<p dir="ltr"><br>
On 23 Jul 2013 21:34, "Jason Keltz" <<a href="mailto:jas@cse.yorku.ca">jas@cse.yorku.ca</a>> wrote:<br>
><br>
> In my test setup for oVirt 3.1, I have 3 switches -- two basic ones with no VLAN support for mgmt, and storage, and a building switch with VLAN support. The network operations team has configured a trunk with 2 dual 1 Gb links on the building switch. If I configure the two network interfaces in oVirt with binding mode 4, and assign a logical network to the link without specifying a VLAN, it works fine. I'm told the default untagged VLAN is 494 (which is what I want). On the other hand, if I simply hard-code VLAN 494 in the logical network setup, it doesn't work - I get no network traffic. I'm told that the switch is setup correctly, and the problem is on my side. How can I debug?<br>
><br>
> Thanks,<br>
><br>
> Jason.<br>
></p>
<p dir="ltr">That sounds normal to me. Traffic coming in on the native untagged VLAN wouldn't appear on the VLAN interface. I have a similar set up, and I've assigned an unused VLAN as the native VLAN on the trunk, added the VLANs I care about to the allowed VLANs list, and created the appropriate tagged logical networks.</p>
<p dir="ltr">Hope this helps,</p>
<p dir="ltr">Martin<br>
</p>