[ovirt-users] what to do with 3.6 repos when upgrading to 4.0?

Yedidyah Bar David didi at redhat.com
Tue Jul 5 16:33:10 EDT 2016


On Tue, Jul 5, 2016 at 5:24 PM, Gianluca Cecchi
<gianluca.cecchi at gmail.com> wrote:
> On Tue, Jul 5, 2016 at 2:31 PM, Yaniv Dary <ydary at redhat.com> wrote:
>>
>>
>> On Tue, Jul 5, 2016 at 10:08 AM, Gianluca Cecchi
>> <gianluca.cecchi at gmail.com> wrote:
>>>
>>> Hello,
>>> having an engine at 3.6.5 and following
>>> https://www.ovirt.org/release/4.0.0/
>>> it is not clear in my opinion what to do with 3.6 repos if I want to
>>> upgrade to 4.0
>>> In fact if you strictly follow what indicated, you should only run
>>>
>>> yum update "ovirt-engine-setup*"
>>>
>>> but this eventually shows 3.6.7 packages.
>>> And I presume that also with 3.6 repos in places and already being in
>>> 3.6.7 the command above doesn't bring you to 4.0
>>>
>>> Also, you cannot run something like
>>>
>>> yum update ovirt-release
>>>
>>> because they are different packages:
>>> ovirt-release40
>>> and
>>> ovirt-release36
>>>
>>> In my flow I ran
>>>
>>> yum install http://resources.ovirt.org/pub/yum-repo/ovirt-release40.rpm
>>> and then disable ovrt-3.6, otherwise
>>> yum update "ovirt-engine-setup*"
>>
>>
>> Did you run "yum clean all"?
>>
>
>
> I reproduced on clean env where I installed only engine in 3.6.7 (can I test
> an install of 3.6.5 after 3.6.6 and 3.6.7 has come out?) and seems to work
> ok.
>
> See below steps done and some comments.
> The engine is a VM inside virt-manager where I installed CentOS 7.2 +
> updates, configured as infrastructure server.
>
> yum install http://resources.ovirt.org/pub/yum-repo/ovirt-release36.rpm
> yum install ovirt-engine
>
> engine-setup
>
> After this I have 3.6.7 and can log in into webadmin portal.
>
> Strange that with "yum update" now I see ovirt-release36 version 3.6.7
> proposed....
> It seems I already have 3.6.7 installed, but 3.6.6 as release rpm package...
> ?

Right. The release rpm in pub/yum-repo was for 3.6.6. The one in the 3.6 repos
was more up-to-date. Since both point at the same ovirt-3.6 repo on the ovirt
site, you got same release. There were some other minor changes in the release
rpm between 3.6.6 and 3.6.7, mostly related to gluster repos, as you can see
in [1]. Just in case, you can update your release rpm, then try 'yum update'
again (perhaps following 'yum clean all'), to see if there are actual updates
you missed due to the differences.

In any case, the rpm in yum-repo is now updated.

>
> my webdamin about page says:
> oVirt Engine Version: 3.6.7.5-1.el7.centos
>
> [root at ovengstand ovirt-engine]# yum update ovirt-release36
> Loaded plugins: fastestmirror, langpacks, versionlock
> Loading mirror speeds from cached hostfile
>  * base: mirrors.prometeus.net
>  * extras: mirrors.prometeus.net
>  * ovirt-3.6: ftp.plusline.net
>  * ovirt-3.6-epel: mirror.23media.de
>  * updates: mirrors.prometeus.net
> Resolving Dependencies
> --> Running transaction check
> ---> Package ovirt-release36.noarch 1:3.6.6-1 will be updated
> ---> Package ovirt-release36.noarch 1:3.6.7-1 will be an update
> --> Finished Dependency Resolution
>
> Dependencies Resolved
>
> ===========================================================================================================
>  Package                       Arch                 Version
> Repository               Size
> ===========================================================================================================
> Updating:
>  ovirt-release36               noarch               1:3.6.7-1
> ovirt-3.6                10 k
>
> Transaction Summary
> ===========================================================================================================
> Upgrade  1 Package
>
> Total download size: 10 k
> Is this ok [y/d/N]:
> Exiting on user command
>
>
> [root at ovengstand ~]# yum update "ovirt-engine-setup*"
> Loaded plugins: fastestmirror, langpacks, versionlock
> base
> | 3.6 kB  00:00:00
> centos-ovirt36
> | 2.9 kB  00:00:00
> extras
> | 3.4 kB  00:00:00
> ovirt-3.6
> | 2.9 kB  00:00:00
> ovirt-3.6-centos-gluster37
> | 2.9 kB  00:00:00
> ovirt-3.6-epel/x86_64/metalink
> |  22 kB  00:00:00
> ovirt-3.6-epel
> | 4.3 kB  00:00:00
> ovirt-3.6-patternfly1-noarch-epel
> | 3.0 kB  00:00:00
> updates
> | 3.4 kB  00:00:00
> virtio-win-stable
> | 3.0 kB  00:00:00
> (1/12): base/7/x86_64/group_gz
> | 155 kB  00:00:00
> (2/12): extras/7/x86_64/primary_db
> | 150 kB  00:00:00
> (3/12): ovirt-3.6/7/primary_db
> | 230 kB  00:00:00
> (4/12): centos-ovirt36/x86_64/primary_db
> | 125 kB  00:00:00
> (5/12): ovirt-3.6-epel/x86_64/group_gz
> | 170 kB  00:00:00
> (6/12): ovirt-3.6-centos-gluster37/7/x86_64/primary_db
> |  53 kB  00:00:00
> (7/12): ovirt-3.6-epel/x86_64/updateinfo
> | 576 kB  00:00:00
> (8/12): ovirt-3.6-patternfly1-noarch-epel/x86_64/primary_db
> | 2.2 kB  00:00:00
> (9/12): base/7/x86_64/primary_db
> | 5.3 MB  00:00:01
> (10/12): virtio-win-stable/primary_db
> | 2.0 kB  00:00:00
> (11/12): updates/7/x86_64/primary_db
> | 5.7 MB  00:00:01
> (12/12): ovirt-3.6-epel/x86_64/primary_db
> | 4.2 MB  00:00:01
> Determining fastest mirrors
>  * base: mirrors.prometeus.net
>  * extras: mirrors.prometeus.net
>  * ovirt-3.6: ftp.plusline.net
>  * ovirt-3.6-epel: mirror.23media.de
>  * updates: mirrors.prometeus.net
> No packages marked for update
> [root at ovengstand ~]#
>
>
> So I do have to install ovirt-release40, as in clean install, so that the
> guide page has to be changed.

Indeed, now pushed a change [2], will hopefully be merged soon.

[2] https://github.com/oVirt/ovirt-site/pull/348

>
> [root at ovengstand ~]# yum install
> http://resources.ovirt.org/pub/yum-repo/ovirt-release40.rpm
> Loaded plugins: fastestmirror, langpacks, versionlock
> ovirt-release40.rpm
> | 8.0 kB  00:00:00
> Examining /var/tmp/yum-root-pdbhfG/ovirt-release40.rpm:
> ovirt-release40-4.0.0-5.noarch
> Marking /var/tmp/yum-root-pdbhfG/ovirt-release40.rpm to be installed
> Resolving Dependencies
> --> Running transaction check
> ---> Package ovirt-release40.noarch 0:4.0.0-5 will be installed
> --> Finished Dependency Resolution
>
> Dependencies Resolved
>
> ===========================================================================================================
>  Package                      Arch                Version
> Repository                     Size
> ===========================================================================================================
> Installing:
>  ovirt-release40              noarch              4.0.0-5
> /ovirt-release40              5.2 k
>
> Transaction Summary
> ===========================================================================================================
> Install  1 Package
>
> Total size: 5.2 k
> Installed size: 5.2 k
> Is this ok [y/d/N]: y
> Downloading packages:
> Running transaction check
> Running transaction test
> Transaction test succeeded
> Running transaction
>   Installing : ovirt-release40-4.0.0-5.noarch
> 1/1
>   Verifying  : ovirt-release40-4.0.0-5.noarch
> 1/1
>
> Installed:
>   ovirt-release40.noarch 0:4.0.0-5
>
> Complete!
> [root at ovengstand ~]#
>
> I don't disable any repo
>
> [root at ovengstand ~]# yum clean all
> Loaded plugins: fastestmirror, langpacks, versionlock
> Repository virtio-win-stable is listed more than once in the configuration
> Cleaning repos: base centos-ovirt36 centos-ovirt40-candidate extras
> ovirt-3.6 ovirt-3.6-centos-gluster37
>               : ovirt-3.6-epel ovirt-3.6-patternfly1-noarch-epel ovirt-4.0
> ovirt-4.0-centos-gluster37
>               : ovirt-4.0-epel ovirt-4.0-patternfly1-noarch-epel updates
> virtio-win-stable
> Cleaning up everything
> Cleaning up list of fastest mirrors
> [root at ovengstand ~]#
>
>
> [root at ovengstand ~]# yum update "ovirt-engine-setup*"
> Loaded plugins: fastestmirror, langpacks, versionlock
> Repository virtio-win-stable is listed more than once in the configuration
> base
> | 3.6 kB  00:00:00
> centos-ovirt36
> | 2.9 kB  00:00:00
> centos-ovirt40-candidate
> | 3.4 kB  00:00:00
> extras
> | 3.4 kB  00:00:00
> ovirt-3.6
> | 2.9 kB  00:00:00
> ovirt-3.6-centos-gluster37
> | 2.9 kB  00:00:00
> ovirt-3.6-epel/x86_64/metalink
> |  22 kB  00:00:00
> ovirt-3.6-epel
> | 4.3 kB  00:00:00
> ovirt-3.6-patternfly1-noarch-epel
> | 3.0 kB  00:00:00
> ovirt-4.0
> | 2.9 kB  00:00:00
> ovirt-4.0-centos-gluster37
> | 2.9 kB  00:00:00
> ovirt-4.0-epel/x86_64/metalink
> |  22 kB  00:00:00
> ovirt-4.0-epel
> | 4.3 kB  00:00:00
> ovirt-4.0-patternfly1-noarch-epel
> | 3.0 kB  00:00:00
> updates
> | 3.4 kB  00:00:00
> virtio-win-stable
> | 3.0 kB  00:00:00
> (1/19): extras/7/x86_64/primary_db
> | 150 kB  00:00:00
> (2/19): base/7/x86_64/group_gz
> | 155 kB  00:00:00
> (3/19): centos-ovirt40-candidate/primary_db
> | 9.0 kB  00:00:00
> (4/19): ovirt-3.6/7/primary_db
> | 230 kB  00:00:00
> (5/19): ovirt-3.6-epel/x86_64/group_gz
> | 170 kB  00:00:00
> (6/19): centos-ovirt36/x86_64/primary_db
> | 125 kB  00:00:00
> (7/19): ovirt-3.6-centos-gluster37/7/x86_64/primary_db
> |  53 kB  00:00:00
> (8/19): ovirt-3.6-epel/x86_64/updateinfo
> | 576 kB  00:00:00
> (9/19): ovirt-4.0/7/primary_db
> |  80 kB  00:00:00
> (10/19): ovirt-4.0-centos-gluster37/x86_64/primary_db
> |  53 kB  00:00:00
> (11/19): ovirt-3.6-patternfly1-noarch-epel/x86_64/primary_db
> | 2.2 kB  00:00:00
> (12/19): base/7/x86_64/primary_db
> | 5.3 MB  00:00:01
> (13/19): ovirt-3.6-epel/x86_64/primary_db
> | 4.2 MB  00:00:01
> (14/19): ovirt-4.0-epel/x86_64/group_gz
> | 170 kB  00:00:00
> (15/19): ovirt-4.0-epel/x86_64/updateinfo
> | 576 kB  00:00:00
> (16/19): ovirt-4.0-patternfly1-noarch-epel/x86_64/primary_db
> | 2.2 kB  00:00:00
> (17/19): virtio-win-stable/primary_db
> | 2.0 kB  00:00:00
> (18/19): ovirt-4.0-epel/x86_64/primary_db
> | 4.2 MB  00:00:00
> (19/19): updates/7/x86_64/primary_db
> | 5.7 MB  00:00:02
> Determining fastest mirrors
>  * base: mirrors.prometeus.net
>  * extras: mirrors.prometeus.net
>  * ovirt-3.6: ftp.plusline.net
>  * ovirt-3.6-epel: mirror.23media.de
>  * ovirt-4.0: ftp.plusline.net
>  * ovirt-4.0-epel: mirror.23media.de
>  * updates: mirrors.prometeus.net
> Resolving Dependencies
> --> Running transaction check
> ---> Package ovirt-engine-setup.noarch 0:3.6.7.5-1.el7.centos will be
> updated
> ---> Package ovirt-engine-setup.noarch 0:4.0.0.6-1.el7.centos will be an
> update
> ---> Package ovirt-engine-setup-base.noarch 0:3.6.7.5-1.el7.centos will be
> updated
> ---> Package ovirt-engine-setup-base.noarch 0:4.0.0.6-1.el7.centos will be
> an update
> --> Processing Dependency: ovirt-engine-lib >= 4.0.0.6-1.el7.centos for
> package: ovirt-engine-setup-base-4.0.0.6-1.el7.centos.noarch
> --> Processing Dependency: otopi >= 1.5.0 for package:
> ovirt-engine-setup-base-4.0.0.6-1.el7.centos.noarch
> ---> Package ovirt-engine-setup-plugin-ovirt-engine.noarch
> 0:3.6.7.5-1.el7.centos will be updated
> ---> Package ovirt-engine-setup-plugin-ovirt-engine.noarch
> 0:4.0.0.6-1.el7.centos will be an update
> --> Processing Dependency: ovirt-engine-dwh-setup >= 4.0 for package:
> ovirt-engine-setup-plugin-ovirt-engine-4.0.0.6-1.el7.centos.noarch
> ---> Package ovirt-engine-setup-plugin-ovirt-engine-common.noarch
> 0:3.6.7.5-1.el7.centos will be updated
> ---> Package ovirt-engine-setup-plugin-ovirt-engine-common.noarch
> 0:4.0.0.6-1.el7.centos will be an update
> ---> Package ovirt-engine-setup-plugin-vmconsole-proxy-helper.noarch
> 0:3.6.7.5-1.el7.centos will be updated
> ---> Package ovirt-engine-setup-plugin-vmconsole-proxy-helper.noarch
> 0:4.0.0.6-1.el7.centos will be an update
> ---> Package ovirt-engine-setup-plugin-websocket-proxy.noarch
> 0:3.6.7.5-1.el7.centos will be updated
> ---> Package ovirt-engine-setup-plugin-websocket-proxy.noarch
> 0:4.0.0.6-1.el7.centos will be an update
> --> Running transaction check
> ---> Package otopi.noarch 0:1.4.2-1.el7.centos will be updated
> --> Processing Dependency: otopi = 1.4.2-1.el7.centos for package:
> otopi-java-1.4.2-1.el7.centos.noarch
> ---> Package otopi.noarch 0:1.5.0-1.el7.centos will be an update
> ---> Package ovirt-engine-dwh-setup.noarch 0:4.0.0-2.git38f5db5.el7.centos
> will be installed
> --> Processing Dependency: ovirt-engine-dwh >= 3.6.0 for package:
> ovirt-engine-dwh-setup-4.0.0-2.git38f5db5.el7.centos.noarch
> ---> Package ovirt-engine-lib.noarch 0:3.6.7.5-1.el7.centos will be updated
> ---> Package ovirt-engine-lib.noarch 0:4.0.0.6-1.el7.centos will be an
> update
> --> Running transaction check
> ---> Package otopi-java.noarch 0:1.4.2-1.el7.centos will be updated
> ---> Package otopi-java.noarch 0:1.5.0-1.el7.centos will be an update
> ---> Package ovirt-engine-dwh.noarch 0:4.0.0-2.git38f5db5.el7.centos will be
> installed
> --> Processing Dependency: postgresql-jdbc for package:
> ovirt-engine-dwh-4.0.0-2.git38f5db5.el7.centos.noarch
> --> Processing Dependency: dom4j for package:
> ovirt-engine-dwh-4.0.0-2.git38f5db5.el7.centos.noarch
> --> Processing Dependency: apache-commons-collections for package:
> ovirt-engine-dwh-4.0.0-2.git38f5db5.el7.centos.noarch
> --> Running transaction check
> ---> Package apache-commons-collections.noarch 0:3.2.1-22.el7_2 will be
> installed
> ---> Package dom4j.noarch 0:1.6.1-20.el7 will be installed
> --> Processing Dependency: jaxen-bootstrap >= 1.1-0.b7 for package:
> dom4j-1.6.1-20.el7.noarch
> --> Processing Dependency: xpp3 for package: dom4j-1.6.1-20.el7.noarch
> --> Processing Dependency: ws-jaxme for package: dom4j-1.6.1-20.el7.noarch
> --> Processing Dependency: relaxngDatatype for package:
> dom4j-1.6.1-20.el7.noarch
> --> Processing Dependency: msv-xsdlib for package: dom4j-1.6.1-20.el7.noarch
> --> Processing Dependency: msv-msv for package: dom4j-1.6.1-20.el7.noarch
> --> Processing Dependency: isorelax for package: dom4j-1.6.1-20.el7.noarch
> --> Processing Dependency: bea-stax for package: dom4j-1.6.1-20.el7.noarch
> ---> Package postgresql-jdbc.noarch 0:9.2.1002-5.el7 will be installed
> --> Running transaction check
> ---> Package bea-stax.noarch 0:1.2.0-9.el7 will be installed
> ---> Package isorelax.noarch 1:0-0.15.release20050331.el7 will be installed
> ---> Package jaxen.noarch 0:1.1.3-11.el7 will be installed
> --> Processing Dependency: jdom >= 1.0-0.rc1.1jpp for package:
> jaxen-1.1.3-11.el7.noarch
> ---> Package msv-msv.noarch 1:2013.5.1-6.el7 will be installed
> ---> Package msv-xsdlib.noarch 1:2013.5.1-6.el7 will be installed
> ---> Package relaxngDatatype.noarch 0:1.0-11.el7 will be installed
> ---> Package ws-jaxme.noarch 0:0.5.2-10.el7 will be installed
> --> Processing Dependency: hsqldb for package: ws-jaxme-0.5.2-10.el7.noarch
> --> Processing Dependency: antlr for package: ws-jaxme-0.5.2-10.el7.noarch
> ---> Package xpp3.noarch 0:1.1.3.8-11.el7 will be installed
> --> Running transaction check
> ---> Package antlr-tool.noarch 0:2.7.7-30.el7 will be installed
> ---> Package hsqldb.noarch 1:1.8.1.3-13.el7 will be installed
> ---> Package jdom.noarch 0:1.1.3-6.el7 will be installed
> --> Finished Dependency Resolution
>
> Dependencies Resolved
>
> ===========================================================================================================
>  Package                                           Arch    Version
> Repository  Size
> ===========================================================================================================
> Updating:
>  ovirt-engine-setup                                noarch
> 4.0.0.6-1.el7.centos           ovirt-4.0  8.6 k
>  ovirt-engine-setup-base                           noarch
> 4.0.0.6-1.el7.centos           ovirt-4.0   95 k
>  ovirt-engine-setup-plugin-ovirt-engine            noarch
> 4.0.0.6-1.el7.centos           ovirt-4.0  161 k
>  ovirt-engine-setup-plugin-ovirt-engine-common     noarch
> 4.0.0.6-1.el7.centos           ovirt-4.0   80 k
>  ovirt-engine-setup-plugin-vmconsole-proxy-helper  noarch
> 4.0.0.6-1.el7.centos           ovirt-4.0   27 k
>  ovirt-engine-setup-plugin-websocket-proxy         noarch
> 4.0.0.6-1.el7.centos           ovirt-4.0   26 k
> Installing for dependencies:
>  antlr-tool                                        noarch  2.7.7-30.el7
> base       357 k
>  apache-commons-collections                        noarch  3.2.1-22.el7_2
> updates    509 k
>  bea-stax                                          noarch  1.2.0-9.el7
> base       176 k
>  dom4j                                             noarch  1.6.1-20.el7
> base       277 k
>  hsqldb                                            noarch  1:1.8.1.3-13.el7
> base       950 k
>  isorelax                                          noarch
> 1:0-0.15.release20050331.el7   base        75 k
>  jaxen                                             noarch  1.1.3-11.el7
> base       204 k
>  jdom                                              noarch  1.1.3-6.el7
> base       174 k
>  msv-msv                                           noarch  1:2013.5.1-6.el7
> base       3.7 M
>  msv-xsdlib                                        noarch  1:2013.5.1-6.el7
> base       1.1 M
>  ovirt-engine-dwh                                  noarch
> 4.0.0-2.git38f5db5.el7.centos  ovirt-4.0  2.1 M
>  ovirt-engine-dwh-setup                            noarch
> 4.0.0-2.git38f5db5.el7.centos  ovirt-4.0   69 k
>  postgresql-jdbc                                   noarch  9.2.1002-5.el7
> base       447 k
>  relaxngDatatype                                   noarch  1.0-11.el7
> base        15 k
>  ws-jaxme                                          noarch  0.5.2-10.el7
> base       1.1 M
>  xpp3                                              noarch  1.1.3.8-11.el7
> base       336 k
> Updating for dependencies:
>  otopi                                             noarch
> 1.5.0-1.el7.centos             ovirt-4.0  160 k
>  otopi-java                                        noarch
> 1.5.0-1.el7.centos             ovirt-4.0   25 k
>  ovirt-engine-lib                                  noarch
> 4.0.0.6-1.el7.centos           ovirt-4.0   28 k
>
> Transaction Summary
> ===========================================================================================================
> Install             ( 16 Dependent packages)
> Upgrade  6 Packages (+ 3 Dependent packages)
>
> Total download size: 12 M
> Is this ok [y/d/N]:
>
> So ovirt 4.0 pulled in.
>
>
> [root at ovengstand ~]# engine-setup
> [ INFO  ] Stage: Initializing
> [ INFO  ] Stage: Environment setup
>           Configuration files:
> ['/etc/ovirt-engine-setup.conf.d/10-packaging-jboss.conf',
> '/etc/ovirt-engine-setup.conf.d/10-packaging.conf',
> '/etc/ovirt-engine-setup.conf.d/20-setup-ovirt-post.conf']
>           Log file:
> /var/log/ovirt-engine/setup/ovirt-engine-setup-20160705100227-wxf90i.log
>           Version: otopi-1.5.0 (otopi-1.5.0-1.el7.centos)
> [ INFO  ] Stage: Environment packages setup
> [ INFO  ] Stage: Programs detection
> [ INFO  ] Stage: Environment setup
> [ INFO  ] Stage: Environment customization
>
>           --== PRODUCT OPTIONS ==--
>
>           Please note: Data Warehouse is required for the engine. If you
> choose to not configure it on this host, you have to configure it on a
> remote host, and then configure the engine on this host so that it can
> access the database of the remote Data Warehouse host.
>           Configure Data Warehouse on this host (Yes, No) [Yes]:
>
>           --== PACKAGES ==--
>
> [ INFO  ] Checking for product updates...
>           Setup has found updates for some packages:
>           PACKAGE: [install] aopalliance-1.0-8.el7.noarch
>           PACKAGE: [install] apache-commons-beanutils-1.8.3-14.el7.noarch
>           PACKAGE: [install] apache-commons-compress-1.5-4.el7.noarch
>           PACKAGE: [install] apache-commons-configuration-1.9-8.el7.noarch
>           PACKAGE: [install] apache-commons-digester-1.8.1-19.el7.noarch
>           PACKAGE: [install] apache-commons-jexl-2.1.1-9.el7.noarch
>           PACKAGE: [install] apache-commons-jxpath-1.3-20.el7.noarch
>           PACKAGE: [install] apache-commons-net-3.2-8.el7.centos.noarch
>           PACKAGE: [install] apache-commons-vfs-2.0-11.el7.noarch
>           PACKAGE: [install] jsch-0.1.50-5.el7.noarch
>           PACKAGE: [install] jzlib-1.1.1-6.el7.noarch
>           PACKAGE: [updated] ovirt-engine-3.6.7.5-1.el7.centos.noarch
>           PACKAGE: [update] ovirt-engine-4.0.0.6-1.el7.centos.noarch
>           PACKAGE: [updated]
> ovirt-engine-backend-3.6.7.5-1.el7.centos.noarch
>           PACKAGE: [update] ovirt-engine-backend-4.0.0.6-1.el7.centos.noarch
>           PACKAGE: [install]
> ovirt-engine-dashboard-1.0.0-0.2.20160610git5d210ea.el7.centos.noarch
>           PACKAGE: [updated]
> ovirt-engine-dbscripts-3.6.7.5-1.el7.centos.noarch
>           PACKAGE: [update]
> ovirt-engine-dbscripts-4.0.0.6-1.el7.centos.noarch
>           PACKAGE: [updated]
> ovirt-engine-extension-aaa-jdbc-1.0.7-1.el7.noarch
>           PACKAGE: [update]
> ovirt-engine-extension-aaa-jdbc-1.1.0-1.el7.noarch
>           PACKAGE: [updated]
> ovirt-engine-extensions-api-impl-3.6.7.5-1.el7.centos.noarch
>           PACKAGE: [update]
> ovirt-engine-extensions-api-impl-4.0.0.6-1.el7.centos.noarch
>           PACKAGE: [updated]
> ovirt-engine-restapi-3.6.7.5-1.el7.centos.noarch
>           PACKAGE: [update] ovirt-engine-restapi-4.0.0.6-1.el7.centos.noarch
>           PACKAGE: [updated] ovirt-engine-tools-3.6.7.5-1.el7.centos.noarch
>           PACKAGE: [update] ovirt-engine-tools-4.0.0.6-1.el7.centos.noarch
>           PACKAGE: [updated]
> ovirt-engine-tools-backup-3.6.7.5-1.el7.centos.noarch
>           PACKAGE: [update]
> ovirt-engine-tools-backup-4.0.0.6-1.el7.centos.noarch
>           PACKAGE: [updated]
> ovirt-engine-userportal-3.6.7.5-1.el7.centos.noarch
>           PACKAGE: [update]
> ovirt-engine-userportal-4.0.0.6-1.el7.centos.noarch
>           PACKAGE: [updated]
> ovirt-engine-vmconsole-proxy-helper-3.6.7.5-1.el7.centos.noarch
>           PACKAGE: [update]
> ovirt-engine-vmconsole-proxy-helper-4.0.0.6-1.el7.centos.noarch
>           PACKAGE: [updated]
> ovirt-engine-webadmin-portal-3.6.7.5-1.el7.centos.noarch
>           PACKAGE: [update]
> ovirt-engine-webadmin-portal-4.0.0.6-1.el7.centos.noarch
>           PACKAGE: [updated]
> ovirt-engine-websocket-proxy-3.6.7.5-1.el7.centos.noarch
>           PACKAGE: [update]
> ovirt-engine-websocket-proxy-4.0.0.6-1.el7.centos.noarch
>           PACKAGE: [updated] ovirt-engine-wildfly-8.2.1-1.el7.x86_64
>           PACKAGE: [update] ovirt-engine-wildfly-10.0.0-1.el7.x86_64
>           PACKAGE: [updated] ovirt-engine-wildfly-overlay-8.0.5-1.el7.noarch
>           PACKAGE: [update] ovirt-engine-wildfly-overlay-10.0.0-1.el7.noarch
>           PACKAGE: [updated] ovirt-host-deploy-1.4.1-1.el7.centos.noarch
>           PACKAGE: [update] ovirt-host-deploy-1.5.0-1.el7.centos.noarch
>           PACKAGE: [updated]
> ovirt-host-deploy-java-1.4.1-1.el7.centos.noarch
>           PACKAGE: [update] ovirt-host-deploy-java-1.5.0-1.el7.centos.noarch
>           PACKAGE: [updated] ovirt-image-uploader-3.6.0-1.el7.centos.noarch
>           PACKAGE: [update] ovirt-image-uploader-4.0.0-1.el7.centos.noarch
>           PACKAGE: [updated] ovirt-iso-uploader-3.6.0-1.el7.centos.noarch
>           PACKAGE: [update] ovirt-iso-uploader-4.0.0-1.el7.centos.noarch
>           PACKAGE: [install] python-babel-0.9.6-8.el7.noarch
>           PACKAGE: [install] python-enum34-1.0.4-1.el7.noarch
>           PACKAGE: [install] python-jinja2-2.7.2-2.el7.noarch
>           PACKAGE: [install] python-markupsafe-0.11-10.el7.x86_64
>           PACKAGE: [install]
> python-ovirt-engine-sdk4-4.0.0-0.3.a3.el7.centos.x86_64
>           PACKAGE: [updated] vdsm-jsonrpc-java-1.1.12-1.el7.centos.noarch
>           PACKAGE: [update] vdsm-jsonrpc-java-1.2.3-1.el7.centos.noarch
>           PACKAGE: [install] 1:xmlrpc-client-3.1.3-8.el7.noarch
>           PACKAGE: [install] 1:xmlrpc-common-3.1.3-8.el7.noarch
>           PACKAGE: [install] xz-java-1.3-3.el7.noarch
>           do you wish to update them now? (Yes, No) [Yes]:
> [ INFO  ] Checking for an update for Setup...
>
>           --== NETWORK CONFIGURATION ==--
>
> [WARNING] Failed to resolve ovengstand.localdomain.local using DNS, it can
> be resolved only locally
>           Setup can automatically configure the firewall on this system.
>           Note: automatic configuration of the firewall may overwrite
> current settings.
>           Do you want Setup to configure the firewall? (Yes, No) [Yes]:
> [ INFO  ] firewalld will be configured as firewall manager.
>
>           --== DATABASE CONFIGURATION ==--
>
>           Where is the DWH database located? (Local, Remote) [Local]:
>           Setup can configure the local postgresql server automatically for
> the DWH to run. This may conflict with existing applications.
>           Would you like Setup to automatically configure postgresql and
> create DWH database, or prefer to perform that manually? (Automatic, Manual)
> [Automatic]:
>
>           --== OVIRT ENGINE CONFIGURATION ==--
>
>
>           --== STORAGE CONFIGURATION ==--
>
>
>           --== PKI CONFIGURATION ==--
>
>
>           --== APACHE CONFIGURATION ==--
>
>
>           --== SYSTEM CONFIGURATION ==--
>
>
>           --== MISC CONFIGURATION ==--
>
>           Please choose Data Warehouse sampling scale:
>           (1) Basic
>           (2) Full
>           (1, 2)[1]:
>
>           --== END OF CONFIGURATION ==--
>
> [ INFO  ] Stage: Setup validation
>           During execution engine service will be stopped (OK, Cancel) [OK]:
> [WARNING] Less than 16384MB of memory is available
> [ INFO  ] Cleaning stale zombie tasks and commands
>
>           --== CONFIGURATION PREVIEW ==--
>
>           Default SAN wipe after delete           : False
>           Firewall manager                        : firewalld
>           Update Firewall                         : True
>           Host FQDN                               :
> ovengstand.localdomain.local
>           Upgrade packages                        : True
>           Engine database secured connection      : False
>           Engine database host                    : localhost
>           Engine database user name               : engine
>           Engine database name                    : engine
>           Engine database port                    : 5432
>           Engine database host name validation    : False
>           DWH database secured connection         : False
>           DWH database host                       : localhost
>           DWH database user name                  : ovirt_engine_history
>           DWH database name                       : ovirt_engine_history
>           DWH database port                       : 5432
>           DWH database host name validation       : False
>           Engine installation                     : True
>           PKI organization                        : localdomain.local
>           NFS mount point                         : /var/lib/exports/iso
>           DWH installation                        : True
>           Configure local DWH database            : True
>           Engine Host FQDN                        :
> ovengstand.localdomain.local
>           Configure VMConsole Proxy               : True
>           Configure WebSocket Proxy               : True
>
>           Please confirm installation settings (OK, Cancel) [OK]:
> [ INFO  ] Cleaning async tasks and compensations
> [ INFO  ] Unlocking existing entities
> [ INFO  ] Checking the Engine database consistency
> [ INFO  ] Stage: Transaction setup
> [ INFO  ] Stopping engine service
> [ INFO  ] Stopping ovirt-fence-kdump-listener service
> [ INFO  ] Stopping dwh service
> [ INFO  ] Stopping websocket-proxy service
> [ INFO  ] Stage: Misc configuration
> [ INFO  ] Stage: Package installation
> [ INFO  ] Yum Status: Downloading Packages
> [ INFO  ] Yum Download/Verify: aopalliance-1.0-8.el7.noarch
> [ INFO  ] Yum Download/Verify: apache-commons-beanutils-1.8.3-14.el7.noarch
> [ INFO  ] Yum Download/Verify: apache-commons-compress-1.5-4.el7.noarch
> [ INFO  ] Yum Download/Verify: apache-commons-configuration-1.9-8.el7.noarch
> [ INFO  ] Yum Download/Verify: apache-commons-digester-1.8.1-19.el7.noarch
> [ INFO  ] Yum Download/Verify: apache-commons-jexl-2.1.1-9.el7.noarch
> [ INFO  ] Yum Download/Verify: apache-commons-jxpath-1.3-20.el7.noarch
> [ INFO  ] Yum Download/Verify: apache-commons-net-3.2-8.el7.centos.noarch
> [ INFO  ] Yum Download/Verify: apache-commons-vfs-2.0-11.el7.noarch
> [ INFO  ] Yum Download/Verify: jsch-0.1.50-5.el7.noarch
> [ INFO  ] Yum Download/Verify: jzlib-1.1.1-6.el7.noarch
> [ INFO  ] Yum Download/Verify: ovirt-engine-4.0.0.6-1.el7.centos.noarch
> [ INFO  ] Yum Download/Verify:
> ovirt-engine-backend-4.0.0.6-1.el7.centos.noarch
> [ INFO  ] Yum Download/Verify:
> ovirt-engine-dashboard-1.0.0-0.2.20160610git5d210ea.el7.centos.noarch
> [ INFO  ] Yum Download/Verify:
> ovirt-engine-dbscripts-4.0.0.6-1.el7.centos.noarch
> [ INFO  ] Yum Download/Verify:
> ovirt-engine-extension-aaa-jdbc-1.1.0-1.el7.noarch
> [ INFO  ] Yum Download/Verify:
> ovirt-engine-extensions-api-impl-4.0.0.6-1.el7.centos.noarch
> [ INFO  ] Yum Download/Verify:
> ovirt-engine-restapi-4.0.0.6-1.el7.centos.noarch
> [ INFO  ] Yum Download/Verify:
> ovirt-engine-tools-4.0.0.6-1.el7.centos.noarch
> [ INFO  ] Yum Download/Verify:
> ovirt-engine-tools-backup-4.0.0.6-1.el7.centos.noarch
> [ INFO  ] Yum Download/Verify:
> ovirt-engine-userportal-4.0.0.6-1.el7.centos.noarch
> [ INFO  ] Yum Download/Verify:
> ovirt-engine-vmconsole-proxy-helper-4.0.0.6-1.el7.centos.noarch
> [ INFO  ] Yum Download/Verify:
> ovirt-engine-webadmin-portal-4.0.0.6-1.el7.centos.noarch
> [ INFO  ] Yum Download/Verify:
> ovirt-engine-websocket-proxy-4.0.0.6-1.el7.centos.noarch
> [ INFO  ] Yum Download/Verify: ovirt-engine-wildfly-10.0.0-1.el7.x86_64
> [ INFO  ] Yum Download/Verify:
> ovirt-engine-wildfly-overlay-10.0.0-1.el7.noarch
> [ INFO  ] Yum Download/Verify: ovirt-host-deploy-1.5.0-1.el7.centos.noarch
> [ INFO  ] Yum Download/Verify:
> ovirt-host-deploy-java-1.5.0-1.el7.centos.noarch
> [ INFO  ] Yum Download/Verify:
> ovirt-image-uploader-4.0.0-1.el7.centos.noarch
> [ INFO  ] Yum Download/Verify: ovirt-iso-uploader-4.0.0-1.el7.centos.noarch
> [ INFO  ] Yum Download/Verify: ovirt-vmconsole-1.0.3-1.el7.centos.noarch
> [ INFO  ] Yum Download/Verify:
> ovirt-vmconsole-proxy-1.0.3-1.el7.centos.noarch
> [ INFO  ] Yum Download/Verify: python-babel-0.9.6-8.el7.noarch
> [ INFO  ] Yum Download/Verify: python-enum34-1.0.4-1.el7.noarch
> [ INFO  ] Yum Download/Verify: python-jinja2-2.7.2-2.el7.noarch
> [ INFO  ] Yum Download/Verify: python-markupsafe-0.11-10.el7.x86_64
> [ INFO  ] Yum Download/Verify:
> python-ovirt-engine-sdk4-4.0.0-0.3.a3.el7.centos.x86_64
> [ INFO  ] Yum Download/Verify: vdsm-jsonrpc-java-1.2.3-1.el7.centos.noarch
> [ INFO  ] Yum Download/Verify: 1:xmlrpc-client-3.1.3-8.el7.noarch
> [ INFO  ] Yum Download/Verify: 1:xmlrpc-common-3.1.3-8.el7.noarch
> [ INFO  ] Yum Download/Verify: xz-java-1.3-3.el7.noarch
> [ INFO  ] Yum Status: Check Package Signatures
> [ INFO  ] Yum Status: Running Test Transaction
> [ INFO  ] Yum Status: Running Transaction
> [ INFO  ] Yum install: 1/62: apache-commons-beanutils-1.8.3-14.el7.noarch
> [ INFO  ] Yum install: 2/62: apache-commons-jxpath-1.3-20.el7.noarch
> [ INFO  ] Yum update: 3/62:
> ovirt-engine-extensions-api-impl-4.0.0.6-1.el7.centos.noarch
> [ INFO  ] Yum update: 4/62:
> ovirt-engine-extension-aaa-jdbc-1.1.0-1.el7.noarch
> [ INFO  ] Yum install: 5/62: apache-commons-digester-1.8.1-19.el7.noarch
> [ INFO  ] Yum install: 6/62: apache-commons-net-3.2-8.el7.centos.noarch
> [ INFO  ] Yum update: 7/62:
> ovirt-engine-tools-backup-4.0.0.6-1.el7.centos.noarch
> [ INFO  ] Yum install: 8/62: python-markupsafe-0.11-10.el7.x86_64
> [ INFO  ] Yum update: 9/62:
> ovirt-engine-websocket-proxy-4.0.0.6-1.el7.centos.noarch
> [ INFO  ] Yum update: 10/62: ovirt-vmconsole-1.0.3-1.el7.centos.noarch
> [ INFO  ] Yum update: 11/62: ovirt-vmconsole-proxy-1.0.3-1.el7.centos.noarch
> [ INFO  ] Yum update: 12/62:
> ovirt-engine-vmconsole-proxy-helper-4.0.0.6-1.el7.centos.noarch
> [ INFO  ] Yum install: 13/62: python-babel-0.9.6-8.el7.noarch
> [ INFO  ] Yum install: 14/62: python-jinja2-2.7.2-2.el7.noarch
> [ INFO  ] Yum install: 15/62: aopalliance-1.0-8.el7.noarch
> [ INFO  ] Yum update: 16/62:
> ovirt-engine-wildfly-overlay-10.0.0-1.el7.noarch
> [ INFO  ] Yum install: 17/62: python-enum34-1.0.4-1.el7.noarch
> [ INFO  ] Yum install: 18/62:
> python-ovirt-engine-sdk4-4.0.0-0.3.a3.el7.centos.x86_64
> [ INFO  ] Yum update: 19/62: ovirt-image-uploader-4.0.0-1.el7.centos.noarch
> [ INFO  ] Yum update: 20/62: ovirt-iso-uploader-4.0.0-1.el7.centos.noarch
> [ INFO  ] Yum update: 21/62: ovirt-engine-wildfly-10.0.0-1.el7.x86_64
> [ INFO  ] Yum update: 22/62: vdsm-jsonrpc-java-1.2.3-1.el7.centos.noarch
> [ INFO  ] Yum install: 23/62: 1:xmlrpc-common-3.1.3-8.el7.noarch
> [ INFO  ] Yum install: 24/62: 1:xmlrpc-client-3.1.3-8.el7.noarch
> [ INFO  ] Yum install: 25/62: jzlib-1.1.1-6.el7.noarch
> [ INFO  ] Yum install: 26/62: jsch-0.1.50-5.el7.noarch
> [ INFO  ] Yum install: 27/62: apache-commons-vfs-2.0-11.el7.noarch
> [ INFO  ] Yum update: 28/62: ovirt-host-deploy-1.5.0-1.el7.centos.noarch
> [ INFO  ] Yum update: 29/62:
> ovirt-host-deploy-java-1.5.0-1.el7.centos.noarch
> [ INFO  ] Yum install: 30/62: xz-java-1.3-3.el7.noarch
> [ INFO  ] Yum install: 31/62: apache-commons-compress-1.5-4.el7.noarch
> [ INFO  ] Yum install: 32/62: apache-commons-jexl-2.1.1-9.el7.noarch
> [ INFO  ] Yum install: 33/62: apache-commons-configuration-1.9-8.el7.noarch
> [ INFO  ] Yum install: 34/62:
> ovirt-engine-dashboard-1.0.0-0.2.20160610git5d210ea.el7.centos.noarch
> [ INFO  ] Yum update: 35/62:
> ovirt-engine-webadmin-portal-4.0.0.6-1.el7.centos.noarch
> [ INFO  ] Yum update: 36/62:
> ovirt-engine-backend-4.0.0.6-1.el7.centos.noarch
> [ INFO  ] Yum update: 37/62:
> ovirt-engine-restapi-4.0.0.6-1.el7.centos.noarch
> [ INFO  ] Yum update: 38/62:
> ovirt-engine-dbscripts-4.0.0.6-1.el7.centos.noarch
> [ INFO  ] Yum update: 39/62: ovirt-engine-tools-4.0.0.6-1.el7.centos.noarch
> [ INFO  ] Yum update: 40/62:
> ovirt-engine-userportal-4.0.0.6-1.el7.centos.noarch
> [ INFO  ] Yum update: 41/62: ovirt-engine-4.0.0.6-1.el7.centos.noarch
> [ INFO  ] Yum updated: 42/62: ovirt-engine-backend
> [ INFO  ] Yum updated: 43/62: ovirt-engine-dbscripts
> [ INFO  ] Yum updated: 44/62: ovirt-engine-restapi
> [ INFO  ] Yum updated: 45/62: ovirt-engine-tools
> [ INFO  ] Yum updated: 46/62: ovirt-engine-userportal
> [ INFO  ] Yum updated: 47/62: ovirt-engine
> [ INFO  ] Yum updated: 48/62: ovirt-engine-webadmin-portal
> [ INFO  ] Yum updated: 49/62: ovirt-engine-vmconsole-proxy-helper
> [ INFO  ] Yum updated: 50/62: ovirt-vmconsole-proxy
> [ INFO  ] Yum updated: 51/62: ovirt-engine-extension-aaa-jdbc
> [ INFO  ] Yum updated: 52/62: ovirt-host-deploy-java
> [ INFO  ] Yum updated: 53/62: ovirt-host-deploy
> [ INFO  ] Yum updated: 54/62: ovirt-engine-extensions-api-impl
> [ INFO  ] Yum updated: 55/62: ovirt-vmconsole
> [ INFO  ] Yum Verify: 56/62: ovirt-vmconsole.noarch 0:1.0.2-1.el7.centos -
> ud
> [ INFO  ] Yum Verify: 57/62: ovirt-host-deploy-java.noarch
> 0:1.4.1-1.el7.centos - ud
> [ INFO  ] Yum Verify: 58/62: vdsm-jsonrpc-java.noarch 0:1.1.12-1.el7.centos
> - ud
> [ INFO  ] Yum Verify: 59/62: ovirt-engine-tools.noarch
> 0:3.6.7.5-1.el7.centos - ud
> [ INFO  ] Yum Verify: 60/62: ovirt-engine-webadmin-portal.noarch
> 0:3.6.7.5-1.el7.centos - ud
> [ INFO  ] Yum Verify: 61/62: ovirt-host-deploy.noarch 0:1.4.1-1.el7.centos -
> ud
> [ INFO  ] Yum Verify: 62/62: ovirt-iso-uploader.noarch 0:3.6.0-1.el7.centos
> - ud
> [ INFO  ] Stage: Misc configuration
> [ INFO  ] Upgrading CA
> [ INFO  ] Creating PostgreSQL 'ovirt_engine_history' database
> [ INFO  ] Configuring PostgreSQL
> [ INFO  ] Backing up database localhost:engine to
> '/var/lib/ovirt-engine/backups/engine-20160705100516.tUWN3d.dump'.
> [ INFO  ] Creating/refreshing Engine database schema
> [ INFO  ] Creating/refreshing DWH database schema
> [ INFO  ] Configuring WebSocket Proxy
> [ INFO  ] Creating/refreshing Engine 'internal' domain database schema
> [ INFO  ] Generating post install configuration file
> '/etc/ovirt-engine-setup.conf.d/20-setup-ovirt-post.conf'
> [ INFO  ] Stage: Transaction commit
> [ INFO  ] Stage: Closing up
> [ INFO  ] Starting engine service
> [ INFO  ] Starting dwh service
> [ INFO  ] Restarting ovirt-vmconsole proxy service
>
>           --== SUMMARY ==--
>
> [ INFO  ] Restarting httpd
>           Web access is enabled at:
>               http://ovengstand.localdomain.local:80/ovirt-engine
>               https://ovengstand.localdomain.local:443/ovirt-engine
>           Internal CA
> 32:05:89:A7:C7:5E:B6:15:6D:F7:49:8A:6E:7D:FF:C6:82:BD:19:F3
>           SSH fingerprint: 07:ef:b1:78:74:12:91:8c:e3:84:b4:26:a8:c5:e4:88
> [WARNING] Less than 16384MB of memory is available
>
>           --== END OF SUMMARY ==--
>
> [ INFO  ] Stage: Clean up
>           Log file is located at
> /var/log/ovirt-engine/setup/ovirt-engine-setup-20160705100227-wxf90i.log
> [ INFO  ] Generating answer file
> '/var/lib/ovirt-engine/setup/answers/20160705100753-setup.conf'
> [ INFO  ] Stage: Pre-termination
> [ INFO  ] Stage: Termination
> [ INFO  ] Execution of setup completed successfully
> [root at ovengstand ~]#
>
>
>
> But for example I have double repo entries for virtio-win-stable and for
> example running now when I'm already on 4.0 it still proposed the ovirt36
> update for release file:

Explained above. That's unrelated to the double repos.

One you finished upgrading to 4.0, you can safely remove the 3.6 repo files:

# rm /etc/yum.repos.d/ovirt-3.6*
# yum remove ovirt-release36

But generally speaking, there is also no harm in keeping them.

>
>
> [root at ovengstand ~]# yum clean all
> Loaded plugins: fastestmirror, langpacks, versionlock
> Repository virtio-win-stable is listed more than once in the configuration
> Cleaning repos: base centos-ovirt36 centos-ovirt40-candidate extras
> ovirt-3.6 ovirt-3.6-centos-gluster37
>               : ovirt-3.6-epel ovirt-3.6-patternfly1-noarch-epel ovirt-4.0
> ovirt-4.0-centos-gluster37
>               : ovirt-4.0-epel ovirt-4.0-patternfly1-noarch-epel updates
> virtio-win-stable
> Cleaning up everything
> Cleaning up list of fastest mirrors
>
>
> [root at ovengstand ~]# yum update
> Loaded plugins: fastestmirror, langpacks, versionlock
> Repository virtio-win-stable is listed more than once in the configuration
> base
> | 3.6 kB  00:00:00
> centos-ovirt36
> | 2.9 kB  00:00:00
> centos-ovirt40-candidate
> | 3.4 kB  00:00:00
> extras
> | 3.4 kB  00:00:00
> ovirt-3.6
> | 2.9 kB  00:00:00
> ovirt-3.6-centos-gluster37
> | 2.9 kB  00:00:00
> ovirt-3.6-epel/x86_64/metalink
> |  21 kB  00:00:00
> ovirt-3.6-epel
> | 4.3 kB  00:00:00
> ovirt-3.6-patternfly1-noarch-epel
> | 3.0 kB  00:00:00
> ovirt-4.0
> | 2.9 kB  00:00:00
> ovirt-4.0-centos-gluster37
> | 2.9 kB  00:00:00
> ovirt-4.0-epel/x86_64/metalink
> |  21 kB  00:00:00
> ovirt-4.0-epel
> | 4.3 kB  00:00:00
> ovirt-4.0-patternfly1-noarch-epel
> | 3.0 kB  00:00:00
> updates
> | 3.4 kB  00:00:00
> virtio-win-stable
> | 3.0 kB  00:00:00
> (1/19): base/7/x86_64/group_gz
> | 155 kB  00:00:00
> (2/19): extras/7/x86_64/primary_db
> | 150 kB  00:00:00
> (3/19): centos-ovirt40-candidate/primary_db
> | 9.0 kB  00:00:00
> (4/19): centos-ovirt36/x86_64/primary_db
> | 125 kB  00:00:00
> (5/19): ovirt-3.6/7/primary_db
> | 230 kB  00:00:00
> (6/19): ovirt-3.6-epel/x86_64/group_gz
> | 170 kB  00:00:00
> (7/19): ovirt-3.6-centos-gluster37/7/x86_64/primary_db
> |  53 kB  00:00:00
> (8/19): ovirt-3.6-epel/x86_64/updateinfo
> | 576 kB  00:00:00
> (9/19): ovirt-4.0/7/primary_db
> |  80 kB  00:00:00
> (10/19): ovirt-4.0-centos-gluster37/x86_64/primary_db
> |  53 kB  00:00:00
> (11/19): ovirt-3.6-patternfly1-noarch-epel/x86_64/primary_db
> | 2.2 kB  00:00:00
> (12/19): base/7/x86_64/primary_db
> | 5.3 MB  00:00:01
> (13/19): ovirt-3.6-epel/x86_64/primary_db
> | 4.2 MB  00:00:01
> (14/19): ovirt-4.0-epel/x86_64/group_gz
> | 170 kB  00:00:00
> (15/19): ovirt-4.0-epel/x86_64/updateinfo
> | 576 kB  00:00:00
> (16/19): ovirt-4.0-patternfly1-noarch-epel/x86_64/primary_db
> | 2.2 kB  00:00:00
> (17/19): ovirt-4.0-epel/x86_64/primary_db
> | 4.2 MB  00:00:00
> (18/19): virtio-win-stable/primary_db
> | 2.0 kB  00:00:00
> (19/19): updates/7/x86_64/primary_db
> | 5.7 MB  00:00:01
> Determining fastest mirrors
>  * base: it.centos.contactlab.it
>  * extras: it.centos.contactlab.it
>  * ovirt-3.6: ftp.plusline.net
>  * ovirt-3.6-epel: mirror.23media.de
>  * ovirt-4.0: ftp.plusline.net
>  * ovirt-4.0-epel: mirror.23media.de
>  * updates: it.centos.contactlab.it
> Resolving Dependencies
> --> Running transaction check
> ---> Package ovirt-release36.noarch 1:3.6.6-1 will be updated
> ---> Package ovirt-release36.noarch 1:3.6.7-1 will be an update
> ---> Package ovirt-setup-lib.noarch 0:1.0.1-1.el7.centos will be updated
> ---> Package ovirt-setup-lib.noarch 0:1.0.2-1.el7.centos will be an update
> ---> Package python-websockify.noarch 0:0.6.0-2.el7 will be updated
> ---> Package python-websockify.noarch 0:0.8.0-1.el7 will be an update
> --> Finished Dependency Resolution
>
> Dependencies Resolved
>
> ===========================================================================================================
>  Package                  Arch          Version
> Repository                       Size
> ===========================================================================================================
> Updating:
>  ovirt-release36          noarch        1:3.6.7-1
> ovirt-3.6                        10 k

Explained above

>  ovirt-setup-lib          noarch        1.0.2-1.el7.centos
> ovirt-4.0                        18 k

OK too. Actually in reality you might have a few more such cases -
of packages you installed from 3.6, that 4.0 did not require to update,
but an update is available - so you should, but that's not strictly
neccessary - just like any other package for which an update is available -
E.g. ovirt-vmconsole etc.

>  python-websockify        noarch        0.8.0-1.el7
> centos-ovirt40-candidate         68 k

This is an update from the centos virt sig repo. Again, like any other
package, better update - but up to you. ovirt-engine-websocket-proxy requires
at least 0.6.0, so should probably work even without updating it.

Best,
-- 
Didi


More information about the Users mailing list