[ovirt-users] oVirt 4 Hosted Engine deploy on fc storage - [ ERROR ] Failed to execute stage 'Misc configuration': [Errno 101] Network is unreachable
Simone Tiraboschi
stirabos at redhat.com
Mon Jul 25 09:02:07 EDT 2016
On Mon, Jul 25, 2016 at 2:38 PM, <aleksey.maksimov at it-kb.ru> wrote:
> telnet kom-ad01-vm31.holding.com 54321 = success connection
>
> telnet ::1 54321
> Trying ::1...
> telnet: connect to address ::1: Network is unreachable
>
> (ipv6 on my server disabled)
Ok, so the issue seams here: now by default vdsm binds on :: and its
heuristc can end up using ipv6.
See this one: https://bugzilla.redhat.com/show_bug.cgi?id=1350883
Can you please try enabling ipv6 on your host or setting
management_ip = 0.0.0.0
under the [address] section in /etc/vdsm/vdsm.conf
and then restarting vdsm.
> 25.07.2016, 15:35, "Simone Tiraboschi" <stirabos at redhat.com>:
>> On Mon, Jul 25, 2016 at 2:15 PM, <aleksey.maksimov at it-kb.ru> wrote:
>>> # ss -plutn
>>>
>>> Netid State Recv-Q Send-Q Local Address:Port Peer Address:Port
>>>
>>> udp UNCONN 0 0 *:111 *:* users:(("rpcbind",pid=827,fd=6))
>>> udp UNCONN 0 0 *:161 *:* users:(("snmpd",pid=1609,fd=6))
>>> udp UNCONN 0 0 127.0.0.1:323 *:* users:(("chronyd",pid=795,fd=1))
>>> udp UNCONN 0 0 *:959 *:* users:(("rpcbind",pid=827,fd=7))
>>> udp UNCONN 0 0 127.0.0.1:25375 *:* users:(("snmpd",pid=1609,fd=8))
>>> udp UNCONN 0 0 127.0.0.1:25376 *:* users:(("cmapeerd",pid=2056,fd=5))
>>> udp UNCONN 0 0 127.0.0.1:25393 *:* users:(("cmanicd",pid=2278,fd=3))
>>> udp UNCONN 0 0 :::111 :::* users:(("rpcbind",pid=827,fd=9))
>>> udp UNCONN 0 0 :::959 :::* users:(("rpcbind",pid=827,fd=10))
>>> tcp LISTEN 0 128 *:2381 *:* users:(("hpsmhd",pid=3903,fd=4),("hpsmhd",pid=3901,fd=4),("hpsmhd",pid=3900,fd=4),("hpsmhd",pid=3899,fd=4),("hpsmhd",pid=3898,fd=4),("hpsmhd",pid=3893,fd=4))
>>> tcp LISTEN 0 128 *:111 *:* users:(("rpcbind",pid=827,fd=8))
>>> tcp LISTEN 0 5 *:54322 *:* users:(("ovirt-imageio-d",pid=753,fd=3))
>>> tcp LISTEN 0 128 *:22 *:* users:(("sshd",pid=1606,fd=3))
>>> tcp LISTEN 0 100 127.0.0.1:25 *:* users:(("master",pid=1948,fd=13))
>>> tcp LISTEN 0 128 *:2301 *:* users:(("hpsmhd",pid=3903,fd=3),("hpsmhd",pid=3901,fd=3),("hpsmhd",pid=3900,fd=3),("hpsmhd",pid=3899,fd=3),("hpsmhd",pid=3898,fd=3),("hpsmhd",pid=3893,fd=3))
>>> tcp LISTEN 0 30 *:16514 *:* users:(("libvirtd",pid=10688,fd=13))
>>> tcp LISTEN 0 128 127.0.0.1:199 *:* users:(("snmpd",pid=1609,fd=9))
>>> tcp LISTEN 0 128 :::111 :::* users:(("rpcbind",pid=827,fd=11))
>>> tcp LISTEN 0 5 :::54321 :::* users:(("vdsm",pid=11077,fd=23))
>>
>> vdsm is properly bind over ipv6.
>>
>> Can you please check if you can connect to vdsm with:
>> telnet kom-ad01-vm31.holding.com 54321
>> and with
>> telnet ::1 54321
>> ?
>>
>>> tcp LISTEN 0 30 :::16514 :::* users:(("libvirtd",pid=10688,fd=14))
>>>
>>> 25.07.2016, 15:11, "Simone Tiraboschi" <stirabos at redhat.com>:
>>>> On Mon, Jul 25, 2016 at 2:03 PM, <aleksey.maksimov at it-kb.ru> wrote:
>>>>> Yes.
>>>>>
>>>>> # ping $(python -c 'import socket; print(socket.gethostname())')
>>>>>
>>>>> PING KOM-AD01-VM31.holding.com (10.1.0.231) 56(84) bytes of data.
>>>>> 64 bytes from kom-ad01-vm31.holding.com (10.1.0.231): icmp_seq=1 ttl=64 time=0.030 ms
>>>>> 64 bytes from kom-ad01-vm31.holding.com (10.1.0.231): icmp_seq=2 ttl=64 time=0.015 ms
>>>>> 64 bytes from kom-ad01-vm31.holding.com (10.1.0.231): icmp_seq=3 ttl=64 time=0.011 ms
>>>>> ^C
>>>>> --- KOM-AD01-VM31.holding.com ping statistics ---
>>>>> 3 packets transmitted, 3 received, 0% packet loss, time 2001ms
>>>>> rtt min/avg/max/mdev = 0.011/0.018/0.030/0.009 ms
>>>>>
>>>>> but...
>>>>
>>>> and the output of
>>>> ss -plutn
>>>>
>>>>> # vdsClient -s 0 getVdsCaps
>>>>>
>>>>> Traceback (most recent call last):
>>>>> File "/usr/share/vdsm/vdsClient.py", line 2980, in <module>
>>>>> code, message = commands[command][0](commandArgs)
>>>>> File "/usr/share/vdsm/vdsClient.py", line 543, in do_getCap
>>>>> return self.ExecAndExit(self.s.getVdsCapabilities())
>>>>> File "/usr/lib64/python2.7/xmlrpclib.py", line 1233, in __call__
>>>>> return self.__send(self.__name, args)
>>>>> File "/usr/lib64/python2.7/xmlrpclib.py", line 1587, in __request
>>>>> verbose=self.__verbose
>>>>> File "/usr/lib64/python2.7/xmlrpclib.py", line 1273, in request
>>>>> return self.single_request(host, handler, request_body, verbose)
>>>>> File "/usr/lib64/python2.7/xmlrpclib.py", line 1301, in single_request
>>>>> self.send_content(h, request_body)
>>>>> File "/usr/lib64/python2.7/xmlrpclib.py", line 1448, in send_content
>>>>> connection.endheaders(request_body)
>>>>> File "/usr/lib64/python2.7/httplib.py", line 975, in endheaders
>>>>> self._send_output(message_body)
>>>>> File "/usr/lib64/python2.7/httplib.py", line 835, in _send_output
>>>>> self.send(msg)
>>>>> File "/usr/lib64/python2.7/httplib.py", line 797, in send
>>>>> self.connect()
>>>>> File "/usr/lib/python2.7/site-packages/vdsm/m2cutils.py", line 203, in connect
>>>>> sock = socket.create_connection((self.host, self.port), self.timeout)
>>>>> File "/usr/lib64/python2.7/socket.py", line 571, in create_connection
>>>>> raise err
>>>>> error: [Errno 101] Network is unreachable
>>>>>
>>>>> 25.07.2016, 14:58, "aleksey.maksimov at it-kb.ru" <aleksey.maksimov at it-kb.ru>:
>>>>>> Ok.
>>>>>>
>>>>>> 1) I stopped and disabled the service NetworkManager
>>>>>> # systemctl stop NetworkManager
>>>>>> # systemctl disable NetworkManager
>>>>>>
>>>>>> 2) I filled /etc/resolv.conf and remove DNS1,DNS2 and add PEERDNS=no in ifcfg-* file.
>>>>>>
>>>>>> 3) Reboot server
>>>>>>
>>>>>> 4) Try deploy oVirt HE 4 and I get the same error
>>>>>>
>>>>>> [ INFO ] Creating Volume Group
>>>>>> [ INFO ] Creating Storage Domain
>>>>>> [ INFO ] Creating Storage Pool
>>>>>> [ INFO ] Connecting Storage Pool
>>>>>> [ INFO ] Verifying sanlock lockspace initialization
>>>>>> [ ERROR ] Failed to execute stage 'Misc configuration': [Errno 101] Network is unreachable
>>>>>> [ INFO ] Stage: Clean up
>>>>>> [ INFO ] Generating answer file '/var/lib/ovirt-hosted-engine-setup/answers/answers-20160725143420.conf'
>>>>>> [ INFO ] Stage: Pre-termination
>>>>>> [ INFO ] Stage: Termination
>>>>>> [ ERROR ] Hosted Engine deployment failed: this system is not reliable, please check the issue, fix and redeploy
>>>>>> Log file is located at /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20160725142534-t81kwf.log
>>>>>>
>>>>>> What ideas further?
>>>>>>
>>>>>> 25.07.2016, 13:06, "Simone Tiraboschi" <stirabos at redhat.com>:
>>>>>>> On Mon, Jul 25, 2016 at 11:54 AM, <aleksey.maksimov at it-kb.ru> wrote:
>>>>>>>> What am I supposed to do for successfully deploy ovirt 4 ?
>>>>>>>> Any ideas ?
>>>>>>>
>>>>>>> Can you please try to explicitly configure your DNS with nameserver
>>>>>>> under /etc/resolv.conf and remove DNS1 and DNS2 and set PEERDNS=no for
>>>>>>> the interface you are going to use?
>>>>>>>
>>>>>>>> 25.07.2016, 12:47, "aleksey.maksimov at it-kb.ru" <aleksey.maksimov at it-kb.ru>:
>>>>>>>>> "Aleksey, was your DNS configured with DNS1 and DNS2 just on the interface you used to create the management bridge on?"
>>>>>>>>>
>>>>>>>>> Yes. Of course
>>>>>>>>>
>>>>>>>>> 25.07.2016, 12:27, "Simone Tiraboschi" <stirabos at redhat.com>:
>>>>>>>>>> On Mon, Jul 25, 2016 at 10:56 AM, Piotr Kliczewski
>>>>>>>>>> <piotr.kliczewski at gmail.com> wrote:
>>>>>>>>>>> This could be the issue here as well as for BZ #1358530
>>>>>>>>>>>
>>>>>>>>>>> On Mon, Jul 25, 2016 at 10:53 AM, <aleksey.maksimov at it-kb.ru> wrote:
>>>>>>>>>>>> Could this be due to the fact that the ovirt installer has changed network configuration files (ifcfg-*, resolv.conf) ?
>>>>>>>>>>>> After the error in ovirt installation process I see from resolv.conf disappeared on my DNS servers entry and now the server is unable to resolve names.
>>>>>>>>>>
>>>>>>>>>> So it could be related to https://bugzilla.redhat.com/show_bug.cgi?id=1160423
>>>>>>>>>>
>>>>>>>>>> Aleksey, was your DNS configured with DNS1 and DNS2 just on the
>>>>>>>>>> interface you used to create the management bridge on?
>>>>>>>>>> Can you please try the workaround described here
>>>>>>>>>> https://bugzilla.redhat.com/show_bug.cgi?id=1160423#c25 ?
>>>>>>>>>>
>>>>>>>>>>>> 25.07.2016, 11:26, "Simone Tiraboschi" <stirabos at redhat.com>:
>>>>>>>>>>>>> On Mon, Jul 25, 2016 at 10:22 AM, <aleksey.maksimov at it-kb.ru> wrote:
>>>>>>>>>>>>>> # vdsClient -s 0 getVdsCaps
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Traceback (most recent call last):
>>>>>>>>>>>>>> File "/usr/share/vdsm/vdsClient.py", line 2980, in <module>
>>>>>>>>>>>>>> code, message = commands[command][0](commandArgs)
>>>>>>>>>>>>>> File "/usr/share/vdsm/vdsClient.py", line 543, in do_getCap
>>>>>>>>>>>>>> return self.ExecAndExit(self.s.getVdsCapabilities())
>>>>>>>>>>>>>> File "/usr/lib64/python2.7/xmlrpclib.py", line 1233, in __call__
>>>>>>>>>>>>>> return self.__send(self.__name, args)
>>>>>>>>>>>>>> File "/usr/lib64/python2.7/xmlrpclib.py", line 1587, in __request
>>>>>>>>>>>>>> verbose=self.__verbose
>>>>>>>>>>>>>> File "/usr/lib64/python2.7/xmlrpclib.py", line 1273, in request
>>>>>>>>>>>>>> return self.single_request(host, handler, request_body, verbose)
>>>>>>>>>>>>>> File "/usr/lib64/python2.7/xmlrpclib.py", line 1301, in single_request
>>>>>>>>>>>>>> self.send_content(h, request_body)
>>>>>>>>>>>>>> File "/usr/lib64/python2.7/xmlrpclib.py", line 1448, in send_content
>>>>>>>>>>>>>> connection.endheaders(request_body)
>>>>>>>>>>>>>> File "/usr/lib64/python2.7/httplib.py", line 975, in endheaders
>>>>>>>>>>>>>> self._send_output(message_body)
>>>>>>>>>>>>>> File "/usr/lib64/python2.7/httplib.py", line 835, in _send_output
>>>>>>>>>>>>>> self.send(msg)
>>>>>>>>>>>>>> File "/usr/lib64/python2.7/httplib.py", line 797, in send
>>>>>>>>>>>>>> self.connect()
>>>>>>>>>>>>>> File "/usr/lib/python2.7/site-packages/vdsm/m2cutils.py", line 203, in connect
>>>>>>>>>>>>>> sock = socket.create_connection((self.host, self.port), self.timeout)
>>>>>>>>>>>>>> File "/usr/lib64/python2.7/socket.py", line 571, in create_connection
>>>>>>>>>>>>>> raise err
>>>>>>>>>>>>>> error: [Errno 101] Network is unreachable
>>>>>>>>>>>>>
>>>>>>>>>>>>> Yaniv, can you please take also a look to this one?
>>>>>>>>>>>>> it's exactly the opposite of https://bugzilla.redhat.com/1358530
>>>>>>>>>>>>> Here the jsonrpcclient works but not the xmlrpc one.
>>>>>>>>>>>>>
>>>>>>>>>>>>>> 25.07.2016, 11:17, "Simone Tiraboschi" <stirabos at redhat.com>:
>>>>>>>>>>>>>>> On Mon, Jul 25, 2016 at 7:51 AM, <aleksey.maksimov at it-kb.ru> wrote:
>>>>>>>>>>>>>>>> Simone, there is something interesting in the vdsm.log?
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> For what I saw the issue is not related to the storage but to the network.
>>>>>>>>>>>>>>> ovirt-hosted-engine-setup uses the jsonrpc client, instead the code
>>>>>>>>>>>>>>> from ovirt-hosted-engine-ha still uses the xmlrpc client somewhere and
>>>>>>>>>>>>>>> this happens also when the setup asks to create the lockspace volume.
>>>>>>>>>>>>>>> It seams that in your case the xmlrpc client could not connect vdsm on
>>>>>>>>>>>>>>> the localhost.
>>>>>>>>>>>>>>> It could be somehow related to:
>>>>>>>>>>>>>>> https://bugzilla.redhat.com/1358530
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Can you please try executing
>>>>>>>>>>>>>>> sudo vdsClient -s 0 getVdsCaps
>>>>>>>>>>>>>>> on that host?
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> 22.07.2016, 19:36, "aleksey.maksimov at it-kb.ru" <aleksey.maksimov at it-kb.ru>:
>>>>>>>>>>>>>>>>> Simone, thanks for link.
>>>>>>>>>>>>>>>>> vdsm.log attached
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> 22.07.2016, 19:28, "Simone Tiraboschi" <stirabos at redhat.com>:
>>>>>>>>>>>>>>>>>> On Fri, Jul 22, 2016 at 5:59 PM, <aleksey.maksimov at it-kb.ru> wrote:
>>>>>>>>>>>>>>>>>>> Thank you for your response, Simone.
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> Log attached.
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> It seams it comes from VDSM, can you please attach also vdsm.log?
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> I don't use ovirt-engine-appliance because I have not found "how-to" for ovirt-engine-appliance deployment in hosted engine configuration.
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> yum install ovirt-engine-appliance
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Then follow the instruction here:
>>>>>>>>>>>>>>>>>> http://www.ovirt.org/develop/release-management/features/heapplianceflow/
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> 22.07.2016, 17:09, "Simone Tiraboschi" <stirabos at redhat.com>:
>>>>>>>>>>>>>>>>>>>> Hi Aleksey,
>>>>>>>>>>>>>>>>>>>> Can you please attach hosted-engine-setup logs?
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> On Fri, Jul 22, 2016 at 3:46 PM, <aleksey.maksimov at it-kb.ru> wrote:
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> Hello oVirt guru`s !
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> I have problem with initial deploy of ovirt 4.0 hosted engine.
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> My environment :
>>>>>>>>>>>>>>>>>>>>> ============================
>>>>>>>>>>>>>>>>>>>>> * Two servers HP ProLiant DL 360 G5 with Qlogic FC HBA connected (with
>>>>>>>>>>>>>>>>>>>>> multipathd) to storage HP 3PAR 7200
>>>>>>>>>>>>>>>>>>>>> * On each server installed CentOS 7.2 Linux (3.10.0-327.22.2.el7.x86_64)
>>>>>>>>>>>>>>>>>>>>> * On 3PAR storage I created 2 LUNs for oVirt.
>>>>>>>>>>>>>>>>>>>>> - First LUN for oVirt Hosted Engine VM (60GB)
>>>>>>>>>>>>>>>>>>>>> - Second LUN for all other VMs (2TB)
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> # multipath -ll
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> 3par-vv1 (360002ac0000000000000001b0000cec9) dm-0 3PARdata,VV
>>>>>>>>>>>>>>>>>>>>> size=60G features='1 queue_if_no_path' hwhandler='1 alua' wp=rw
>>>>>>>>>>>>>>>>>>>>> `-+- policy='round-robin 0' prio=50 status=active
>>>>>>>>>>>>>>>>>>>>> |- 2:0:1:1 sdd 8:48 active ready running
>>>>>>>>>>>>>>>>>>>>> |- 3:0:0:1 sdf 8:80 active ready running
>>>>>>>>>>>>>>>>>>>>> |- 2:0:0:1 sdb 8:16 active ready running
>>>>>>>>>>>>>>>>>>>>> `- 3:0:1:1 sdh 8:112 active ready running
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> 3par-vv2 (360002ac000000000000000160000cec9) dm-1 3PARdata,VV
>>>>>>>>>>>>>>>>>>>>> size=2.0T features='1 queue_if_no_path' hwhandler='1 alua' wp=rw
>>>>>>>>>>>>>>>>>>>>> `-+- policy='round-robin 0' prio=50 status=active
>>>>>>>>>>>>>>>>>>>>> |- 2:0:0:0 sda 8:0 active ready running
>>>>>>>>>>>>>>>>>>>>> |- 3:0:0:0 sde 8:64 active ready running
>>>>>>>>>>>>>>>>>>>>> |- 2:0:1:0 sdc 8:32 active ready running
>>>>>>>>>>>>>>>>>>>>> `- 3:0:1:0 sdg 8:96 active ready running
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> My steps on first server (initial deploy of ovirt 4.0 hosted engine):
>>>>>>>>>>>>>>>>>>>>> ============================
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> # systemctl stop NetworkManager
>>>>>>>>>>>>>>>>>>>>> # systemctl disable NetworkManager
>>>>>>>>>>>>>>>>>>>>> # yum -y install http://resources.ovirt.org/pub/yum-repo/ovirt-release40.rpm
>>>>>>>>>>>>>>>>>>>>> # yum -y install epel-release
>>>>>>>>>>>>>>>>>>>>> # wget
>>>>>>>>>>>>>>>>>>>>> http://mirror.yandex.ru/centos/7/isos/x86_64/CentOS-7-x86_64-NetInstall-1511.iso
>>>>>>>>>>>>>>>>>>>>> -P /tmp/
>>>>>>>>>>>>>>>>>>>>> # yum install ovirt-hosted-engine-setup
>>>>>>>>>>>>>>>>>>>>> # yum install screen
>>>>>>>>>>>>>>>>>>>>> # screen -RD
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> ...in screen session :
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> # hosted-engine --deploy
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> ...
>>>>>>>>>>>>>>>>>>>>> in configuration process I chose "fc" as storage type for oVirt hosted
>>>>>>>>>>>>>>>>>>>>> engine vm and select 60GB LUN...
>>>>>>>>>>>>>>>>>>>>> ...
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> --== CONFIGURATION PREVIEW ==--
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> ...
>>>>>>>>>>>>>>>>>>>>> Firewall manager : iptables
>>>>>>>>>>>>>>>>>>>>> Gateway address : 10.1.0.1
>>>>>>>>>>>>>>>>>>>>> Host name for web application : KOM-AD01-OVIRT1
>>>>>>>>>>>>>>>>>>>>> Storage Domain type : fc
>>>>>>>>>>>>>>>>>>>>> Host ID : 1
>>>>>>>>>>>>>>>>>>>>> LUN ID :
>>>>>>>>>>>>>>>>>>>>> 360002ac0000000000000001b0000cec9
>>>>>>>>>>>>>>>>>>>>> Image size GB : 40
>>>>>>>>>>>>>>>>>>>>> Console type : vnc
>>>>>>>>>>>>>>>>>>>>> Memory size MB : 4096
>>>>>>>>>>>>>>>>>>>>> MAC address : 00:16:3e:77:1d:07
>>>>>>>>>>>>>>>>>>>>> Boot type : cdrom
>>>>>>>>>>>>>>>>>>>>> Number of CPUs : 2
>>>>>>>>>>>>>>>>>>>>> ISO image (cdrom boot/cloud-init) :
>>>>>>>>>>>>>>>>>>>>> /tmp/CentOS-7-x86_64-NetInstall-1511.iso
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Can I ask why you prefer/need to manually create a VM installing from
>>>>>>>>>>>>>>>>>>>> a CD instead of using the ready-to-use ovirt-engine-appliance?
>>>>>>>>>>>>>>>>>>>> Using the appliance makes the setup process a lot shorted and more comfortable.
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> CPU Type : model_Penryn
>>>>>>>>>>>>>>>>>>>>> ...
>>>>>>>>>>>>>>>>>>>>> and get error after step "Verifying sanlock lockspace initialization"
>>>>>>>>>>>>>>>>>>>>> ...
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> [ INFO ] Verifying sanlock lockspace initialization
>>>>>>>>>>>>>>>>>>>>> [ ERROR ] Failed to execute stage 'Misc configuration': [Errno 101] Network
>>>>>>>>>>>>>>>>>>>>> is unreachable
>>>>>>>>>>>>>>>>>>>>> [ INFO ] Stage: Clean up
>>>>>>>>>>>>>>>>>>>>> [ INFO ] Generating answer file
>>>>>>>>>>>>>>>>>>>>> '/var/lib/ovirt-hosted-engine-setup/answers/answers-20160722124133.conf'
>>>>>>>>>>>>>>>>>>>>> [ INFO ] Stage: Pre-termination
>>>>>>>>>>>>>>>>>>>>> [ INFO ] Stage: Termination
>>>>>>>>>>>>>>>>>>>>> [ ERROR ] Hosted Engine deployment failed: this system is not reliable,
>>>>>>>>>>>>>>>>>>>>> please check the issue, fix and redeploy
>>>>>>>>>>>>>>>>>>>>> Log file is located at
>>>>>>>>>>>>>>>>>>>>> /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20160722123404-t26vw0.log
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> Interestingly
>>>>>>>>>>>>>>>>>>>>> ============================
>>>>>>>>>>>>>>>>>>>>> If I try to deploy hosted-engine v3.6, everything goes well in the same
>>>>>>>>>>>>>>>>>>>>> configuration !! :
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> ....
>>>>>>>>>>>>>>>>>>>>> [ INFO ] Stage: Transaction setup
>>>>>>>>>>>>>>>>>>>>> [ INFO ] Stage: Misc configuration
>>>>>>>>>>>>>>>>>>>>> [ INFO ] Stage: Package installation
>>>>>>>>>>>>>>>>>>>>> [ INFO ] Stage: Misc configuration
>>>>>>>>>>>>>>>>>>>>> [ INFO ] Configuring libvirt
>>>>>>>>>>>>>>>>>>>>> [ INFO ] Configuring VDSM
>>>>>>>>>>>>>>>>>>>>> [ INFO ] Starting vdsmd
>>>>>>>>>>>>>>>>>>>>> [ INFO ] Waiting for VDSM hardware info
>>>>>>>>>>>>>>>>>>>>> [ INFO ] Configuring the management bridge
>>>>>>>>>>>>>>>>>>>>> [ INFO ] Creating Volume Group
>>>>>>>>>>>>>>>>>>>>> [ INFO ] Creating Storage Domain
>>>>>>>>>>>>>>>>>>>>> [ INFO ] Creating Storage Pool
>>>>>>>>>>>>>>>>>>>>> [ INFO ] Connecting Storage Pool
>>>>>>>>>>>>>>>>>>>>> [ INFO ] Verifying sanlock lockspace initialization
>>>>>>>>>>>>>>>>>>>>> [ INFO ] Creating Image for 'hosted-engine.lockspace' ...
>>>>>>>>>>>>>>>>>>>>> [ INFO ] Image for 'hosted-engine.lockspace' created successfully
>>>>>>>>>>>>>>>>>>>>> [ INFO ] Creating Image for 'hosted-engine.metadata' ...
>>>>>>>>>>>>>>>>>>>>> [ INFO ] Image for 'hosted-engine.metadata' created successfully
>>>>>>>>>>>>>>>>>>>>> [ INFO ] Creating VM Image
>>>>>>>>>>>>>>>>>>>>> [ INFO ] Destroying Storage Pool
>>>>>>>>>>>>>>>>>>>>> [ INFO ] Start monitoring domain
>>>>>>>>>>>>>>>>>>>>> [ INFO ] Configuring VM
>>>>>>>>>>>>>>>>>>>>> [ INFO ] Updating hosted-engine configuration
>>>>>>>>>>>>>>>>>>>>> [ INFO ] Stage: Transaction commit
>>>>>>>>>>>>>>>>>>>>> [ INFO ] Stage: Closing up
>>>>>>>>>>>>>>>>>>>>> [ INFO ] Creating VM
>>>>>>>>>>>>>>>>>>>>> You can now connect to the VM with the following command:
>>>>>>>>>>>>>>>>>>>>> /bin/remote-viewer vnc://localhost:5900
>>>>>>>>>>>>>>>>>>>>> ...
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> What could be the problem?
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>>>>>>> Users mailing list
>>>>>>>>>>>>>>>>>>>>> Users at ovirt.org
>>>>>>>>>>>>>>>>>>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>> Users mailing list
>>>>>>>>>>>> Users at ovirt.org
>>>>>>>>>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>>>>>>>
>>>>>>>>> _______________________________________________
>>>>>>>>> Users mailing list
>>>>>>>>> Users at ovirt.org
>>>>>>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>>>>
>>>>>> _______________________________________________
>>>>>> Users mailing list
>>>>>> Users at ovirt.org
>>>>>> http://lists.ovirt.org/mailman/listinfo/users
More information about the Users
mailing list