code: 554, response: 5.7.1
<a class="moz-txt-link-rfc2396E" href="mailto:jvandewege@nieuwland.nl"><jvandewege(a)nieuwland.nl></a>: Relay access denied)]</li>
</ul>
</div>
<p>Complete this form to receive an e-mail reminder of your
account details.<br>
</p>
</fieldset>
<br>
Since I receive the ML on this address it is definitely a working
address.<br>
Tried my home account too and same error but then for my home
provider, Relay denied ??<br>
<br>
A puzzled user,<br>
<br>
Joop<br>
<br>
</body>
</html>
--------------000005070002050708050606--
5 years, 1 month
ovirt-guest-agent issue on rhel5.5
by John Michael Mercado
Hi All,
I need your help. Anyone who encounter the below error and have the
solution? Can you help me how to fix this?
MainThread::INFO::2015-01-27
10:22:53,247::ovirt-guest-agent::57::root::Starting oVirt guest agent
MainThread::ERROR::2015-01-27
10:22:53,248::ovirt-guest-agent::138::root::Unhandled exception in oVirt
guest agent!
Traceback (most recent call last):
File "/usr/share/ovirt-guest-agent/ovirt-guest-agent.py", line 132, in ?
agent.run(daemon, pidfile)
File "/usr/share/ovirt-guest-agent/ovirt-guest-agent.py", line 63, in run
self.agent = LinuxVdsAgent(config)
File "/usr/share/ovirt-guest-agent/GuestAgentLinux2.py", line 371, in
__init__
AgentLogicBase.__init__(self, config)
File "/usr/share/ovirt-guest-agent/OVirtAgentLogic.py", line 171, in
__init__
self.vio = VirtIoChannel(config.get("virtio", "device"))
File "/usr/share/ovirt-guest-agent/VirtIoChannel.py", line 150, in
__init__
self._stream = VirtIoStream(vport_name)
File "/usr/share/ovirt-guest-agent/VirtIoChannel.py", line 131, in
__init__
self._vport = os.open(vport_name, os.O_RDWR)
OSError: [Errno 2] No such file or directory:
'/dev/virtio-ports/com.redhat.rhevm.vdsm'
Thanks
5 years, 1 month
