Build failed in Jenkins: ovirt_3.6_system-tests #41

jenkins at jenkins.phx.ovirt.org jenkins at jenkins.phx.ovirt.org
Tue May 24 15:13:38 UTC 2016


See <http://jenkins.ovirt.org/job/ovirt_3.6_system-tests/41/changes>

Changes:

[David Caro] Added message when the system ram is small

------------------------------------------
[...truncated 179 lines...]
            [[ -d /etc/dnf ]] && cat /etc/yum/yum.conf > /etc/dnf/dnf.conf
            rm -Rf /var/lib/rpm/__* &>$logdir/rpmbuild.log
            rpm --rebuilddb &>>$logdir/rpmbuild.log
EOC
WARNING: Could not find required logging config file: <http://jenkins.ovirt.org/job/ovirt_3.6_system-tests/ws/ovirt-system-tests/logging.ini.> Using default...
INFO: mock.py version 1.2.17 starting (python version = 3.4.3)...
Start: init plugins
INFO: selinux enabled
Finish: init plugins
Start: run
Start: chroot init
INFO: calling preinit hooks
INFO: enabled root cache
INFO: enabled yum cache
Start: cleaning yum metadata
Finish: cleaning yum metadata
Finish: chroot init
Start: shell
sh: cannot set terminal process group (110813): Inappropriate ioctl for device
sh: no job control in this shell
<mock-chroot>sh-4.3#             set -e
sh-4.3# <mock-chroot>            logdir="<http://jenkins.ovirt.org/job/ovirt_3.6_system-tests/ws/ovirt> 
-system-tests/logs/mocker-fedora-23-x86_64.fc23.clean_rpmdb"
sh-4.3#  <mock-chroot>           [[ -d $logdir ]] \
>             || mkdir -p "$logdir"
<mock-chroot>sh-4.3#             # Fix that allows using yum inside the chroot on dnf enabled 
                                                                               d
sh-4.3# <mock-chroot>            # distros
sh-4.3#  <mock-chroot>           [[ -d /etc/dnf ]] && cat /etc/yum/yum.conf > /etc/dnf/dnf.co 
nf
<mock-chroot>sh-4.3#             rm -Rf /var/lib/rpm/__* &>$logdir/rpmbuild.log
<mock-chroot>sh-4.3#             rpm --rebuilddb &>>$logdir/rpmbuild.log
<mock-chroot>sh-4.3# logout
Finish: shell
Clean rpmdb took 2 seconds
============================
Using proxified config ../jenkins/mock_configs/fedora-23-x86_64_proxied.cfg
Generating temporary mock conf <http://jenkins.ovirt.org/job/ovirt_3.6_system-tests/ws/ovirt-system-tests/mocker-fedora-23-x86_64.fc23>
Adding mount points
Using chroot cache = /var/cache/mock/fedora-23-x86_64-57b948690aad4a606d6ca382a3ea484d
Using chroot dir = /var/lib/mock/fedora-23-x86_64-57b948690aad4a606d6ca382a3ea484d-94419
Adding repo lago -> http://resources.ovirt.org/repos/lago/stable/0.0/rpm/fc23
Adding repo ovirt-3.6-stable -> http://resources.ovirt.org/pub/ovirt-3.6/rpm/fc23
    mock \
        --root="mocker-fedora-23-x86_64.fc23" \
        --configdir="<http://jenkins.ovirt.org/job/ovirt_3.6_system-tests/ws/ovirt-system-tests"> \
        --no-clean \
        --resultdir="logs/mocker-fedora-23-x86_64.fc23.basic_suite_3.6.sh" \
        --shell <<EOS
            set -e
            logdir="<http://jenkins.ovirt.org/job/ovirt_3.6_system-tests/ws/ovirt-system-tests/logs/mocker-fedora-23-x86_64.fc23.basic_suite_3.6.sh">
            [[ -d "\$logdir" ]] \
            || mkdir -p "\$logdir"
            export HOME=<http://jenkins.ovirt.org/job/ovirt_3.6_system-tests/ws/ovirt-system-tests>
            cd
            chmod +x automation/basic_suite_3.6.sh
            runner_GID="1013"
            runner_GROUP="jenkins"
            # mock group is called mockbuild inside the chroot
            if [[ \$runner_GROUP == "mock" ]]; then
                runner_GROUP=mockbuild
            fi
            if ! getent group "\$runner_GID" &>/dev/null; then
                groupadd \
                    --gid "\$runner_GID" \
                    "\$runner_GROUP"
            fi
            start="\$(date +%s)"
            res=0
            echo "========== Running the shellscript automation/basic_suite_3.6.sh" \
                | tee -a \$logdir/basic_suite_3.6.sh.log
            ./automation/basic_suite_3.6.sh 2>&1 | tee -a \$logdir/basic_suite_3.6.sh.log \
            || res=\${PIPESTATUS[0]}
            end="\$(date +%s)"
            echo "Took \$((end - start)) seconds" \
            | tee -a \$logdir/basic_suite_3.6.sh.log
            echo "===================================" \
            | tee -a \$logdir/basic_suite_3.6.sh.log
            if [[ "\$(find . -uid 0 -print -quit)" != '' ]]; then
                chown -R "$UID:\$runner_GID" .
            fi
            exit \$res
EOS
WARNING: Could not find required logging config file: <http://jenkins.ovirt.org/job/ovirt_3.6_system-tests/ws/ovirt-system-tests/logging.ini.> Using default...
INFO: mock.py version 1.2.17 starting (python version = 3.4.3)...
Start: init plugins
INFO: selinux enabled
Finish: init plugins
Start: run
Start: chroot init
INFO: calling preinit hooks
INFO: enabled root cache
INFO: enabled yum cache
Start: cleaning yum metadata
Finish: cleaning yum metadata
Finish: chroot init
Start: shell
sh: cannot set terminal process group (110813): Inappropriate ioctl for device
sh: no job control in this shell
<mock-chroot>sh-4.3#             set -e
<mock-chroot>sh-4.3#             logdir="<http://jenkins.ovirt.org/job/ovirt_3.6_system-tests/ws/ovirt> 
-system-tests/logs/mocker-fedora-23-x86_64.fc23.basic_suite_3.6.sh"
<mock-chroot>sh-4.3#             [[ -d "$logdir" ]] \
>             || mkdir -p "$logdir"
<mock-chroot>sh-4.3#             export HOME=<http://jenkins.ovirt.org/job/ovirt_3.6_system-tests/ws/o> 
virt-system-tests
<mock-chroot>sh-4.3#             cd
<mock-chroot>sh-4.3#             chmod +x automation/basic_suite_3.6.sh
<mock-chroot>sh-4.3#             runner_GID="1013"
<mock-chroot>sh-4.3#             runner_GROUP="jenkins"
<mock-chroot>sh-4.3#             # mock group is called mockbuild inside the chroot
<mock-chroot>sh-4.3#             if [[ $runner_GROUP == "mock" ]]; then
>                 runner_GROUP=mockbuild
>             fi
<mock-chroot>sh-4.3#             if ! getent group "$runner_GID" &>/dev/null; then
>                 groupadd                     --gid "$runner_GID"               
       "$runner_GROUP"
>             fi
<mock-chroot>sh-4.3#             start="$(date +%s)"
<mock-chroot>sh-4.3#             res=0
<mock-chroot>sh-4.3#             echo "========== Running the shellscript automation/basic_su 
ite_3.6.sh"                 | tee -a $logdir/basic_suite_3.6.sh.log
========== Running the shellscript automation/basic_suite_3.6.sh
<mock-chroot>sh-4.3#             # It turns out that on some scripts if the following is not  
all
<mock-chroot>sh-4.3#             # in the same line, it never runs and returns with 0 (giving 
 false
<mock-chroot>sh-4.3#             # positives)
<mock-chroot>sh-4.3#             ./automation/basic_suite_3.6.sh 2>&1 | tee -a $logdir/basic_ 
suite_3.6.sh.log             && res=${PIPESTATUS[0]};             end="$(date +% 
s)";             echo "Took $((end - start)) seconds"             | tee -a $logd 
ir/basic_suite_3.6.sh.log;             echo "=================================== 
"             | tee -a $logdir/basic_suite_3.6.sh.log;             if [[ "$(find 
 . -uid 0 -print -quit)" != '' ]]; then                 chown -R "1013:$runner_G 
ID" . ;            fi;             exit $res
################# lago version
lago 0.18.0
#################
Running suite found in <http://jenkins.ovirt.org/job/ovirt_3.6_system-tests/ws/ovirt-system-tests/basic_suite_3.6>
Environment will be deployed at <http://jenkins.ovirt.org/job/ovirt_3.6_system-tests/ws/ovirt-system-tests/deployment-basic_suite_3.6>
<http://jenkins.ovirt.org/job/ovirt_3.6_system-tests/ws/ovirt-system-tests/basic_suite_3.6/control.sh>: line 7: <http://jenkins.ovirt.org/job/ovirt_3.6_system-tests/ws/ovirt-system-tests/basic_suite_3.6/LagoInitFile.in>: No such file or directory
find: ‘deployment-basic_suite_3.6’: No such file or directory
#########################
======== Cleaning up
----------- No uuid found, cleaning up any lago-generated vms
Lago cleanup did not work (that is ok), forcing libvirt
----------- Cleaning libvirt
----------- Cleaning libvirt Done
======== Cleanup done
Took 1 seconds
===================================
logout
Finish: shell
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@ Tue May 24 15:13:31 UTC 2016 automation/basic_suite_3.6.sh chroot finished
@@      took 98 seconds
@@      rc = 1
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
========== Scrubbing chroot
    mock \
        --configdir="<http://jenkins.ovirt.org/job/ovirt_3.6_system-tests/ws/ovirt-system-tests"> \
        --root="mocker-fedora-23-x86_64.fc23" \
        --resultdir="logs/mocker-fedora-23-x86_64.fc23.scrub" \
        --scrub=chroot
WARNING: Could not find required logging config file: <http://jenkins.ovirt.org/job/ovirt_3.6_system-tests/ws/ovirt-system-tests/logging.ini.> Using default...
INFO: mock.py version 1.2.17 starting (python version = 3.4.3)...
Start: init plugins
INFO: selinux enabled
Finish: init plugins
Start: run
Start: scrub ['chroot']
INFO: scrubbing chroot for mocker-fedora-23-x86_64.fc23
Finish: scrub ['chroot']
Finish: run
Scrub chroot took 7 seconds
============================
##########################################################
## Tue May 24 15:13:38 UTC 2016 Finished env: fc23:fedora-23-x86_64
##      took 105 seconds
##      rc = 1
##########################################################
##! ERROR vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
##! Last 20 log enties: logs/mocker-fedora-23-x86_64.fc23.basic_suite_3.6.sh/basic_suite_3.6.sh.log
##!
========== Running the shellscript automation/basic_suite_3.6.sh
################# lago version
lago 0.18.0
#################
Running suite found in <http://jenkins.ovirt.org/job/ovirt_3.6_system-tests/ws/ovirt-system-tests/basic_suite_3.6>
Environment will be deployed at <http://jenkins.ovirt.org/job/ovirt_3.6_system-tests/ws/ovirt-system-tests/deployment-basic_suite_3.6>
<http://jenkins.ovirt.org/job/ovirt_3.6_system-tests/ws/ovirt-system-tests/basic_suite_3.6/control.sh>: line 7: <http://jenkins.ovirt.org/job/ovirt_3.6_system-tests/ws/ovirt-system-tests/basic_suite_3.6/LagoInitFile.in>: No such file or directory
find: ‘deployment-basic_suite_3.6’: No such file or directory
#########################
======== Cleaning up
----------- No uuid found, cleaning up any lago-generated vms
Lago cleanup did not work (that is ok), forcing libvirt
----------- Cleaning libvirt
----------- Cleaning libvirt Done
======== Cleanup done
Took 1 seconds
===================================
##!
##! ERROR ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
##!########################################################
##########################################################
Build step 'Execute shell' marked build as failure
Performing Post build task...
Match found for :.* : True
Logical operation result is TRUE
Running script  : #!/bin/bash -xe
echo 'shell_scripts/system_tests.collect_logs.sh'

#
# Required jjb vars:
#    version
#
VERSION=3.6
SUITE_TYPE=

WORKSPACE="$PWD"
OVIRT_SUITE="$SUITE_TYPE_suite_$VERSION"
TESTS_LOGS="$WORKSPACE/ovirt-system-tests/exported-artifacts"

rm -rf "$WORKSPACE/exported-artifacts"
mkdir -p "$WORKSPACE/exported-artifacts"

if [[ -d "$TESTS_LOGS" ]]; then
    mv "$TESTS_LOGS/"* "$WORKSPACE/exported-artifacts/"
fi

[ovirt_3.6_system-tests] $ /bin/bash -xe /tmp/hudson6695619857431456168.sh
+ echo shell_scripts/system_tests.collect_logs.sh
shell_scripts/system_tests.collect_logs.sh
+ VERSION=3.6
+ SUITE_TYPE=
+ WORKSPACE=<http://jenkins.ovirt.org/job/ovirt_3.6_system-tests/ws/>
+ OVIRT_SUITE=3.6
+ TESTS_LOGS=<http://jenkins.ovirt.org/job/ovirt_3.6_system-tests/ws/ovirt-system-tests/exported-artifacts>
+ rm -rf <http://jenkins.ovirt.org/job/ovirt_3.6_system-tests/41/artifact/exported-artifacts>
+ mkdir -p <http://jenkins.ovirt.org/job/ovirt_3.6_system-tests/41/artifact/exported-artifacts>
+ [[ -d <http://jenkins.ovirt.org/job/ovirt_3.6_system-tests/ws/ovirt-system-tests/exported-artifacts> ]]
+ mv '<http://jenkins.ovirt.org/job/ovirt_3.6_system-tests/ws/ovirt-system-tests/exported-artifacts/*'> <http://jenkins.ovirt.org/job/ovirt_3.6_system-tests/41/artifact/exported-artifacts/>
mv: cannot stat ‘<http://jenkins.ovirt.org/job/ovirt_3.6_system-tests/ws/ovirt-system-tests/exported-artifacts/*%E2%80%99>: No such file or directory
POST BUILD TASK : FAILURE
END OF POST BUILD TASK : 0
ESCALATE FAILED POST BUILD TASK TO JOB STATUS
Recording test results
ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?
Archiving artifacts



More information about the Infra mailing list