[Users] non-operational state as host does not meet clusters' minimu CPU level.

Itamar Heim iheim at redhat.com
Fri Sep 21 07:56:56 UTC 2012


On 09/21/2012 09:24 AM, wujieke wrote:
> Thanks a lot. Mark.
>
> Attach output for reference.

ok, so libvirt/virsh detect sandybridge, but vdsm only reports conroe.
there used to be a bug around this in vdsm - which version of vdsm are 
you running?

>
> -----Original Message-----
> From: Mark Wu [mailto:wudxw at linux.vnet.ibm.com]
> Sent: Friday, September 21, 2012 2:15 PM
> To: wujieke
> Cc: 'Itamar Heim'; users at ovirt.org
> Subject: Re: [Users] non-operational state as host does not meet clusters'
> minimu CPU level.
>
> On 09/21/2012 01:01 PM, wujieke wrote:
>> I follow the wiki page to re-install ovirt with all-in-one version .
>> my local host in ovirt is working now.
>> Thanks a lot.
>>
>> Btw: the cmd " virsh capabilities" complains out :
>>
>> [root at localhost ~]# virsh capabilities Please enter your
>> authentication name:
>> Please enter your password:
>> error: Failed to reconnect to the hypervisor
>> error: no valid connection
>> error: authentication failed: Failed to step SASL negotiation: -1
> (SASL(-1):
>> generic failure: All-whitespace username.)
>>
>> any idea?
> Please try "virsh -r capabilities"
>>
>> -----Original Message-----
>> From: Itamar Heim [mailto:iheim at redhat.com]
>> Sent: Friday, September 21, 2012 12:44 PM
>> To: wujieke
>> Cc: node-devel at ovirt.org; users at ovirt.org
>> Subject: Re: [Users] non-operational state as host does not meet clusters'
>> minimu CPU level.
>>
>> On 09/21/2012 03:54 AM, wujieke wrote:
>>> [root at localhost ~]# vdsClient -s 0 getVdsCaps | grep -i flags
>>>            cpuFlags =
>>> fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse
>>> 3
>>> 6,clfl
>>> ush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,pdpe1gb,rdtscp
>>> ,
>>> lm,con
>>> stant_tsc,arch_perfmon,pebs,bts,rep_good,nopl,xtopology,nonstop_tsc,a
>>> p
>>> erfmpe
>>> rf,pni,pclmulqdq,dtes64,monitor,ds_cpl,vmx,smx,est,tm2,ssse3,cx16,xtp
>>> r
>>> ,pdcm,
>>> pcid,dca,sse4_1,sse4_2,x2apic,popcnt,tsc_deadline_timer,aes,xsave,avx
>>> ,
>>> lahf_l
>>> m,ida,arat,epb,xsaveopt,pln,pts,dts,tpr_shadow,vnmi,flexpriority,ept,
>>> v
>>> pid,mo
>>> del_coreduo,model_Conroe
>>>
>>> seems only support model_Conroe?
>> and output of: virsh capabilities?
>>
>>
>>> -----Original Message-----
>>> From: Itamar Heim [mailto:iheim at redhat.com]
>>> Sent: Thursday, September 20, 2012 10:04 PM
>>> To: wujieke
>>> Cc: node-devel at ovirt.org; users at ovirt.org
>>> Subject: Re: [Users] non-operational state as host does not meet
> clusters'
>>> minimu CPU level.
>>>
>>> On 09/20/2012 12:19 PM, wujieke wrote:
>>>> Hi, everyone, if it's not the right mail list, pls point out.. thanks..
>>>>
>>>> I am trying to install the ovirt on my Xeon E5-2650 process on Dell
>>>> server, which is installed with Fedora 17. While I create a new host
>>>> , which actually is the same server as overt-engine is running.
>>>>
>>>> The host is created ,and starting to "installing". But it ends with
>>>> "Non operational state".
>>>>
>>>> Error:
>>>>
>>>> Host CPU type is not compatible with cluster properties, missing CPU
>>>> feature: model_sandybridge.
>>>>
>>>> But in my cluster, I select "sandybridge" CPU, and my Xeon C5 is
>>>> also in Sandy bridge family.  And also this error lead my server reboot.
>>>>
>>>> Any help is appreciated.
>>>>
>>>> Btw: I have enable INTEL-VT in BIOS. And modprobe KVM and kvm-intel
>>>> modules. . attached is screen shot for error.
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> Users mailing list
>>>> Users at ovirt.org
>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>>
>>> please send output of this command from the host (not engine)
>>> vdsClient -s 0 getVdsCaps | grep -i flags
>>>
>>
>> _______________________________________________
>> Users mailing list
>> Users at ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>>





More information about the Users mailing list