[ovirt-users] oVirt 4 Hosted Engine deploy on fc storage - [ ERROR ] Failed to execute stage 'Misc configuration': [Errno 101] Network is unreachable
aleksey.maksimov at it-kb.ru
aleksey.maksimov at it-kb.ru
Mon Jul 25 12:03:05 UTC 2016
Yes.
# ping $(python -c 'import socket; print(socket.gethostname())')
PING KOM-AD01-VM31.holding.com (10.1.0.231) 56(84) bytes of data.
64 bytes from kom-ad01-vm31.holding.com (10.1.0.231): icmp_seq=1 ttl=64 time=0.030 ms
64 bytes from kom-ad01-vm31.holding.com (10.1.0.231): icmp_seq=2 ttl=64 time=0.015 ms
64 bytes from kom-ad01-vm31.holding.com (10.1.0.231): icmp_seq=3 ttl=64 time=0.011 ms
^C
--- KOM-AD01-VM31.holding.com ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2001ms
rtt min/avg/max/mdev = 0.011/0.018/0.030/0.009 ms
but...
# vdsClient -s 0 getVdsCaps
Traceback (most recent call last):
File "/usr/share/vdsm/vdsClient.py", line 2980, in <module>
code, message = commands[command][0](commandArgs)
File "/usr/share/vdsm/vdsClient.py", line 543, in do_getCap
return self.ExecAndExit(self.s.getVdsCapabilities())
File "/usr/lib64/python2.7/xmlrpclib.py", line 1233, in __call__
return self.__send(self.__name, args)
File "/usr/lib64/python2.7/xmlrpclib.py", line 1587, in __request
verbose=self.__verbose
File "/usr/lib64/python2.7/xmlrpclib.py", line 1273, in request
return self.single_request(host, handler, request_body, verbose)
File "/usr/lib64/python2.7/xmlrpclib.py", line 1301, in single_request
self.send_content(h, request_body)
File "/usr/lib64/python2.7/xmlrpclib.py", line 1448, in send_content
connection.endheaders(request_body)
File "/usr/lib64/python2.7/httplib.py", line 975, in endheaders
self._send_output(message_body)
File "/usr/lib64/python2.7/httplib.py", line 835, in _send_output
self.send(msg)
File "/usr/lib64/python2.7/httplib.py", line 797, in send
self.connect()
File "/usr/lib/python2.7/site-packages/vdsm/m2cutils.py", line 203, in connect
sock = socket.create_connection((self.host, self.port), self.timeout)
File "/usr/lib64/python2.7/socket.py", line 571, in create_connection
raise err
error: [Errno 101] Network is unreachable
25.07.2016, 14:58, "aleksey.maksimov at it-kb.ru" <aleksey.maksimov at it-kb.ru>:
> Ok.
>
> 1) I stopped and disabled the service NetworkManager
> # systemctl stop NetworkManager
> # systemctl disable NetworkManager
>
> 2) I filled /etc/resolv.conf and remove DNS1,DNS2 and add PEERDNS=no in ifcfg-* file.
>
> 3) Reboot server
>
> 4) Try deploy oVirt HE 4 and I get the same error
>
> [ INFO ] Creating Volume Group
> [ INFO ] Creating Storage Domain
> [ INFO ] Creating Storage Pool
> [ INFO ] Connecting Storage Pool
> [ INFO ] Verifying sanlock lockspace initialization
> [ ERROR ] Failed to execute stage 'Misc configuration': [Errno 101] Network is unreachable
> [ INFO ] Stage: Clean up
> [ INFO ] Generating answer file '/var/lib/ovirt-hosted-engine-setup/answers/answers-20160725143420.conf'
> [ INFO ] Stage: Pre-termination
> [ INFO ] Stage: Termination
> [ ERROR ] Hosted Engine deployment failed: this system is not reliable, please check the issue, fix and redeploy
> Log file is located at /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20160725142534-t81kwf.log
>
> What ideas further?
>
> 25.07.2016, 13:06, "Simone Tiraboschi" <stirabos at redhat.com>:
>> On Mon, Jul 25, 2016 at 11:54 AM, <aleksey.maksimov at it-kb.ru> wrote:
>>> What am I supposed to do for successfully deploy ovirt 4 ?
>>> Any ideas ?
>>
>> Can you please try to explicitly configure your DNS with nameserver
>> under /etc/resolv.conf and remove DNS1 and DNS2 and set PEERDNS=no for
>> the interface you are going to use?
>>
>>> 25.07.2016, 12:47, "aleksey.maksimov at it-kb.ru" <aleksey.maksimov at it-kb.ru>:
>>>> "Aleksey, was your DNS configured with DNS1 and DNS2 just on the interface you used to create the management bridge on?"
>>>>
>>>> Yes. Of course
>>>>
>>>> 25.07.2016, 12:27, "Simone Tiraboschi" <stirabos at redhat.com>:
>>>>> On Mon, Jul 25, 2016 at 10:56 AM, Piotr Kliczewski
>>>>> <piotr.kliczewski at gmail.com> wrote:
>>>>>> This could be the issue here as well as for BZ #1358530
>>>>>>
>>>>>> On Mon, Jul 25, 2016 at 10:53 AM, <aleksey.maksimov at it-kb.ru> wrote:
>>>>>>> Could this be due to the fact that the ovirt installer has changed network configuration files (ifcfg-*, resolv.conf) ?
>>>>>>> After the error in ovirt installation process I see from resolv.conf disappeared on my DNS servers entry and now the server is unable to resolve names.
>>>>>
>>>>> So it could be related to https://bugzilla.redhat.com/show_bug.cgi?id=1160423
>>>>>
>>>>> Aleksey, was your DNS configured with DNS1 and DNS2 just on the
>>>>> interface you used to create the management bridge on?
>>>>> Can you please try the workaround described here
>>>>> https://bugzilla.redhat.com/show_bug.cgi?id=1160423#c25 ?
>>>>>
>>>>>>> 25.07.2016, 11:26, "Simone Tiraboschi" <stirabos at redhat.com>:
>>>>>>>> On Mon, Jul 25, 2016 at 10:22 AM, <aleksey.maksimov at it-kb.ru> wrote:
>>>>>>>>> # vdsClient -s 0 getVdsCaps
>>>>>>>>>
>>>>>>>>> Traceback (most recent call last):
>>>>>>>>> File "/usr/share/vdsm/vdsClient.py", line 2980, in <module>
>>>>>>>>> code, message = commands[command][0](commandArgs)
>>>>>>>>> File "/usr/share/vdsm/vdsClient.py", line 543, in do_getCap
>>>>>>>>> return self.ExecAndExit(self.s.getVdsCapabilities())
>>>>>>>>> File "/usr/lib64/python2.7/xmlrpclib.py", line 1233, in __call__
>>>>>>>>> return self.__send(self.__name, args)
>>>>>>>>> File "/usr/lib64/python2.7/xmlrpclib.py", line 1587, in __request
>>>>>>>>> verbose=self.__verbose
>>>>>>>>> File "/usr/lib64/python2.7/xmlrpclib.py", line 1273, in request
>>>>>>>>> return self.single_request(host, handler, request_body, verbose)
>>>>>>>>> File "/usr/lib64/python2.7/xmlrpclib.py", line 1301, in single_request
>>>>>>>>> self.send_content(h, request_body)
>>>>>>>>> File "/usr/lib64/python2.7/xmlrpclib.py", line 1448, in send_content
>>>>>>>>> connection.endheaders(request_body)
>>>>>>>>> File "/usr/lib64/python2.7/httplib.py", line 975, in endheaders
>>>>>>>>> self._send_output(message_body)
>>>>>>>>> File "/usr/lib64/python2.7/httplib.py", line 835, in _send_output
>>>>>>>>> self.send(msg)
>>>>>>>>> File "/usr/lib64/python2.7/httplib.py", line 797, in send
>>>>>>>>> self.connect()
>>>>>>>>> File "/usr/lib/python2.7/site-packages/vdsm/m2cutils.py", line 203, in connect
>>>>>>>>> sock = socket.create_connection((self.host, self.port), self.timeout)
>>>>>>>>> File "/usr/lib64/python2.7/socket.py", line 571, in create_connection
>>>>>>>>> raise err
>>>>>>>>> error: [Errno 101] Network is unreachable
>>>>>>>>
>>>>>>>> Yaniv, can you please take also a look to this one?
>>>>>>>> it's exactly the opposite of https://bugzilla.redhat.com/1358530
>>>>>>>> Here the jsonrpcclient works but not the xmlrpc one.
>>>>>>>>
>>>>>>>>> 25.07.2016, 11:17, "Simone Tiraboschi" <stirabos at redhat.com>:
>>>>>>>>>> On Mon, Jul 25, 2016 at 7:51 AM, <aleksey.maksimov at it-kb.ru> wrote:
>>>>>>>>>>> Simone, there is something interesting in the vdsm.log?
>>>>>>>>>>
>>>>>>>>>> For what I saw the issue is not related to the storage but to the network.
>>>>>>>>>> ovirt-hosted-engine-setup uses the jsonrpc client, instead the code
>>>>>>>>>> from ovirt-hosted-engine-ha still uses the xmlrpc client somewhere and
>>>>>>>>>> this happens also when the setup asks to create the lockspace volume.
>>>>>>>>>> It seams that in your case the xmlrpc client could not connect vdsm on
>>>>>>>>>> the localhost.
>>>>>>>>>> It could be somehow related to:
>>>>>>>>>> https://bugzilla.redhat.com/1358530
>>>>>>>>>>
>>>>>>>>>> Can you please try executing
>>>>>>>>>> sudo vdsClient -s 0 getVdsCaps
>>>>>>>>>> on that host?
>>>>>>>>>>
>>>>>>>>>>> 22.07.2016, 19:36, "aleksey.maksimov at it-kb.ru" <aleksey.maksimov at it-kb.ru>:
>>>>>>>>>>>> Simone, thanks for link.
>>>>>>>>>>>> vdsm.log attached
>>>>>>>>>>>>
>>>>>>>>>>>> 22.07.2016, 19:28, "Simone Tiraboschi" <stirabos at redhat.com>:
>>>>>>>>>>>>> On Fri, Jul 22, 2016 at 5:59 PM, <aleksey.maksimov at it-kb.ru> wrote:
>>>>>>>>>>>>>> Thank you for your response, Simone.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Log attached.
>>>>>>>>>>>>>
>>>>>>>>>>>>> It seams it comes from VDSM, can you please attach also vdsm.log?
>>>>>>>>>>>>>
>>>>>>>>>>>>>> I don't use ovirt-engine-appliance because I have not found "how-to" for ovirt-engine-appliance deployment in hosted engine configuration.
>>>>>>>>>>>>>
>>>>>>>>>>>>> yum install ovirt-engine-appliance
>>>>>>>>>>>>>
>>>>>>>>>>>>> Then follow the instruction here:
>>>>>>>>>>>>> http://www.ovirt.org/develop/release-management/features/heapplianceflow/
>>>>>>>>>>>>>
>>>>>>>>>>>>>> 22.07.2016, 17:09, "Simone Tiraboschi" <stirabos at redhat.com>:
>>>>>>>>>>>>>>> Hi Aleksey,
>>>>>>>>>>>>>>> Can you please attach hosted-engine-setup logs?
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> On Fri, Jul 22, 2016 at 3:46 PM, <aleksey.maksimov at it-kb.ru> wrote:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Hello oVirt guru`s !
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> I have problem with initial deploy of ovirt 4.0 hosted engine.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> My environment :
>>>>>>>>>>>>>>>> ============================
>>>>>>>>>>>>>>>> * Two servers HP ProLiant DL 360 G5 with Qlogic FC HBA connected (with
>>>>>>>>>>>>>>>> multipathd) to storage HP 3PAR 7200
>>>>>>>>>>>>>>>> * On each server installed CentOS 7.2 Linux (3.10.0-327.22.2.el7.x86_64)
>>>>>>>>>>>>>>>> * On 3PAR storage I created 2 LUNs for oVirt.
>>>>>>>>>>>>>>>> - First LUN for oVirt Hosted Engine VM (60GB)
>>>>>>>>>>>>>>>> - Second LUN for all other VMs (2TB)
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> # multipath -ll
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> 3par-vv1 (360002ac0000000000000001b0000cec9) dm-0 3PARdata,VV
>>>>>>>>>>>>>>>> size=60G features='1 queue_if_no_path' hwhandler='1 alua' wp=rw
>>>>>>>>>>>>>>>> `-+- policy='round-robin 0' prio=50 status=active
>>>>>>>>>>>>>>>> |- 2:0:1:1 sdd 8:48 active ready running
>>>>>>>>>>>>>>>> |- 3:0:0:1 sdf 8:80 active ready running
>>>>>>>>>>>>>>>> |- 2:0:0:1 sdb 8:16 active ready running
>>>>>>>>>>>>>>>> `- 3:0:1:1 sdh 8:112 active ready running
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> 3par-vv2 (360002ac000000000000000160000cec9) dm-1 3PARdata,VV
>>>>>>>>>>>>>>>> size=2.0T features='1 queue_if_no_path' hwhandler='1 alua' wp=rw
>>>>>>>>>>>>>>>> `-+- policy='round-robin 0' prio=50 status=active
>>>>>>>>>>>>>>>> |- 2:0:0:0 sda 8:0 active ready running
>>>>>>>>>>>>>>>> |- 3:0:0:0 sde 8:64 active ready running
>>>>>>>>>>>>>>>> |- 2:0:1:0 sdc 8:32 active ready running
>>>>>>>>>>>>>>>> `- 3:0:1:0 sdg 8:96 active ready running
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> My steps on first server (initial deploy of ovirt 4.0 hosted engine):
>>>>>>>>>>>>>>>> ============================
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> # systemctl stop NetworkManager
>>>>>>>>>>>>>>>> # systemctl disable NetworkManager
>>>>>>>>>>>>>>>> # yum -y install http://resources.ovirt.org/pub/yum-repo/ovirt-release40.rpm
>>>>>>>>>>>>>>>> # yum -y install epel-release
>>>>>>>>>>>>>>>> # wget
>>>>>>>>>>>>>>>> http://mirror.yandex.ru/centos/7/isos/x86_64/CentOS-7-x86_64-NetInstall-1511.iso
>>>>>>>>>>>>>>>> -P /tmp/
>>>>>>>>>>>>>>>> # yum install ovirt-hosted-engine-setup
>>>>>>>>>>>>>>>> # yum install screen
>>>>>>>>>>>>>>>> # screen -RD
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> ...in screen session :
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> # hosted-engine --deploy
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> ...
>>>>>>>>>>>>>>>> in configuration process I chose "fc" as storage type for oVirt hosted
>>>>>>>>>>>>>>>> engine vm and select 60GB LUN...
>>>>>>>>>>>>>>>> ...
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> --== CONFIGURATION PREVIEW ==--
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> ...
>>>>>>>>>>>>>>>> Firewall manager : iptables
>>>>>>>>>>>>>>>> Gateway address : 10.1.0.1
>>>>>>>>>>>>>>>> Host name for web application : KOM-AD01-OVIRT1
>>>>>>>>>>>>>>>> Storage Domain type : fc
>>>>>>>>>>>>>>>> Host ID : 1
>>>>>>>>>>>>>>>> LUN ID :
>>>>>>>>>>>>>>>> 360002ac0000000000000001b0000cec9
>>>>>>>>>>>>>>>> Image size GB : 40
>>>>>>>>>>>>>>>> Console type : vnc
>>>>>>>>>>>>>>>> Memory size MB : 4096
>>>>>>>>>>>>>>>> MAC address : 00:16:3e:77:1d:07
>>>>>>>>>>>>>>>> Boot type : cdrom
>>>>>>>>>>>>>>>> Number of CPUs : 2
>>>>>>>>>>>>>>>> ISO image (cdrom boot/cloud-init) :
>>>>>>>>>>>>>>>> /tmp/CentOS-7-x86_64-NetInstall-1511.iso
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Can I ask why you prefer/need to manually create a VM installing from
>>>>>>>>>>>>>>> a CD instead of using the ready-to-use ovirt-engine-appliance?
>>>>>>>>>>>>>>> Using the appliance makes the setup process a lot shorted and more comfortable.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> CPU Type : model_Penryn
>>>>>>>>>>>>>>>> ...
>>>>>>>>>>>>>>>> and get error after step "Verifying sanlock lockspace initialization"
>>>>>>>>>>>>>>>> ...
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> [ INFO ] Verifying sanlock lockspace initialization
>>>>>>>>>>>>>>>> [ ERROR ] Failed to execute stage 'Misc configuration': [Errno 101] Network
>>>>>>>>>>>>>>>> is unreachable
>>>>>>>>>>>>>>>> [ INFO ] Stage: Clean up
>>>>>>>>>>>>>>>> [ INFO ] Generating answer file
>>>>>>>>>>>>>>>> '/var/lib/ovirt-hosted-engine-setup/answers/answers-20160722124133.conf'
>>>>>>>>>>>>>>>> [ INFO ] Stage: Pre-termination
>>>>>>>>>>>>>>>> [ INFO ] Stage: Termination
>>>>>>>>>>>>>>>> [ ERROR ] Hosted Engine deployment failed: this system is not reliable,
>>>>>>>>>>>>>>>> please check the issue, fix and redeploy
>>>>>>>>>>>>>>>> Log file is located at
>>>>>>>>>>>>>>>> /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20160722123404-t26vw0.log
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Interestingly
>>>>>>>>>>>>>>>> ============================
>>>>>>>>>>>>>>>> If I try to deploy hosted-engine v3.6, everything goes well in the same
>>>>>>>>>>>>>>>> configuration !! :
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> ....
>>>>>>>>>>>>>>>> [ INFO ] Stage: Transaction setup
>>>>>>>>>>>>>>>> [ INFO ] Stage: Misc configuration
>>>>>>>>>>>>>>>> [ INFO ] Stage: Package installation
>>>>>>>>>>>>>>>> [ INFO ] Stage: Misc configuration
>>>>>>>>>>>>>>>> [ INFO ] Configuring libvirt
>>>>>>>>>>>>>>>> [ INFO ] Configuring VDSM
>>>>>>>>>>>>>>>> [ INFO ] Starting vdsmd
>>>>>>>>>>>>>>>> [ INFO ] Waiting for VDSM hardware info
>>>>>>>>>>>>>>>> [ INFO ] Configuring the management bridge
>>>>>>>>>>>>>>>> [ INFO ] Creating Volume Group
>>>>>>>>>>>>>>>> [ INFO ] Creating Storage Domain
>>>>>>>>>>>>>>>> [ INFO ] Creating Storage Pool
>>>>>>>>>>>>>>>> [ INFO ] Connecting Storage Pool
>>>>>>>>>>>>>>>> [ INFO ] Verifying sanlock lockspace initialization
>>>>>>>>>>>>>>>> [ INFO ] Creating Image for 'hosted-engine.lockspace' ...
>>>>>>>>>>>>>>>> [ INFO ] Image for 'hosted-engine.lockspace' created successfully
>>>>>>>>>>>>>>>> [ INFO ] Creating Image for 'hosted-engine.metadata' ...
>>>>>>>>>>>>>>>> [ INFO ] Image for 'hosted-engine.metadata' created successfully
>>>>>>>>>>>>>>>> [ INFO ] Creating VM Image
>>>>>>>>>>>>>>>> [ INFO ] Destroying Storage Pool
>>>>>>>>>>>>>>>> [ INFO ] Start monitoring domain
>>>>>>>>>>>>>>>> [ INFO ] Configuring VM
>>>>>>>>>>>>>>>> [ INFO ] Updating hosted-engine configuration
>>>>>>>>>>>>>>>> [ INFO ] Stage: Transaction commit
>>>>>>>>>>>>>>>> [ INFO ] Stage: Closing up
>>>>>>>>>>>>>>>> [ INFO ] Creating VM
>>>>>>>>>>>>>>>> You can now connect to the VM with the following command:
>>>>>>>>>>>>>>>> /bin/remote-viewer vnc://localhost:5900
>>>>>>>>>>>>>>>> ...
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> What could be the problem?
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>> Users mailing list
>>>>>>>>>>>>>>>> Users at ovirt.org
>>>>>>>>>>>>>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>>>>> _______________________________________________
>>>>>>> Users mailing list
>>>>>>> Users at ovirt.org
>>>>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>>
>>>> _______________________________________________
>>>> Users mailing list
>>>> Users at ovirt.org
>>>> http://lists.ovirt.org/mailman/listinfo/users
>
> _______________________________________________
> Users mailing list
> Users at ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
More information about the Users
mailing list