[Users] vlan on mgmt network

William Kwan potatok at yahoo.com
Fri Jan 17 21:38:30 UTC 2014


OK..   tested with bond0.102 for vlan102
I guess I can't do this with oVirt?  It wouldn't pickup this interface. It still shows up eth0, eth1 and bond0 only

Will





On Friday, January 17, 2014 1:15 PM, William Kwan <potatok at yahoo.com> wrote:
 
Thanks all for the info. I'm trying the suggestions with 3.3.2-1.el6

Assaf mentioned the following which is true.
You can make ovirtmgmt a non-VM, untagged (non-VLAN) network, then placeas many VM, tagged networks as you'd like on the same NIC or bond.

I tried a few things and I haven't been able to find a way through.  Obviously or not, there are more facts/rules.  Just put up a few of them here

Cannot have more than one non-VLAN network on one interface

Cannot have a non-VLAN VM network and VLAN-tagged networks on one interface. ( got this when I tried to drag a VLAN-tagged VM network on the same interface as the non-VLAN VM network).

I'll try to test adding a bond0.<vlan>.  I need to have
bond0 - for both mgmt network and a vlan
bond1 - for another subnet.

Will






On Thursday, January 16, 2014 1:50 PM, Juan Pablo Lorier <jplorier at gmail.com> wrote:
 
Hi William,

You can have several logical networks on the same interface. If
ovirtmgmt is not a vm network you can even mix tagged and untagged
networks (if not, you can't mix). You don's have to do anything besides
creating the logical networks in ovirt and assign them to the
 interface,
ovirt takes care of creating the virtual interfaces it needs.
What you can't do is have more than one logical network per vlan (I
think there's a feature request on this, I know I've asked it on the

list:-) ).
Regards,
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20140117/2109ca0d/attachment-0001.html>


More information about the Users mailing list