[Engine-devel] Proposal for new commit msg design for engine commits

Fabian Deutsch fabiand at redhat.com
Thu Jul 11 08:41:24 UTC 2013


Am Mittwoch, den 10.07.2013, 15:27 -0400 schrieb Eyal Edri:
> 
> ----- Original Message -----
> > From: "Fabian Deutsch" <fabiand at redhat.com>
> > To: "Alon Bar-Lev" <alonbl at redhat.com>
> > Cc: "engine-devel" <engine-devel at ovirt.org>, "infra" <infra at ovirt.org>
> > Sent: Tuesday, July 9, 2013 3:54:06 PM
> > Subject: Re: [Engine-devel] Proposal for new commit msg design for engine commits
> > 
> > Am Dienstag, den 09.07.2013, 08:49 -0400 schrieb Alon Bar-Lev:
> > > 
> > > 
> > > ----- Original Message -----
> > > > From: "Yair Zaslavsky" <yzaslavs at redhat.com>
> > > > To: "Alon Bar-Lev" <alonbl at redhat.com>
> > > > Cc: "Eyal Edri" <eedri at redhat.com>, "engine-devel"
> > > <engine-devel at ovirt.org>, "infra" <infra at ovirt.org>
> > > > Sent: Tuesday, July 9, 2013 3:42:24 PM
> > > > Subject: Re: [Engine-devel] Proposal for new commit msg design for
> > > engine     commits
> > > > 
> > > > 
> > > > 
> > > > ----- Original Message -----
> > > > > From: "Alon Bar-Lev" <alonbl at redhat.com>
> > > > > To: "Eyal Edri" <eedri at redhat.com>
> > > > > Cc: "engine-devel" <engine-devel at ovirt.org>, "infra"
> > > <infra at ovirt.org>
> > > > > Sent: Tuesday, July 9, 2013 3:33:57 PM
> > > > > Subject: Re: [Engine-devel] Proposal for new commit msg design for
> > > engine
> > > > >     commits
> > > > > 
> > > > > 
> > > > > 
> > > > > ----- Original Message -----
> > > > > > From: "Eyal Edri" <eedri at redhat.com>
> > > > > > To: "engine-devel" <engine-devel at ovirt.org>
> > > > > > Cc: "infra" <infra at ovirt.org>
> > > > > > Sent: Tuesday, July 9, 2013 12:38:51 PM
> > > > > > Subject: Proposal for new commit msg design for engine commits
> > > > > > 
> > > > > > Hi,
> > > > > > 
> > > > > > You all probably know and familiar with 'ovirt-engine' git hook
> > > for
> > > > > > commit
> > > > > > msg template [1].
> > > > > > this helps understand the general area of the patch in the
> > > project but it
> > > > > > lacks additional info that might
> > > > > > be valuable for scaling automatic tests in Jenkins CI.
> > > > > > 
> > > > > > Let me explain:
> > > > > > 
> > > > > > Infra team is working hard on expanding oVirt CI infrastructure
> > > and
> > > > > > adding
> > > > > > more tests in jenkins (per commit/patch).
> > > > > > Adding important meta-data per patch can significatly improve
> > > the ability
> > > > > > to
> > > > > > run specific tests for each patch/commit,
> > > > > > and not waste valuable resources on Jenkins jobs that are not
> > > relevant to
> > > > > > the
> > > > > > code in the patch.
> > > > > > 
> > > > > > So the idea is to add/expand current metadata per patch, in the
> > > form of:
> > > > > > (either)
> > > > > >  1. expanding current header template to include more data like
> > > 'network'
> > > > > >  ,
> > > > > >  'setup', 'tools', 'virt'
> > > > > 
> > > > > Please do not expand header, it is too short anyway.
> > > > > 
> > > > > >  2. adding a new label with relevant tags for the patch, called
> > > e.g
> > > > > >  'METADATA: network, rest, virt'
> > > > > 
> > > > > Having:
> > > > > 
> > > > > CI-Tests: xxx
> > > > > CI-Tests: yyy
> > > > > CI-Tests: zzz
> > > > > 
> > > > > Is much better.
> > > > 
> > > > I'm not sure we should have CI-Test - as we might use this for
> > > something else
> > > > besides CI.
> > > > Region_of_Interest as Dan suggests sounds better IMHO.
> > > 
> > > I don't care how this is to be called.
> > > However, I do not think that commit message is the place for
> > > instructing CI to do anything.
> > > Commit message stays for good, it should contain information that is
> > > required a year from now.
> > > It has nothing to do with tests and such.
> > 
> > I agree with Alon here that the Ci informations don't belong in the
> > commit msg.
> > My opinion is that a testcase should know what it covers. This
> > information from the testcase can then be used by any party to determin
> > if the testcase should be run on a specific commit (which yields
> > informations about the changed paths, files, owner, author, etc ...
> > which might be valuable).
> 
> i think you're missing the point here.
> can you explain how do you propose a test case will know "what it covers"? 
> 
> let's take an example: 
> let's say a new commit comes from ovirt-engine: http://gerrit.ovirt.org/#/c/16668/
> commit msg: "core: Use images instead of volumes at CDA message".
> 
> now you have 1000 test cases (could be system or functional test).
> (let's assume that your infra can't support running 1000 tests per patch/commit). 
> 
> Some of these test suits checks network flow, some virt (migration/template for e.g), some host install, others storage flows and so on... ). 
> you have one repo to clone (ovirt-engine, let's keep vdsm a side for a min), and to compile the project from for the tests.
> 
> now given this scenario, please explain how will you know which test from the 1000 you have you'll run on it.
> do you believe that according to the author/path/filename you'll know if that patch involves storage or virt scenario? 

Hey Eyal,

Yes - I would at least give it a try to decide automagically what tests
to run by looking at the change.
The main motivation for this is to not add another things which the
committer needs to take care of and IMO we humans tend to fail (at some
point) on those boring tasks like adding correct metadata (let it be a
typo or just not adding the correct testsuites/topis to be run).
But let's get back to your example.
Basically we can use the path and filename to determin what testsuite to
run.
Testsuites could be bound to paths and/or filenames and/or regexes being
matched against the full filename.
Another approach would be to use a java package dependency tree to
determine which classes are directly and indirectly affected by a
change. This information can then be used to also build a set of
testsuites to be run. For example:
World uses Ocean uses Wale uses Cell - if Wale changes, we'll surely
want to run the testsuites assigned to the classes higher up in the
dependency chain (World and Ocean).

For the concrete example above: Maybe there is a spell checker testcase
which could be bound to the filename glob pattern *.properties.

> i don't think there's an alternative to a metadata to assist mapping the patch to a relevant "topic" in the code.
> whether it exists as a git note or a label in the commit, that's another matter and probably less important. 

The idea is to use the path/filename and dependency tree informations to
model these topics. Example:
WaterTestsuite(Topic):
  regex_in_change: .*\.fish
  glob_in_change: src/classes/ocean/*.java
  path_in_change: src/classes/water.java
  change_affects_depency_of: WaterClass

But surely labels or meta-data in the commit msg are quicker to
implement.

- fabian

> eyal. 
> 
> > 
> > - fabian
> > 
> > _______________________________________________
> > Engine-devel mailing list
> > Engine-devel at ovirt.org
> > http://lists.ovirt.org/mailman/listinfo/engine-devel
> > 





More information about the Engine-devel mailing list