[ovirt-devel] Name resolution not working after vdsm installation

[Piotr Kliczewski]

In addition here is my resolv.conf

; generated by /usr/sbin/dhclient-script
nameserver 2001:730:3ed2::53
nameserver 2001:730:3ed2:1000::53
search localdomain

On Wed, Apr 25, 2018 at 11:26 AM, Piotr Kliczewski
<piotr.kliczewski at gmail.com> wrote:
> All,
>
> I am using latest engine and vdsm 4.20.23-1. I installed vdsm on
> centos7 vm and after the installation my vm stopped resolving names.
>
> Here is my nic configuration before installation:
>
> TYPE="Ethernet"
> BOOTPROTO="dhcp"
> DEFROUTE="yes"
> PEERDNS="yes"
> PEERROUTES="yes"
> IPV4_FAILURE_FATAL="no"
> IPV6INIT="yes"
> IPV6_AUTOCONF="yes"
> IPV6_DEFROUTE="yes"
> IPV6_PEERDNS="yes"
> IPV6_PEERROUTES="yes"
> IPV6_FAILURE_FATAL="no"
> NAME="eth0"
> UUID="0079668a-8708-46ad-8dbf-da418ae6f77e"
> DEVICE="eth0"
> ONBOOT="yes"
>
> here is after:
>
> # Generated by VDSM version 4.20.23-1.el7.centos
> DEVICE=eth0
> BRIDGE=ovirtmgmt
> ONBOOT=yes
> MTU=1500
> DEFROUTE=no
> NM_CONTROLLED=no
> IPV6INIT=no
>
> and the bridge:
> # Generated by VDSM version 4.20.23-1.el7.centos
> DEVICE=ovirtmgmt
> TYPE=Bridge
> DELAY=0
> STP=off
> ONBOOT=yes
> BOOTPROTO=dhcp
> MTU=1500
> DEFROUTE=yes
> NM_CONTROLLED=no
> IPV6INIT=yes
> DHCPV6C=yes
> IPV6_AUTOCONF=no
>
> Thanks,
> Piotr