[Engine-devel] Setting cluster CPU

Michal Skrivanek michal.skrivanek at redhat.com
Wed Dec 11 06:57:56 UTC 2013


On Dec 11, 2013, at 08:53 , Oved Ourfalli <ovedo at redhat.com> wrote:

> 
> 
> ----- Original Message -----
>> From: "Michal Skrivanek" <michal.skrivanek at redhat.com>
>> To: "Oved Ourfalli" <ovedo at redhat.com>
>> Cc: "Sandro Bonazzola" <sbonazzo at redhat.com>, "Roy Golan" <rgolan at redhat.com>, "engine-devel"
>> <engine-devel at ovirt.org>
>> Sent: Wednesday, December 11, 2013 8:45:41 AM
>> Subject: Re: [Engine-devel] Setting cluster CPU
>> 
>> 
>> On Dec 11, 2013, at 08:18 , Oved Ourfalli <ovedo at redhat.com> wrote:
>> 
>>> 
>>> 
>>> ----- Original Message -----
>>>> From: "Michal Skrivanek" <michal.skrivanek at redhat.com>
>>>> To: "Oved Ourfalli" <ovedo at redhat.com>, "Sandro Bonazzola"
>>>> <sbonazzo at redhat.com>
>>>> Cc: "Roy Golan" <rgolan at redhat.com>, "engine-devel"
>>>> <engine-devel at ovirt.org>
>>>> Sent: Tuesday, December 10, 2013 8:01:08 PM
>>>> Subject: Re: [Engine-devel] Setting cluster CPU
>>>> 
>>>> 
>>>> On Dec 10, 2013, at 09:14 , Oved Ourfalli <ovedo at redhat.com> wrote:
>>>> 
>>>>> 
>>>>> 
>>>>> ----- Original Message -----
>>>>>> From: "Sandro Bonazzola" <sbonazzo at redhat.com>
>>>>>> To: "Michal Skrivanek" <michal.skrivanek at redhat.com>, "Oved Ourfalli"
>>>>>> <ovedo at redhat.com>, "Roy Golan"
>>>>>> <rgolan at redhat.com>
>>>>>> Cc: "engine-devel" <engine-devel at ovirt.org>
>>>>>> Sent: Tuesday, December 10, 2013 9:12:14 AM
>>>>>> Subject: Re: [Engine-devel] Setting cluster CPU
>>>>>> 
>>>>>> Il 09/12/2013 19:37, Michal Skrivanek ha scritto:
>>>>>>> 
>>>>>>> 
>>>>>>>> On 09 Dec 2013, at 18:58, Oved Ourfalli <ovedo at redhat.com> wrote:
>>>>>>>> 
>>>>>>>> 
>>>>>>>> 
>>>>>>>> ----- Original Message -----
>>>>>>>>> From: "Michal Skrivanek" <michal.skrivanek at redhat.com>
>>>>>>>>> To: "Sandro Bonazzola" <sbonazzo at redhat.com>, "Roy Golan"
>>>>>>>>> <rgolan at redhat.com>
>>>>>>>>> Cc: "engine-devel" <engine-devel at ovirt.org>
>>>>>>>>> Sent: Monday, December 9, 2013 5:50:49 PM
>>>>>>>>> Subject: Re: [Engine-devel] Setting cluster CPU
>>>>>>>>> 
>>>>>>>>> 
>>>>>>>>>> On Dec 9, 2013, at 16:01 , Sandro Bonazzola <sbonazzo at redhat.com>
>>>>>>>>>> wrote:
>>>>>>>>>> 
>>>>>>>>>> Hi,
>>>>>>>>>> I'm trying to set the cluster CPU type while adding the first host
>>>>>>>>>> to
>>>>>>>>>> the
>>>>>>>>>> Default cluster.
>>>>>>>>>> 
>>>>>>>>>> I know how to set the CPU type on a new cluster, since I'll do that
>>>>>>>>>> in
>>>>>>>>>> AIO
>>>>>>>>>> plugin.
>>>>>>>>>> But I'm not sure to understand how to set the CPU on an existing
>>>>>>>>>> cluster.
>>>>>>>>>> 
>>>>>>>>>> Should it be enough to specify cpu arg while adding the host to the
>>>>>>>>>> cluster?
>>>>>>>>>> (before adding an host, cpu is None on the cluster)
>>>>>>>>>> Because I'm trying to do that without success (obtaining a
>>>>>>>>>> sandybridge
>>>>>>>>>> cluster while specifying westmere cpu).
>>>>>>>>> 
>>>>>>>>> The CPU should be set from the first host if None. That is needed for
>>>>>>>>> the
>>>>>>>>> PPC
>>>>>>>>> support. Roy, we talked about it recently, where are we with this
>>>>>>>>> patch.
>>>>>>>> 
>>>>>>>> We already support modifying the CPU level of an existing cluster. If
>>>>>>>> changing it to a higher level then we just change it.
>>>>>>>> If changing it to a lower level, and there are running VMs on the
>>>>>>>> cluster,
>>>>>>>> then we warn the user that some VMs might not be migrate-able, as we
>>>>>>>> added a scheduling filter to filter out hosts with improper CPU level.
>>>>>>>> 
>>>>>>>> Unless I'm missing something, that covers the use-case, isn't it?
>>>>>>> 
>>>>>>> Not sure. I thought this is None to something, where it should work
>>>>>>> automatically without specifying anything. Just add an operational host
>>>>>> 
>>>>>> Well, here the issue is that while deploying hosted-engine VM, I'm on a
>>>>>> SandyBridge host, with 1 VM running on it (the hosted engine VM).
>>>>>> That VM has been created with CPU model Westmere to be able to migrate
>>>>>> it
>>>>>> to
>>>>>> other hosts Westmere compatible.
>>>>>> But the Default cluster is automatically set to SandyBridge when I add
>>>>>> the
>>>> 
>>>> because it's created with None in the first place, and then set by the
>>>> first
>>>> host. If you'd create it with Westmere initially the joining host would
>>>> not
>>>> change it
>>>> IMHO the setting should be done during the installation not via calling
>>>> SDK
>>>> on already created empty cluster but directly in the db when the db is
>>>> deployed. Unless I'm missing the sequence of deployment.
>>>> 
>>> 
>>> The hosted engine setup doesn't access the DB, so no reason to access it if
>>> it is possible to do that via the SDK.
>>> Didn't test that, but see no reason for it not to work.
>>> 
>>>>>> host also if I specify Westmere as CPU family in Host parameter.
>>>>>> We may be able to set manually the CPU level later somehow, but since
>>>>>> we've
>>>>>> already asked the user about the CPU level I think we should avoid to
>>>>>> ask
>>>>>> the user to change it again later. See Bug 1034821 - Hosted-setup asks
>>>>>> for
>>>>>> CPU type but it doesn't set cluster to that CPU Level
>>>>>> 
>>>>> 
>>>>> You can set the CPU level through the SDK, after you add the host (didn't
>>>>> check that, but see no reason it won't work).
>>>> 
>>>> why so late in the process?
>>>> 
>>> 
>>> why does it matter? The setup is still running, so, imo, the order is less
>>> relevant, as long as the result is okay.
>> 
>> 
>> depends. if hosted engine is part of the installation, it should do the
>> modifications during installation the same way as anything else, forcefully,
>> and not depend on working sdk or any other precondition
>> if it is something you are/should be able to deploy over an existing setup
>> it's better via sdk...
>> 
> 
> Well... it is somewhere in between.
> One of the steps in the hosted engine setup is to start a VM in which the user needs to install the engine.
> So, adding the host is done via the SDK after the engine installation is completed.

ah, ok, I thought it's before that, as the host is the one your engine is at, so I thought it can be created right at the beginning
then it all makes sense:)
 
> That's why I thought it would be best to change the CPU level also after the engine installation is complete, and not during it.
> In addition, it will probably also help covering the use-case of migrating an existing engine to a hosted engine environment (although I'm not familiar enough with the current proposed solution for this use-case).

> 
>>>>> 
>>>>>> 
>>>>>>> 
>>>>>>>> 
>>>>>>>>> Thanks,
>>>>>>>>> michal
>>>>>>>>> 
>>>>>>>>>> 
>>>>>>>>>> Michael, can you take a look at http://gerrit.ovirt.org/22129 and
>>>>>>>>>> advise?
>>>>>>>>>> 
>>>>>>>>>> 
>>>>>>>>>> --
>>>>>>>>>> Sandro Bonazzola
>>>>>>>>>> Better technology. Faster innovation. Powered by community
>>>>>>>>>> collaboration.
>>>>>>>>>> See how it works at redhat.com
>>>>>>>>>> _______________________________________________
>>>>>>>>>> Engine-devel mailing list
>>>>>>>>>> Engine-devel at ovirt.org
>>>>>>>>>> http://lists.ovirt.org/mailman/listinfo/engine-devel
>>>>>>>>> 
>>>>>>>>> _______________________________________________
>>>>>>>>> Engine-devel mailing list
>>>>>>>>> Engine-devel at ovirt.org
>>>>>>>>> http://lists.ovirt.org/mailman/listinfo/engine-devel
>>>>>>>>> 
>>>>>> 
>>>>>> 
>>>>>> --
>>>>>> Sandro Bonazzola
>>>>>> Better technology. Faster innovation. Powered by community
>>>>>> collaboration.
>>>>>> See how it works at redhat.com
>>>>>> _______________________________________________
>>>>>> Engine-devel mailing list
>>>>>> Engine-devel at ovirt.org
>>>>>> http://lists.ovirt.org/mailman/listinfo/engine-devel
>>>>>> 
>>>> 
>>>> 
>> 
>> 




More information about the Devel mailing list