
----- Original Message -----
From: "Lars Nielsen" <lars@steinwurf.com> To: users@ovirt.org Sent: Tuesday, January 13, 2015 10:20:20 AM Subject: [ovirt-users] Host in NonOperational mode ovirtmgmt network missing
Hey I am new to oVirt, so please be patient
I have a problem, when setting up new hosts. Doing the setup it self no problem, but afterwards the status is set to NonOperational. Do to the network ovirtmgmt is missing on the machine.
However I have added the following ifcfg file: ifcfg-ovirtmgmt:: DEVICE=ovirtmgmt TYPE=Bridge ONBOOT=yes DELAY=0 BOOTPROTO=dhcp IPADDR=192.168.1.10 NETMASK=255.255.255.0 GATEWAY=192.168.0.1
And made the adjustments, so the ifcfg-en1, file looks like this: TYPE="Ethernet" #BOOTPROTO="dhcp" DEFROUTE="yes" IPV4_FAILURE_FATAL="no" IPV6INIT="yes" IPV6_AUTOCONF="yes" IPV6_DEFROUTE="yes" IPV6_PEERDNS="yes" IPV6_PEERROUTES="yes" IPV6_FAILURE_FATAL="no" NAME="em1" UUID="bdc14160-3cb6-48d7-b8b9-a382dc384add" ONBOOT="yes" HWADDR="F8:B1:56:C1:F9:8E" PEERDNS="yes" PEERROUTES="yes" BRIDGE=ovirtmgmt
I do realize that, the guides on the web for oVirt set BOOTPROTO to static. But at the office, we do not have the possibility of static IP, at the moment.
Can some one please tell me what could be wrong ?
dhcp should work too. The problem is with NetworkManager. You'll need to have static IPs though for the engine to be able to contact the hosts (as well as the hosts themselves, for hosted-engine HA at least), or you'll have problems if they for some reason get a different IP address from your dhcp server. Please post relevant logs: hosts - /var/log/ovirt-hosted-engine*/*, /var/log/vdsm/* engine - /var/log/ovirt-engine/* Thanks and best regards, -- Didi