<div dir="ltr">Any more info. on this issue?<br></div><div class="gmail_extra"><br><br><div class="gmail_quote">On Thu, May 30, 2013 at 9:10 AM, Ryan Wilkinson <span dir="ltr"><<a href="mailto:ryanwilk@gmail.com" target="_blank">ryanwilk@gmail.com</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="ltr">I didn't install double. The one package was the version on the FC17 box and the other was FC18 box.<br>
</div><div class="HOEnZb"><div class="h5"><div class="gmail_extra"><br><br><div class="gmail_quote">On Thu, May 30, 2013 at 9:08 AM, Hans de Goede <span dir="ltr"><<a href="mailto:hdegoede@redhat.com" target="_blank">hdegoede@redhat.com</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">Hi,<div><br>
<br>
On 05/30/2013 04:34 PM, Ryan Wilkinson wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
Yes, I can manually pass it through. Not necessarily looking to use this specific device (usb wifi adaptor) but was just handy. Here is the output:<br>
</blockquote>
<br></div>
Hmm, that should work.<br>
<br>
I just noticed that in your last mail you mentioned that you've virt-viewer installed<br>
"double".<br>
<br>
Can you try doing:<br>
<br>
rpm -e --allmatches virt-viewer<br>
yum install virt-viewer<br>
<br>
And see if that fixes things ?<br>
<br>
Regards,<br>
<br>
Hans<br>
<br>
<br>
<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div><div>
<br>
Bus 001 Device 003: ID 0bda:8172 Realtek Semiconductor Corp. RTL8191SU 802.11n WLAN Adapter<br>
Device Descriptor:<br>
bLength 18<br>
bDescriptorType 1<br>
bcdUSB 2.00<br>
bDeviceClass 0 (Defined at Interface level)<br>
bDeviceSubClass 0<br>
bDeviceProtocol 0<br>
bMaxPacketSize0 64<br>
idVendor 0x0bda Realtek Semiconductor Corp.<br>
idProduct 0x8172 RTL8191SU 802.11n WLAN Adapter<br>
bcdDevice 2.00<br>
iManufacturer 1 Manufacturer Realtek<br>
iProduct 2 RTL8191S WLAN Adapter<br>
iSerial 3 00e04c000001<br>
bNumConfigurations 1<br>
Configuration Descriptor:<br>
bLength 9<br>
bDescriptorType 2<br>
wTotalLength 46<br>
bNumInterfaces 1<br>
bConfigurationValue 1<br>
iConfiguration 0<br>
bmAttributes 0x80<br>
(Bus Powered)<br>
MaxPower 500mA<br>
Interface Descriptor:<br>
bLength 9<br>
bDescriptorType 4<br>
bInterfaceNumber 0<br>
bAlternateSetting 0<br>
bNumEndpoints 4<br>
bInterfaceClass 255 Vendor Specific Class<br>
bInterfaceSubClass 255 Vendor Specific Subclass<br>
bInterfaceProtocol 255 Vendor Specific Protocol<br>
iInterface 0<br>
Endpoint Descriptor:<br>
bLength 7<br>
bDescriptorType 5<br>
bEndpointAddress 0x83 EP 3 IN<br>
bmAttributes 2<br>
Transfer Type Bulk<br>
Synch Type None<br>
Usage Type Data<br>
wMaxPacketSize 0x0200 1x 512 bytes<br>
bInterval 0<br>
Endpoint Descriptor:<br>
bLength 7<br>
bDescriptorType 5<br>
bEndpointAddress 0x04 EP 4 OUT<br>
bmAttributes 2<br>
Transfer Type Bulk<br>
Synch Type None<br>
Usage Type Data<br>
wMaxPacketSize 0x0200 1x 512 bytes<br>
bInterval 0<br>
Endpoint Descriptor:<br>
bLength 7<br>
bDescriptorType 5<br>
bEndpointAddress 0x06 EP 6 OUT<br>
bmAttributes 2<br>
Transfer Type Bulk<br>
Synch Type None<br>
Usage Type Data<br>
wMaxPacketSize 0x0200 1x 512 bytes<br>
bInterval 0<br>
Endpoint Descriptor:<br>
bLength 7<br>
bDescriptorType 5<br>
bEndpointAddress 0x0d EP 13 OUT<br>
bmAttributes 2<br>
Transfer Type Bulk<br>
Synch Type None<br>
Usage Type Data<br>
wMaxPacketSize 0x0200 1x 512 bytes<br>
bInterval 0<br>
Device Qualifier (for other device speed):<br>
bLength 10<br>
bDescriptorType 6<br>
bcdUSB 2.00<br>
bDeviceClass 0 (Defined at Interface level)<br>
bDeviceSubClass 0<br>
bDeviceProtocol 0<br>
bMaxPacketSize0 64<br>
bNumConfigurations 1<br>
Device Status: 0x0000<br>
(Bus Powered)<br>
<br>
Bus 005 Device 002: ID 2101:020f ActionStar<br>
Device Descriptor:<br>
bLength 18<br>
bDescriptorType 1<br>
bcdUSB 1.00<br>
bDeviceClass 0 (Defined at Interface level)<br>
bDeviceSubClass 0<br>
bDeviceProtocol 0<br>
bMaxPacketSize0 8<br>
idVendor 0x2101 ActionStar<br>
idProduct 0x020f<br>
bcdDevice 0.01<br>
iManufacturer 0<br>
iProduct 0<br>
iSerial 0<br>
bNumConfigurations 1<br>
Configuration Descriptor:<br>
bLength 9<br>
bDescriptorType 2<br>
wTotalLength 59<br>
bNumInterfaces 2<br>
bConfigurationValue 1<br>
iConfiguration 0<br>
bmAttributes 0xa0<br>
(Bus Powered)<br>
Remote Wakeup<br>
MaxPower 500mA<br>
Interface Descriptor:<br>
bLength 9<br>
bDescriptorType 4<br>
bInterfaceNumber 0<br>
bAlternateSetting 0<br>
bNumEndpoints 1<br>
bInterfaceClass 3 Human Interface Device<br>
bInterfaceSubClass 1 Boot Interface Subclass<br>
bInterfaceProtocol 1 Keyboard<br>
iInterface 0<br>
HID Device Descriptor:<br>
bLength 9<br>
bDescriptorType 33<br>
bcdHID 1.01<br>
bCountryCode 0 Not supported<br>
bNumDescriptors 1<br>
bDescriptorType 34 Report<br>
wDescriptorLength 63<br>
Report Descriptors:<br>
** UNAVAILABLE **<br>
Endpoint Descriptor:<br>
bLength 7<br>
bDescriptorType 5<br>
bEndpointAddress 0x81 EP 1 IN<br>
bmAttributes 3<br>
Transfer Type Interrupt<br>
Synch Type None<br>
Usage Type Data<br>
wMaxPacketSize 0x0008 1x 8 bytes<br>
bInterval 10<br>
Interface Descriptor:<br>
bLength 9<br>
bDescriptorType 4<br>
bInterfaceNumber 1<br>
bAlternateSetting 0<br>
bNumEndpoints 1<br>
bInterfaceClass 3 Human Interface Device<br>
bInterfaceSubClass 1 Boot Interface Subclass<br>
bInterfaceProtocol 2 Mouse<br>
iInterface 0<br>
HID Device Descriptor:<br>
bLength 9<br>
bDescriptorType 33<br>
bcdHID 1.01<br>
bCountryCode 0 Not supported<br>
bNumDescriptors 1<br>
bDescriptorType 34 Report<br>
wDescriptorLength 72<br>
Report Descriptors:<br>
** UNAVAILABLE **<br>
Endpoint Descriptor:<br>
bLength 7<br>
bDescriptorType 5<br>
bEndpointAddress 0x82 EP 2 IN<br>
bmAttributes 3<br>
Transfer Type Interrupt<br>
Synch Type None<br>
Usage Type Data<br>
wMaxPacketSize 0x0008 1x 8 bytes<br>
bInterval 10<br>
Device Status: 0x0002<br>
(Bus Powered)<br>
Remote Wakeup Enabled<br>
<br>
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub<br>
Device Descriptor:<br>
bLength 18<br>
bDescriptorType 1<br>
bcdUSB 2.00<br>
bDeviceClass 9 Hub<br>
bDeviceSubClass 0 Unused<br>
bDeviceProtocol 0 Full speed (or root) hub<br>
bMaxPacketSize0 64<br>
idVendor 0x1d6b Linux Foundation<br>
idProduct 0x0002 2.0 root hub<br>
bcdDevice 3.06<br>
iManufacturer 3 Linux 3.6.10-4.fc18.x86_64 ehci_hcd<br>
iProduct 2 EHCI Host Controller<br>
iSerial 1 0000:00:1d.7<br>
bNumConfigurations 1<br>
Configuration Descriptor:<br>
bLength 9<br>
bDescriptorType 2<br>
wTotalLength 25<br>
bNumInterfaces 1<br>
bConfigurationValue 1<br>
iConfiguration 0<br>
bmAttributes 0xe0<br>
Self Powered<br>
Remote Wakeup<br>
MaxPower 0mA<br>
Interface Descriptor:<br>
bLength 9<br>
bDescriptorType 4<br>
bInterfaceNumber 0<br>
bAlternateSetting 0<br>
bNumEndpoints 1<br>
bInterfaceClass 9 Hub<br>
bInterfaceSubClass 0 Unused<br>
bInterfaceProtocol 0 Full speed (or root) hub<br>
iInterface 0<br>
Endpoint Descriptor:<br>
bLength 7<br>
bDescriptorType 5<br>
bEndpointAddress 0x81 EP 1 IN<br>
bmAttributes 3<br>
Transfer Type Interrupt<br>
Synch Type None<br>
Usage Type Data<br>
wMaxPacketSize 0x0004 1x 4 bytes<br>
bInterval 12<br>
Hub Descriptor:<br>
bLength 11<br>
bDescriptorType 41<br>
nNbrPorts 8<br>
wHubCharacteristic 0x000a<br>
No power switching (usb 1.0)<br>
Per-port overcurrent protection<br>
bPwrOn2PwrGood 10 * 2 milli seconds<br>
bHubContrCurrent 0 milli Ampere<br>
DeviceRemovable 0x00 0x00<br>
PortPwrCtrlMask 0xff 0xff<br>
Hub Port Status:<br>
Port 1: 0000.0100 power<br>
Port 2: 0000.0100 power<br>
Port 3: 0000.0100 power<br>
Port 4: 0000.0100 power<br>
Port 5: 0000.0100 power<br>
Port 6: 0000.0503 highspeed power enable connect<br>
Port 7: 0000.0100 power<br>
Port 8: 0000.0100 power<br>
Device Status: 0x0001<br>
Self Powered<br>
<br>
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub<br>
Device Descriptor:<br>
bLength 18<br>
bDescriptorType 1<br>
bcdUSB 1.10<br>
bDeviceClass 9 Hub<br>
bDeviceSubClass 0 Unused<br>
bDeviceProtocol 0 Full speed (or root) hub<br>
bMaxPacketSize0 64<br>
idVendor 0x1d6b Linux Foundation<br>
idProduct 0x0001 1.1 root hub<br>
bcdDevice 3.06<br>
iManufacturer 3 Linux 3.6.10-4.fc18.x86_64 uhci_hcd<br>
iProduct 2 UHCI Host Controller<br>
iSerial 1 0000:00:1d.0<br>
bNumConfigurations 1<br>
Configuration Descriptor:<br>
bLength 9<br>
bDescriptorType 2<br>
wTotalLength 25<br>
bNumInterfaces 1<br>
bConfigurationValue 1<br>
iConfiguration 0<br>
bmAttributes 0xe0<br>
Self Powered<br>
Remote Wakeup<br>
MaxPower 0mA<br>
Interface Descriptor:<br>
bLength 9<br>
bDescriptorType 4<br>
bInterfaceNumber 0<br>
bAlternateSetting 0<br>
bNumEndpoints 1<br>
bInterfaceClass 9 Hub<br>
bInterfaceSubClass 0 Unused<br>
bInterfaceProtocol 0 Full speed (or root) hub<br>
iInterface 0<br>
Endpoint Descriptor:<br>
bLength 7<br>
bDescriptorType 5<br>
bEndpointAddress 0x81 EP 1 IN<br>
bmAttributes 3<br>
Transfer Type Interrupt<br>
Synch Type None<br>
Usage Type Data<br>
wMaxPacketSize 0x0002 1x 2 bytes<br>
bInterval 255<br>
Hub Descriptor:<br>
bLength 9<br>
bDescriptorType 41<br>
nNbrPorts 2<br>
wHubCharacteristic 0x000a<br>
No power switching (usb 1.0)<br>
Per-port overcurrent protection<br>
bPwrOn2PwrGood 1 * 2 milli seconds<br>
bHubContrCurrent 0 milli Ampere<br>
DeviceRemovable 0x00<br>
PortPwrCtrlMask 0xff<br>
Hub Port Status:<br>
Port 1: 0000.0100 power<br>
Port 2: 0000.0100 power<br>
Device Status: 0x0001<br>
Self Powered<br>
<br>
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub<br>
Device Descriptor:<br>
bLength 18<br>
bDescriptorType 1<br>
bcdUSB 1.10<br>
bDeviceClass 9 Hub<br>
bDeviceSubClass 0 Unused<br>
bDeviceProtocol 0 Full speed (or root) hub<br>
bMaxPacketSize0 64<br>
idVendor 0x1d6b Linux Foundation<br>
idProduct 0x0001 1.1 root hub<br>
bcdDevice 3.06<br>
iManufacturer 3 Linux 3.6.10-4.fc18.x86_64 uhci_hcd<br>
iProduct 2 UHCI Host Controller<br>
iSerial 1 0000:00:1d.1<br>
bNumConfigurations 1<br>
Configuration Descriptor:<br>
bLength 9<br>
bDescriptorType 2<br>
wTotalLength 25<br>
bNumInterfaces 1<br>
bConfigurationValue 1<br>
iConfiguration 0<br>
bmAttributes 0xe0<br>
Self Powered<br>
Remote Wakeup<br>
MaxPower 0mA<br>
Interface Descriptor:<br>
bLength 9<br>
bDescriptorType 4<br>
bInterfaceNumber 0<br>
bAlternateSetting 0<br>
bNumEndpoints 1<br>
bInterfaceClass 9 Hub<br>
bInterfaceSubClass 0 Unused<br>
bInterfaceProtocol 0 Full speed (or root) hub<br>
iInterface 0<br>
Endpoint Descriptor:<br>
bLength 7<br>
bDescriptorType 5<br>
bEndpointAddress 0x81 EP 1 IN<br>
bmAttributes 3<br>
Transfer Type Interrupt<br>
Synch Type None<br>
Usage Type Data<br>
wMaxPacketSize 0x0002 1x 2 bytes<br>
bInterval 255<br>
Hub Descriptor:<br>
bLength 9<br>
bDescriptorType 41<br>
nNbrPorts 2<br>
wHubCharacteristic 0x000a<br>
No power switching (usb 1.0)<br>
Per-port overcurrent protection<br>
bPwrOn2PwrGood 1 * 2 milli seconds<br>
bHubContrCurrent 0 milli Ampere<br>
DeviceRemovable 0x00<br>
PortPwrCtrlMask 0xff<br>
Hub Port Status:<br>
Port 1: 0000.0100 power<br>
Port 2: 0000.0100 power<br>
Device Status: 0x0001<br>
Self Powered<br>
<br>
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub<br>
Device Descriptor:<br>
bLength 18<br>
bDescriptorType 1<br>
bcdUSB 1.10<br>
bDeviceClass 9 Hub<br>
bDeviceSubClass 0 Unused<br>
bDeviceProtocol 0 Full speed (or root) hub<br>
bMaxPacketSize0 64<br>
idVendor 0x1d6b Linux Foundation<br>
idProduct 0x0001 1.1 root hub<br>
bcdDevice 3.06<br>
iManufacturer 3 Linux 3.6.10-4.fc18.x86_64 uhci_hcd<br>
iProduct 2 UHCI Host Controller<br>
iSerial 1 0000:00:1d.2<br>
bNumConfigurations 1<br>
Configuration Descriptor:<br>
bLength 9<br>
bDescriptorType 2<br>
wTotalLength 25<br>
bNumInterfaces 1<br>
bConfigurationValue 1<br>
iConfiguration 0<br>
bmAttributes 0xe0<br>
Self Powered<br>
Remote Wakeup<br>
MaxPower 0mA<br>
Interface Descriptor:<br>
bLength 9<br>
bDescriptorType 4<br>
bInterfaceNumber 0<br>
bAlternateSetting 0<br>
bNumEndpoints 1<br>
bInterfaceClass 9 Hub<br>
bInterfaceSubClass 0 Unused<br>
bInterfaceProtocol 0 Full speed (or root) hub<br>
iInterface 0<br>
Endpoint Descriptor:<br>
bLength 7<br>
bDescriptorType 5<br>
bEndpointAddress 0x81 EP 1 IN<br>
bmAttributes 3<br>
Transfer Type Interrupt<br>
Synch Type None<br>
Usage Type Data<br>
wMaxPacketSize 0x0002 1x 2 bytes<br>
bInterval 255<br>
Hub Descriptor:<br>
bLength 9<br>
bDescriptorType 41<br>
nNbrPorts 2<br>
wHubCharacteristic 0x000a<br>
No power switching (usb 1.0)<br>
Per-port overcurrent protection<br>
bPwrOn2PwrGood 1 * 2 milli seconds<br>
bHubContrCurrent 0 milli Ampere<br>
DeviceRemovable 0x00<br>
PortPwrCtrlMask 0xff<br>
Hub Port Status:<br>
Port 1: 0000.0100 power<br>
Port 2: 0000.0100 power<br>
Device Status: 0x0001<br>
Self Powered<br>
<br>
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub<br>
Device Descriptor:<br>
bLength 18<br>
bDescriptorType 1<br>
bcdUSB 1.10<br>
bDeviceClass 9 Hub<br>
bDeviceSubClass 0 Unused<br>
bDeviceProtocol 0 Full speed (or root) hub<br>
bMaxPacketSize0 64<br>
idVendor 0x1d6b Linux Foundation<br>
idProduct 0x0001 1.1 root hub<br>
bcdDevice 3.06<br>
iManufacturer 3 Linux 3.6.10-4.fc18.x86_64 uhci_hcd<br>
iProduct 2 UHCI Host Controller<br>
iSerial 1 0000:00:1d.3<br>
bNumConfigurations 1<br>
Configuration Descriptor:<br>
bLength 9<br>
bDescriptorType 2<br>
wTotalLength 25<br>
bNumInterfaces 1<br>
bConfigurationValue 1<br>
iConfiguration 0<br>
bmAttributes 0xe0<br>
Self Powered<br>
Remote Wakeup<br>
MaxPower 0mA<br>
Interface Descriptor:<br>
bLength 9<br>
bDescriptorType 4<br>
bInterfaceNumber 0<br>
bAlternateSetting 0<br>
bNumEndpoints 1<br>
bInterfaceClass 9 Hub<br>
bInterfaceSubClass 0 Unused<br>
bInterfaceProtocol 0 Full speed (or root) hub<br>
iInterface 0<br>
Endpoint Descriptor:<br>
bLength 7<br>
bDescriptorType 5<br>
bEndpointAddress 0x81 EP 1 IN<br>
bmAttributes 3<br>
Transfer Type Interrupt<br>
Synch Type None<br>
Usage Type Data<br>
wMaxPacketSize 0x0002 1x 2 bytes<br>
bInterval 255<br>
Hub Descriptor:<br>
bLength 9<br>
bDescriptorType 41<br>
nNbrPorts 2<br>
wHubCharacteristic 0x000a<br>
No power switching (usb 1.0)<br>
Per-port overcurrent protection<br>
bPwrOn2PwrGood 1 * 2 milli seconds<br>
bHubContrCurrent 0 milli Ampere<br>
DeviceRemovable 0x00<br>
PortPwrCtrlMask 0xff<br>
Hub Port Status:<br>
Port 1: 0000.0100 power<br>
Port 2: 0000.0303 lowspeed power enable connect<br>
Device Status: 0x0001<br>
Self Powered<br>
<br>
<br>
<br></div></div><div>
On Thu, May 30, 2013 at 8:27 AM, Hans de Goede <<a href="mailto:hdegoede@redhat.com" target="_blank">hdegoede@redhat.com</a> <mailto:<a href="mailto:hdegoede@redhat.com" target="_blank">hdegoede@redhat.com</a>>> wrote:<br>
<br>
Hi,<br>
<br>
<br>
On 05/30/2013 04:17 PM, Ryan Wilkinson wrote:<br>
<br>
Hans,<br>
<br>
Thanks for the info. Remote viewer has keyboard focus when attempting usb pass-through. Just tried again to confirm. These are the two package versions I'm seeing that are installed:<br>
<br>
virt-viewer.x86_64 0.5.4-3.fc18<br>
virt-viewer.i686 0.5.3-1.fc17<br>
<br>
<br>
And you can pass the device through manually from the menu?<br>
<br>
Can you do lsusb -v with the device plugin and then copy and<br>
paste the output for the device in question into your next mail ?<br>
<br>
Regards,<br>
<br>
Hans<br>
<br>
<br>
</div></blockquote>
</blockquote></div><br></div>
</div></div></blockquote></div><br></div>