<div dir="ltr">Yes, I can manually pass it through. Not necessarily looking to use this specific device (usb wifi adaptor) but was just handy. Here is the output:<br><br>Bus 001 Device 003: ID 0bda:8172 Realtek Semiconductor Corp. RTL8191SU 802.11n WLAN Adapter<br>
Device Descriptor:<br> bLength 18<br> bDescriptorType 1<br> bcdUSB 2.00<br> bDeviceClass 0 (Defined at Interface level)<br> bDeviceSubClass 0 <br> bDeviceProtocol 0 <br>
bMaxPacketSize0 64<br> idVendor 0x0bda Realtek Semiconductor Corp.<br> idProduct 0x8172 RTL8191SU 802.11n WLAN Adapter<br> bcdDevice 2.00<br> iManufacturer 1 Manufacturer Realtek <br>
iProduct 2 RTL8191S WLAN Adapter <br> iSerial 3 00e04c000001<br> bNumConfigurations 1<br> Configuration Descriptor:<br> bLength 9<br> bDescriptorType 2<br>
wTotalLength 46<br> bNumInterfaces 1<br> bConfigurationValue 1<br> iConfiguration 0 <br> bmAttributes 0x80<br> (Bus Powered)<br> MaxPower 500mA<br>
Interface Descriptor:<br> bLength 9<br> bDescriptorType 4<br> bInterfaceNumber 0<br> bAlternateSetting 0<br> bNumEndpoints 4<br> bInterfaceClass 255 Vendor Specific Class<br>
bInterfaceSubClass 255 Vendor Specific Subclass<br> bInterfaceProtocol 255 Vendor Specific Protocol<br> iInterface 0 <br> Endpoint Descriptor:<br> bLength 7<br>
bDescriptorType 5<br> bEndpointAddress 0x83 EP 3 IN<br> bmAttributes 2<br> Transfer Type Bulk<br> Synch Type None<br> Usage Type Data<br>
wMaxPacketSize 0x0200 1x 512 bytes<br> bInterval 0<br> Endpoint Descriptor:<br> bLength 7<br> bDescriptorType 5<br> bEndpointAddress 0x04 EP 4 OUT<br>
bmAttributes 2<br> Transfer Type Bulk<br> Synch Type None<br> Usage Type Data<br> wMaxPacketSize 0x0200 1x 512 bytes<br> bInterval 0<br>
Endpoint Descriptor:<br> bLength 7<br> bDescriptorType 5<br> bEndpointAddress 0x06 EP 6 OUT<br> bmAttributes 2<br> Transfer Type Bulk<br>
Synch Type None<br> Usage Type Data<br> wMaxPacketSize 0x0200 1x 512 bytes<br> bInterval 0<br> Endpoint Descriptor:<br> bLength 7<br>
bDescriptorType 5<br> bEndpointAddress 0x0d EP 13 OUT<br> bmAttributes 2<br> Transfer Type Bulk<br> Synch Type None<br> Usage Type Data<br>
wMaxPacketSize 0x0200 1x 512 bytes<br> bInterval 0<br>Device Qualifier (for other device speed):<br> bLength 10<br> bDescriptorType 6<br> bcdUSB 2.00<br>
bDeviceClass 0 (Defined at Interface level)<br> bDeviceSubClass 0 <br> bDeviceProtocol 0 <br> bMaxPacketSize0 64<br> bNumConfigurations 1<br>Device Status: 0x0000<br> (Bus Powered)<br>
<br>Bus 005 Device 002: ID 2101:020f ActionStar <br>Device Descriptor:<br> bLength 18<br> bDescriptorType 1<br> bcdUSB 1.00<br> bDeviceClass 0 (Defined at Interface level)<br>
bDeviceSubClass 0 <br> bDeviceProtocol 0 <br> bMaxPacketSize0 8<br> idVendor 0x2101 ActionStar<br> idProduct 0x020f <br> bcdDevice 0.01<br> iManufacturer 0 <br>
iProduct 0 <br> iSerial 0 <br> bNumConfigurations 1<br> Configuration Descriptor:<br> bLength 9<br> bDescriptorType 2<br> wTotalLength 59<br>
bNumInterfaces 2<br> bConfigurationValue 1<br> iConfiguration 0 <br> bmAttributes 0xa0<br> (Bus Powered)<br> Remote Wakeup<br> MaxPower 500mA<br> Interface Descriptor:<br>
bLength 9<br> bDescriptorType 4<br> bInterfaceNumber 0<br> bAlternateSetting 0<br> bNumEndpoints 1<br> bInterfaceClass 3 Human Interface Device<br>
bInterfaceSubClass 1 Boot Interface Subclass<br> bInterfaceProtocol 1 Keyboard<br> iInterface 0 <br> HID Device Descriptor:<br> bLength 9<br> bDescriptorType 33<br>
bcdHID 1.01<br> bCountryCode 0 Not supported<br> bNumDescriptors 1<br> bDescriptorType 34 Report<br> wDescriptorLength 63<br> Report Descriptors: <br>
** UNAVAILABLE **<br> Endpoint Descriptor:<br> bLength 7<br> bDescriptorType 5<br> bEndpointAddress 0x81 EP 1 IN<br> bmAttributes 3<br> Transfer Type Interrupt<br>
Synch Type None<br> Usage Type Data<br> wMaxPacketSize 0x0008 1x 8 bytes<br> bInterval 10<br> Interface Descriptor:<br> bLength 9<br>
bDescriptorType 4<br> bInterfaceNumber 1<br> bAlternateSetting 0<br> bNumEndpoints 1<br> bInterfaceClass 3 Human Interface Device<br> bInterfaceSubClass 1 Boot Interface Subclass<br>
bInterfaceProtocol 2 Mouse<br> iInterface 0 <br> HID Device Descriptor:<br> bLength 9<br> bDescriptorType 33<br> bcdHID 1.01<br>
bCountryCode 0 Not supported<br> bNumDescriptors 1<br> bDescriptorType 34 Report<br> wDescriptorLength 72<br> Report Descriptors: <br> ** UNAVAILABLE **<br>
Endpoint Descriptor:<br> bLength 7<br> bDescriptorType 5<br> bEndpointAddress 0x82 EP 2 IN<br> bmAttributes 3<br> Transfer Type Interrupt<br>
Synch Type None<br> Usage Type Data<br> wMaxPacketSize 0x0008 1x 8 bytes<br> bInterval 10<br>Device Status: 0x0002<br> (Bus Powered)<br> Remote Wakeup Enabled<br>
<br>Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub<br>Device Descriptor:<br> bLength 18<br> bDescriptorType 1<br> bcdUSB 2.00<br> bDeviceClass 9 Hub<br> bDeviceSubClass 0 Unused<br>
bDeviceProtocol 0 Full speed (or root) hub<br> bMaxPacketSize0 64<br> idVendor 0x1d6b Linux Foundation<br> idProduct 0x0002 2.0 root hub<br> bcdDevice 3.06<br> iManufacturer 3 Linux 3.6.10-4.fc18.x86_64 ehci_hcd<br>
iProduct 2 EHCI Host Controller<br> iSerial 1 0000:00:1d.7<br> bNumConfigurations 1<br> Configuration Descriptor:<br> bLength 9<br> bDescriptorType 2<br>
wTotalLength 25<br> bNumInterfaces 1<br> bConfigurationValue 1<br> iConfiguration 0 <br> bmAttributes 0xe0<br> Self Powered<br> Remote Wakeup<br> MaxPower 0mA<br>
Interface Descriptor:<br> bLength 9<br> bDescriptorType 4<br> bInterfaceNumber 0<br> bAlternateSetting 0<br> bNumEndpoints 1<br> bInterfaceClass 9 Hub<br>
bInterfaceSubClass 0 Unused<br> bInterfaceProtocol 0 Full speed (or root) hub<br> iInterface 0 <br> Endpoint Descriptor:<br> bLength 7<br> bDescriptorType 5<br>
bEndpointAddress 0x81 EP 1 IN<br> bmAttributes 3<br> Transfer Type Interrupt<br> Synch Type None<br> Usage Type Data<br> wMaxPacketSize 0x0004 1x 4 bytes<br>
bInterval 12<br>Hub Descriptor:<br> bLength 11<br> bDescriptorType 41<br> nNbrPorts 8<br> wHubCharacteristic 0x000a<br> No power switching (usb 1.0)<br> Per-port overcurrent protection<br>
bPwrOn2PwrGood 10 * 2 milli seconds<br> bHubContrCurrent 0 milli Ampere<br> DeviceRemovable 0x00 0x00<br> PortPwrCtrlMask 0xff 0xff<br> Hub Port Status:<br> Port 1: 0000.0100 power<br> Port 2: 0000.0100 power<br>
Port 3: 0000.0100 power<br> Port 4: 0000.0100 power<br> Port 5: 0000.0100 power<br> Port 6: 0000.0503 highspeed power enable connect<br> Port 7: 0000.0100 power<br> Port 8: 0000.0100 power<br>Device Status: 0x0001<br>
Self Powered<br><br>Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub<br>Device Descriptor:<br> bLength 18<br> bDescriptorType 1<br> bcdUSB 1.10<br> bDeviceClass 9 Hub<br>
bDeviceSubClass 0 Unused<br> bDeviceProtocol 0 Full speed (or root) hub<br> bMaxPacketSize0 64<br> idVendor 0x1d6b Linux Foundation<br> idProduct 0x0001 1.1 root hub<br> bcdDevice 3.06<br>
iManufacturer 3 Linux 3.6.10-4.fc18.x86_64 uhci_hcd<br> iProduct 2 UHCI Host Controller<br> iSerial 1 0000:00:1d.0<br> bNumConfigurations 1<br> Configuration Descriptor:<br>
bLength 9<br> bDescriptorType 2<br> wTotalLength 25<br> bNumInterfaces 1<br> bConfigurationValue 1<br> iConfiguration 0 <br> bmAttributes 0xe0<br>
Self Powered<br> Remote Wakeup<br> MaxPower 0mA<br> Interface Descriptor:<br> bLength 9<br> bDescriptorType 4<br> bInterfaceNumber 0<br> bAlternateSetting 0<br>
bNumEndpoints 1<br> bInterfaceClass 9 Hub<br> bInterfaceSubClass 0 Unused<br> bInterfaceProtocol 0 Full speed (or root) hub<br> iInterface 0 <br> Endpoint Descriptor:<br>
bLength 7<br> bDescriptorType 5<br> bEndpointAddress 0x81 EP 1 IN<br> bmAttributes 3<br> Transfer Type Interrupt<br> Synch Type None<br>
Usage Type Data<br> wMaxPacketSize 0x0002 1x 2 bytes<br> bInterval 255<br>Hub Descriptor:<br> bLength 9<br> bDescriptorType 41<br> nNbrPorts 2<br>
wHubCharacteristic 0x000a<br> No power switching (usb 1.0)<br> Per-port overcurrent protection<br> bPwrOn2PwrGood 1 * 2 milli seconds<br> bHubContrCurrent 0 milli Ampere<br> DeviceRemovable 0x00<br>
PortPwrCtrlMask 0xff<br> Hub Port Status:<br> Port 1: 0000.0100 power<br> Port 2: 0000.0100 power<br>Device Status: 0x0001<br> Self Powered<br><br>Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub<br>
Device Descriptor:<br> bLength 18<br> bDescriptorType 1<br> bcdUSB 1.10<br> bDeviceClass 9 Hub<br> bDeviceSubClass 0 Unused<br> bDeviceProtocol 0 Full speed (or root) hub<br>
bMaxPacketSize0 64<br> idVendor 0x1d6b Linux Foundation<br> idProduct 0x0001 1.1 root hub<br> bcdDevice 3.06<br> iManufacturer 3 Linux 3.6.10-4.fc18.x86_64 uhci_hcd<br>
iProduct 2 UHCI Host Controller<br> iSerial 1 0000:00:1d.1<br> bNumConfigurations 1<br> Configuration Descriptor:<br> bLength 9<br> bDescriptorType 2<br>
wTotalLength 25<br> bNumInterfaces 1<br> bConfigurationValue 1<br> iConfiguration 0 <br> bmAttributes 0xe0<br> Self Powered<br> Remote Wakeup<br> MaxPower 0mA<br>
Interface Descriptor:<br> bLength 9<br> bDescriptorType 4<br> bInterfaceNumber 0<br> bAlternateSetting 0<br> bNumEndpoints 1<br> bInterfaceClass 9 Hub<br>
bInterfaceSubClass 0 Unused<br> bInterfaceProtocol 0 Full speed (or root) hub<br> iInterface 0 <br> Endpoint Descriptor:<br> bLength 7<br> bDescriptorType 5<br>
bEndpointAddress 0x81 EP 1 IN<br> bmAttributes 3<br> Transfer Type Interrupt<br> Synch Type None<br> Usage Type Data<br> wMaxPacketSize 0x0002 1x 2 bytes<br>
bInterval 255<br>Hub Descriptor:<br> bLength 9<br> bDescriptorType 41<br> nNbrPorts 2<br> wHubCharacteristic 0x000a<br> No power switching (usb 1.0)<br> Per-port overcurrent protection<br>
bPwrOn2PwrGood 1 * 2 milli seconds<br> bHubContrCurrent 0 milli Ampere<br> DeviceRemovable 0x00<br> PortPwrCtrlMask 0xff<br> Hub Port Status:<br> Port 1: 0000.0100 power<br> Port 2: 0000.0100 power<br>
Device Status: 0x0001<br> Self Powered<br><br>Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub<br>Device Descriptor:<br> bLength 18<br> bDescriptorType 1<br> bcdUSB 1.10<br>
bDeviceClass 9 Hub<br> bDeviceSubClass 0 Unused<br> bDeviceProtocol 0 Full speed (or root) hub<br> bMaxPacketSize0 64<br> idVendor 0x1d6b Linux Foundation<br> idProduct 0x0001 1.1 root hub<br>
bcdDevice 3.06<br> iManufacturer 3 Linux 3.6.10-4.fc18.x86_64 uhci_hcd<br> iProduct 2 UHCI Host Controller<br> iSerial 1 0000:00:1d.2<br> bNumConfigurations 1<br>
Configuration Descriptor:<br> bLength 9<br> bDescriptorType 2<br> wTotalLength 25<br> bNumInterfaces 1<br> bConfigurationValue 1<br> iConfiguration 0 <br>
bmAttributes 0xe0<br> Self Powered<br> Remote Wakeup<br> MaxPower 0mA<br> Interface Descriptor:<br> bLength 9<br> bDescriptorType 4<br> bInterfaceNumber 0<br>
bAlternateSetting 0<br> bNumEndpoints 1<br> bInterfaceClass 9 Hub<br> bInterfaceSubClass 0 Unused<br> bInterfaceProtocol 0 Full speed (or root) hub<br> iInterface 0 <br>
Endpoint Descriptor:<br> bLength 7<br> bDescriptorType 5<br> bEndpointAddress 0x81 EP 1 IN<br> bmAttributes 3<br> Transfer Type Interrupt<br>
Synch Type None<br> Usage Type Data<br> wMaxPacketSize 0x0002 1x 2 bytes<br> bInterval 255<br>Hub Descriptor:<br> bLength 9<br> bDescriptorType 41<br>
nNbrPorts 2<br> wHubCharacteristic 0x000a<br> No power switching (usb 1.0)<br> Per-port overcurrent protection<br> bPwrOn2PwrGood 1 * 2 milli seconds<br> bHubContrCurrent 0 milli Ampere<br>
DeviceRemovable 0x00<br> PortPwrCtrlMask 0xff<br> Hub Port Status:<br> Port 1: 0000.0100 power<br> Port 2: 0000.0100 power<br>Device Status: 0x0001<br> Self Powered<br><br>Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub<br>
Device Descriptor:<br> bLength 18<br> bDescriptorType 1<br> bcdUSB 1.10<br> bDeviceClass 9 Hub<br> bDeviceSubClass 0 Unused<br> bDeviceProtocol 0 Full speed (or root) hub<br>
bMaxPacketSize0 64<br> idVendor 0x1d6b Linux Foundation<br> idProduct 0x0001 1.1 root hub<br> bcdDevice 3.06<br> iManufacturer 3 Linux 3.6.10-4.fc18.x86_64 uhci_hcd<br>
iProduct 2 UHCI Host Controller<br> iSerial 1 0000:00:1d.3<br> bNumConfigurations 1<br> Configuration Descriptor:<br> bLength 9<br> bDescriptorType 2<br>
wTotalLength 25<br> bNumInterfaces 1<br> bConfigurationValue 1<br> iConfiguration 0 <br> bmAttributes 0xe0<br> Self Powered<br> Remote Wakeup<br> MaxPower 0mA<br>
Interface Descriptor:<br> bLength 9<br> bDescriptorType 4<br> bInterfaceNumber 0<br> bAlternateSetting 0<br> bNumEndpoints 1<br> bInterfaceClass 9 Hub<br>
bInterfaceSubClass 0 Unused<br> bInterfaceProtocol 0 Full speed (or root) hub<br> iInterface 0 <br> Endpoint Descriptor:<br> bLength 7<br> bDescriptorType 5<br>
bEndpointAddress 0x81 EP 1 IN<br> bmAttributes 3<br> Transfer Type Interrupt<br> Synch Type None<br> Usage Type Data<br> wMaxPacketSize 0x0002 1x 2 bytes<br>
bInterval 255<br>Hub Descriptor:<br> bLength 9<br> bDescriptorType 41<br> nNbrPorts 2<br> wHubCharacteristic 0x000a<br> No power switching (usb 1.0)<br> Per-port overcurrent protection<br>
bPwrOn2PwrGood 1 * 2 milli seconds<br> bHubContrCurrent 0 milli Ampere<br> DeviceRemovable 0x00<br> PortPwrCtrlMask 0xff<br> Hub Port Status:<br> Port 1: 0000.0100 power<br> Port 2: 0000.0303 lowspeed power enable connect<br>
Device Status: 0x0001<br> Self Powered<br><br></div><div class="gmail_extra"><br><br><div class="gmail_quote">On Thu, May 30, 2013 at 8:27 AM, Hans de Goede <span dir="ltr"><<a href="mailto:hdegoede@redhat.com" target="_blank">hdegoede@redhat.com</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">Hi,<div class="im"><br>
<br>
On 05/30/2013 04:17 PM, Ryan Wilkinson wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
Hans,<br>
<br>
Thanks for the info. Remote viewer has keyboard focus when attempting usb pass-through. Just tried again to confirm. These are the two package versions I'm seeing that are installed:<br>
<br>
virt-viewer.x86_64 0.5.4-3.fc18<br>
virt-viewer.i686 0.5.3-1.fc17<br>
</blockquote>
<br></div>
And you can pass the device through manually from the menu?<br>
<br>
Can you do lsusb -v with the device plugin and then copy and<br>
paste the output for the device in question into your next mail ?<br>
<br>
Regards,<br>
<br>
Hans<br>
</blockquote></div><br></div>