[ovirt-users] How to import a qcow2 disk into ovirt

Ondra Machacek omachace at redhat.com
Wed Oct 4 12:42:25 UTC 2017


Check this log file on engine machine:

 /var/log/ovirt-imageio-proxy/image-proxy.log

And this on the host which is used to upload:

 /var/log/ovirt-imageio-daemon/daemon.log

Any errors there?

On Wed, Oct 4, 2017 at 2:38 PM, nicola.gentile.to
<nicola.gentile.to at gmail.com> wrote:
> Thanks Alexander,
>
> nothing not work
> always the same error....
> any suggestions?
>
> thank
>
>
> Il 04/10/2017 14:12, Alexander Witte ha scritto:
>
> Hey Nick,
>
> I had the same problem and in my case the engine firewall was blocking.  I
> tried disabling it temporarily and it worked.  I think the specific port to
> allow is 54322.
>
>
> Sent from my iPhone
>
> On Oct 4, 2017, at 5:50 AM, nicola.gentile.to <nicola.gentile.to at gmail.com>
> wrote:
>
> hi,
> I tried to import qcow2 vm image (1.1) on ovirt.
> My version of ovirt is 4.1.6.2-1.el7.centos on centos.
>
> By admin portal I click on Disk-> Upload -> Start
> then I choose a file qcow2, I set the dimension and alias, but after
> inizialization the following message appears:
>
> Unable to upload image to disk a8c878e2-8255-4aa1-8954-a76e0bdf3b88 due to a
> network error. Make sure ovirt-imageio-proxy service is installed and
> configured, and ovirt-engine's certificate is registered as a valid CA in
> the browser. The certificate can be fetched from
> https://<engine_url>/ovirt-engine/services/pki-resource?resource=ca-certificate&format=X509-PEM-CA
>
> I have registered the certificate in the browser but nothing not work.
> I tried with Firefox and Chromium browsers.
>
> I tried to modify the ovirt-imageio-proxy.conf with setting 'use_ssl =
> false' but not work.
>
> I attach engine logs
>
> How can I solve? Thank very much
> Regards
>
> Nick
>
>
> Il 08/09/2016 09:00, Yaniv Dary ha scritto:
>
> Can you send a screenshot of your browser when the issue happens?
>
> Yaniv Dary
> Technical Product Manager
> Red Hat Israel Ltd.
> 34 Jerusalem Road
> Building A, 4th floor
> Ra'anana, Israel 4350109
>
> Tel : +972 (9) 7692306
>         8272306
> Email: ydary at redhat.com
> IRC : ydary
>
>
> On Fri, Sep 2, 2016 at 11:10 PM, Martín Follonier
> <martin.follonier at iquall.net> wrote:
>>
>>
>> Hi,
>>
>> I've done all the recommendations in this thread, and I'm still getting
>> the "Paused by System" message just after the transfer starts.
>>
>> Honestly I don't know were else to look at, cause I don't find any log
>> entry or packet capture that give me a hint about what is happening.
>>
>> I'll appreciate any help! Thank you in advance!
>>
>> Regards
>>
>> Martin
>>
>> On Thu, Sep 1, 2016 at 5:01 PM, Amit Aviram <aavi... at redhat.com> wrote:
>>
>> > You can do both,
>> > Through the database, the table is "vdc_options". change "option_value"
>> > where "option_name" = 'ImageProxyAddress' .
>> >
>> > On Thu, Sep 1, 2016 at 4:56 PM, Gianluca Cecchi
>> > <gianluca.cec... at gmail.com
>> > > wrote:
>> >
>> >> On Thu, Sep 1, 2016 at 3:53 PM, Amit Aviram <aavi... at redhat.com> wrote:
>> >>
>> >>> You can just replace this value in the DB and change it to the right
>> >>> FQDN, it is a config value named "ImageProxyAddress". replace
>> >>> "localhost"
>> >>> with the right address (notice that the port is there too).
>> >>>
>> >>> If this will keep happen after users will have the latest version, we
>> >>> will have to open a bug and fix whatever causes the URL to be
>> >>> "localhost".
>> >>>
>> >>>
>> >> Do you mean through "engine-config" or directly into database?
>> >> In this second case which is the table involved?
>> >>
>> >> Gianluca
>> >>
>> >
>> >
>>
>> [root at ractorshe bin]# systemctl stop ovirt-imageio-proxy
>>
>> engine=# select * from vdc_options where option_name='ImageProxyAddress';
>>  option_id |    option_name    |  option_value   | version
>> -----------+-------------------+-----------------+---------
>>        950 | ImageProxyAddress | localhost:54323 | general
>> (1 row)
>>
>> engine=# update vdc_options set option_value='ractorshe.mydomain:54323'
>> where option_name='ImageProxyAddress';
>> UPDATE 1
>> engine=# select * from vdc_options where option_name='ImageProxyAddress';
>> option_id |    option_name    |             option_value             |
>> version
>>
>> -----------+-------------------+--------------------------------------+---------
>>        950 | ImageProxyAddress | ractorshe.mydomain:54323 | general
>> (1 row)
>>
>> engine=#
>>
>> engine=# select * from vdc_options where option_name='ImageProxyAddress';
>> option_id |    option_name    |             option_value             |
>> version
>>
>> -----------+-------------------+--------------------------------------+---------
>>        950 | ImageProxyAddress | ractorshe.mydomain:54323 | general
>> (1 row)
>>
>>
>> systemctl stop ovirt-engine
>> (otherwise it remained localhost)
>>
>> systemctl start ovirt-engine
>>
>> systemctl start ovirt-imageio-proxy
>>
>> Now transfer is ok.
>> I tried a qcow2 disck configured as 40Gb but containing about 1.6Gb of
>> data.
>> I'm going to connect it to a VM and see if all is ok also from a contents
>> point of view.
>>
>> Gianluca
>>
>> _______________________________________________
>> Users mailing list
>> Users at ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>>
>>
>>
>> _______________________________________________
>> Users mailing list
>> Users at ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>>
>
>
>
> _______________________________________________
> Users mailing list
> Users at ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
>
> <engine.log>
>
> _______________________________________________
> Users mailing list
> Users at ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
>
>
> _______________________________________________
> Users mailing list
> Users at ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>


More information about the Users mailing list