<div dir="ltr">Hi,<div><br></div><div>Can Any body help me on this ??</div></div><div class="gmail_extra"><br><div class="gmail_quote">On Thu, Nov 27, 2014 at 9:29 AM, Punit Dambiwal <span dir="ltr"><<a href="mailto:hypunit@gmail.com" target="_blank">hypunit@gmail.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="ltr">Hi Kaushal,<div><br></div><div>Thanks for the detailed reply....let me explain my setup first :- </div><div><br></div><div>1. Ovirt Engine</div><div>2. 4* host as well as storage machine (Host and gluster combined)</div><div>3. Every host has 24 bricks...</div><div><br></div><div>Now whenever the host machine reboot...it can come up but can not join the cluster again and through the following error "Gluster command [<UNKNOWN>] failed on server.."</div><div><br></div><div>Please check my comment in line :- </div><span class=""><div><br></div><div><span style="font-family:arial,sans-serif;font-size:13px">1. Use the same string for doing the peer probe and for the brick </span><span style="font-family:arial,sans-serif;font-size:13px">address during volume create/add-brick. Ideally, we suggest you use </span><span style="font-family:arial,sans-serif;font-size:13px">properly resolvable FQDNs everywhere. If that is not possible, then </span><span style="font-family:arial,sans-serif;font-size:13px">use only IP addresses. Try to avoid short names.</span></div></span><div>---------------</div><div><div>[root@cpu05 ~]# gluster peer status</div><div>Number of Peers: 3</div><div><br></div><div>Hostname: <a href="http://cpu03.stack.com" target="_blank">cpu03.stack.com</a></div><div>Uuid: 5729b8c4-e80d-4353-b456-6f467bddbdfb</div><div>State: Peer in Cluster (Connected)</div><div><br></div><div>Hostname: <a href="http://cpu04.stack.com" target="_blank">cpu04.stack.com</a></div><div>Uuid: d272b790-c4b2-4bed-ba68-793656e6d7b0</div><div>State: Peer in Cluster (Connected)</div><div>Other names:</div><div>10.10.0.8</div><div><br></div><div>Hostname: <a href="http://cpu02.stack.com" target="_blank">cpu02.stack.com</a></div><div>Uuid: 8d8a7041-950e-40d0-85f9-58d14340ca25</div><div>State: Peer in Cluster (Connected)</div><div>[root@cpu05 ~]#</div></div><div>----------------</div><span class=""><div><span style="font-family:arial,sans-serif;font-size:13px">2. During boot up, make sure to launch glusterd only after the network </span><span style="font-family:arial,sans-serif;font-size:13px">is up. This will allow the new peer identification mechanism to do its</span><br style="font-family:arial,sans-serif;font-size:13px"><span style="font-family:arial,sans-serif;font-size:13px">job correctly.</span><br></div></span><div><span style="font-family:arial,sans-serif;font-size:13px">>> I think the service itself doing the same job....</span></div><div><div><br></div><div>[root@cpu05 ~]# cat /usr/lib/systemd/system/glusterd.service</div><div>[Unit]</div><div>Description=GlusterFS, a clustered file-system server</div><div>After=network.target rpcbind.service</div><div>Before=network-online.target</div><div><br></div><div>[Service]</div><div>Type=forking</div><div>PIDFile=/var/run/glusterd.pid</div><div>LimitNOFILE=65536</div><div>ExecStart=/usr/sbin/glusterd -p /var/run/glusterd.pid</div><div>KillMode=process</div><div><br></div><div>[Install]</div><div>WantedBy=multi-user.target</div><div>[root@cpu05 ~]#</div></div><div>--------------------</div><div><br></div><div>gluster logs :- </div><div><br></div><div><div>[2014-11-24 09:22:22.147471] I [MSGID: 100030] [glusterfsd.c:2018:main] 0-/usr/sbin/glusterd: Started running /usr/sbin/glusterd version 3.6.1 (args: /usr/sbin/glusterd -p /var/run/glusterd.pid)</div><div>[2014-11-24 09:22:22.151565] I [glusterd.c:1214:init] 0-management: Maximum allowed open file descriptors set to 65536</div><div>[2014-11-24 09:22:22.151599] I [glusterd.c:1259:init] 0-management: Using /var/lib/glusterd as working directory</div><div>[2014-11-24 09:22:22.155216] W [rdma.c:4195:__gf_rdma_ctx_create] 0-rpc-transport/rdma: rdma_cm event channel creation failed (No such device)</div><div>[2014-11-24 09:22:22.155264] E [rdma.c:4483:init] 0-rdma.management: Failed to initialize IB Device</div><div>[2014-11-24 09:22:22.155285] E [rpc-transport.c:333:rpc_transport_load] 0-rpc-transport: 'rdma' initialization failed</div><div>[2014-11-24 09:22:22.155354] W [rpcsvc.c:1524:rpcsvc_transport_create] 0-rpc-service: cannot create listener, initing the transport failed</div><div>[2014-11-24 09:22:22.156290] I [glusterd.c:413:glusterd_check_gsync_present] 0-glusterd: geo-replication module not installed in the system</div><div>[2014-11-24 09:22:22.161318] I [glusterd-store.c:2043:glusterd_restore_op_version] 0-glusterd: retrieved op-version: 30600</div><div>[2014-11-24 09:22:22.821800] I [glusterd-handler.c:3146:glusterd_friend_add_from_peerinfo] 0-management: connect returned 0</div><div>[2014-11-24 09:22:22.825810] I [glusterd-handler.c:3146:glusterd_friend_add_from_peerinfo] 0-management: connect returned 0</div><div>[2014-11-24 09:22:22.828705] I [glusterd-handler.c:3146:glusterd_friend_add_from_peerinfo] 0-management: connect returned 0</div><div>[2014-11-24 09:22:22.828771] I [rpc-clnt.c:969:rpc_clnt_connection_init] 0-management: setting frame-timeout to 600</div><div>[2014-11-24 09:22:22.832670] I [rpc-clnt.c:969:rpc_clnt_connection_init] 0-management: setting frame-timeout to 600</div><div>[2014-11-24 09:22:22.835919] I [rpc-clnt.c:969:rpc_clnt_connection_init] 0-management: setting frame-timeout to 600</div><div>[2014-11-24 09:22:22.840209] E [glusterd-store.c:4248:glusterd_resolve_all_bricks] 0-glusterd: resolve brick failed in restore</div><div>[2014-11-24 09:22:22.840233] E [xlator.c:425:xlator_init] 0-management: Initialization of volume 'management' failed, review your volfile again</div><div>[2014-11-24 09:22:22.840245] E [graph.c:322:glusterfs_graph_init] 0-management: initializing translator failed</div><div>[2014-11-24 09:22:22.840264] E [graph.c:525:glusterfs_graph_activate] 0-graph: init failed</div><div>[2014-11-24 09:22:22.840754] W [glusterfsd.c:1194:cleanup_and_exit] (--> 0-: received signum (0), shutting down</div></div><div><br></div><div>Thanks,</div><div>Punit</div><div><br></div><div><br></div><div><br></div></div><div class="HOEnZb"><div class="h5"><div class="gmail_extra"><br><div class="gmail_quote">On Wed, Nov 26, 2014 at 7:14 PM, Kaushal M <span dir="ltr"><<a href="mailto:kshlmster@gmail.com" target="_blank">kshlmster@gmail.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">Based on the logs I can guess that glusterd is being started before<br>
the network has come up and that the addresses given to bricks do not<br>
directly match the addresses used in during peer probe.<br>
<br>
The gluster_after_reboot log has the line "[2014-11-25<br>
06:46:09.972113] E [glusterd-store.c:2632:glusterd_resolve_all_bricks]<br>
0-glusterd: resolve brick failed in restore".<br>
<br>
Brick resolution fails when glusterd cannot match the address for the<br>
brick, with one of the peers. Brick resolution happens in two phases,<br>
1. We first try to identify the peer by performing string comparisions<br>
with the brick address and the peer addresses (The peer names will be<br>
the names/addresses that were given when the peer was probed).<br>
2. If we don't find a match from step 1, we will then resolve all the<br>
brick address and the peer addresses into addrinfo structs, and then<br>
compare these structs to find a match. This process should generally<br>
find a match if available. This will fail only if the network is not<br>
up yet as we cannot resolve addresses.<br>
<br>
The above steps are applicable only to glusterfs versions >=3.6. They<br>
were introduced to reduce problems with peer identification, like the<br>
one you encountered<br>
<br>
Since both of the steps failed to find a match in one run, but<br>
succeeded later, we can come to the conclusion that,<br>
a) the bricks don't have the exact same string used in peer probe for<br>
their addresses as step 1 failed, and<br>
b) the network was not up in the initial run, as step 2 failed during<br>
the initial run, but passed in the second run.<br>
<br>
Please let me know if my conclusion is correct.<br>
<br>
If it is, you can solve your problem in two ways.<br>
1. Use the same string for doing the peer probe and for the brick<br>
address during volume create/add-brick. Ideally, we suggest you use<br>
properly resolvable FQDNs everywhere. If that is not possible, then<br>
use only IP addresses. Try to avoid short names.<br>
2. During boot up, make sure to launch glusterd only after the network<br>
is up. This will allow the new peer identification mechanism to do its<br>
job correctly.<br>
<br>
<br>
If you have already followed these steps and yet still hit the<br>
problem, then please provide more information (setup, logs, etc.). It<br>
could be much different problem that you are facing.<br>
<br>
~kaushal<br>
<div><div><br>
On Wed, Nov 26, 2014 at 4:01 PM, Punit Dambiwal <<a href="mailto:hypunit@gmail.com" target="_blank">hypunit@gmail.com</a>> wrote:<br>
> Is there any one can help on this ??<br>
><br>
> Thanks,<br>
> punit<br>
><br>
> On Wed, Nov 26, 2014 at 9:42 AM, Punit Dambiwal <<a href="mailto:hypunit@gmail.com" target="_blank">hypunit@gmail.com</a>> wrote:<br>
>><br>
>> Hi,<br>
>><br>
>> My Glusterfs version is :- glusterfs-3.6.1-1.el7<br>
>><br>
>> On Wed, Nov 26, 2014 at 1:59 AM, Kanagaraj Mayilsamy <<a href="mailto:kmayilsa@redhat.com" target="_blank">kmayilsa@redhat.com</a>><br>
>> wrote:<br>
>>><br>
>>> [+<a href="mailto:Gluster-users@gluster.org" target="_blank">Gluster-users@gluster.org</a>]<br>
>>><br>
>>> "Initialization of volume 'management' failed, review your volfile<br>
>>> again", glusterd throws this error when the service is started automatically<br>
>>> after the reboot. But the service is successfully started later manually by<br>
>>> the user.<br>
>>><br>
>>> can somebody from gluster-users please help on this?<br>
>>><br>
>>> glusterfs version: 3.5.1<br>
>>><br>
>>> Thanks,<br>
>>> Kanagaraj<br>
>>><br>
>>> ----- Original Message -----<br>
>>> > From: "Punit Dambiwal" <<a href="mailto:hypunit@gmail.com" target="_blank">hypunit@gmail.com</a>><br>
>>> > To: "Kanagaraj" <<a href="mailto:kmayilsa@redhat.com" target="_blank">kmayilsa@redhat.com</a>><br>
>>> > Cc: <a href="mailto:users@ovirt.org" target="_blank">users@ovirt.org</a><br>
>>> > Sent: Tuesday, November 25, 2014 7:24:45 PM<br>
>>> > Subject: Re: [ovirt-users] Gluster command [<UNKNOWN>] failed on<br>
>>> > server...<br>
>>> ><br>
>>> > Hi Kanagraj,<br>
>>> ><br>
>>> > Please check the attached log files....i didn't find any thing<br>
>>> > special....<br>
>>> ><br>
>>> > On Tue, Nov 25, 2014 at 12:12 PM, Kanagaraj <<a href="mailto:kmayilsa@redhat.com" target="_blank">kmayilsa@redhat.com</a>><br>
>>> > wrote:<br>
>>> ><br>
>>> > > Do you see any errors in<br>
>>> > > /var/log/glusterfs/etc-glusterfs-glusterd.vol.log or vdsm.log when<br>
>>> > > the<br>
>>> > > service is trying to start automatically after the reboot?<br>
>>> > ><br>
>>> > > Thanks,<br>
>>> > > Kanagaraj<br>
>>> > ><br>
>>> > ><br>
>>> > > On 11/24/2014 08:13 PM, Punit Dambiwal wrote:<br>
>>> > ><br>
>>> > > Hi Kanagaraj,<br>
>>> > ><br>
>>> > > Yes...once i will start the gluster service and then vdsmd ...the<br>
>>> > > host<br>
>>> > > can connect to cluster...but the question is why it's not started<br>
>>> > > even it<br>
>>> > > has chkconfig enabled...<br>
>>> > ><br>
>>> > > I have tested it in two host cluster environment...(Centos 6.6 and<br>
>>> > > centos 7.0) on both hypervisior cluster..it's failed to reconnect in<br>
>>> > > to<br>
>>> > > cluster after reboot....<br>
>>> > ><br>
>>> > > In both the environment glusterd enabled for next boot....but it's<br>
>>> > > failed with the same error....seems it's bug in either gluster or<br>
>>> > > Ovirt ??<br>
>>> > ><br>
>>> > > Please help me to find the workaround here if can not resolve<br>
>>> > > it...as<br>
>>> > > without this the Host machine can not connect after reboot....that<br>
>>> > > means<br>
>>> > > engine will consider it as down and every time need to manually start<br>
>>> > > the<br>
>>> > > gluster service and vdsmd... ??<br>
>>> > ><br>
>>> > > Thanks,<br>
>>> > > Punit<br>
>>> > ><br>
>>> > > On Mon, Nov 24, 2014 at 10:20 PM, Kanagaraj <<a href="mailto:kmayilsa@redhat.com" target="_blank">kmayilsa@redhat.com</a>><br>
>>> > > wrote:<br>
>>> > ><br>
>>> > >> From vdsm.log "error: Connection failed. Please check if gluster<br>
>>> > >> daemon<br>
>>> > >> is operational."<br>
>>> > >><br>
>>> > >> Starting glusterd service should fix this issue. 'service glusterd<br>
>>> > >> start'<br>
>>> > >> But i am wondering why the glusterd was not started automatically<br>
>>> > >> after<br>
>>> > >> the reboot.<br>
>>> > >><br>
>>> > >> Thanks,<br>
>>> > >> Kanagaraj<br>
>>> > >><br>
>>> > >><br>
>>> > >><br>
>>> > >> On 11/24/2014 07:18 PM, Punit Dambiwal wrote:<br>
>>> > >><br>
>>> > >> Hi Kanagaraj,<br>
>>> > >><br>
>>> > >> Please find the attached VDSM logs :-<br>
>>> > >><br>
>>> > >> ----------------<br>
>>> > >> Thread-13::DEBUG::2014-11-24<br>
>>> > >><br>
>>> > >> 21:41:17,182::resourceManager::977::Storage.ResourceManager.Owner::(cancelAll)<br>
>>> > >> Owner.cancelAll requests {}<br>
>>> > >> Thread-13::DEBUG::2014-11-24<br>
>>> > >> 21:41:17,182::task::993::Storage.TaskManager.Task::(_decref)<br>
>>> > >> Task=`1691d409-9b27-4585-8281-5ec26154367a`::ref 0 aborting False<br>
>>> > >> Thread-13::DEBUG::2014-11-24<br>
>>> > >> 21:41:32,393::task::595::Storage.TaskManager.Task::(_updateState)<br>
>>> > >> Task=`994c7bc3-a236-4d03-a732-e068c7ed9ed4`::moving from state init<br>
>>> > >> -><br>
>>> > >> state preparing<br>
>>> > >> Thread-13::INFO::2014-11-24<br>
>>> > >> 21:41:32,393::logUtils::44::dispatcher::(wrapper) Run and protect:<br>
>>> > >> repoStats(options=None)<br>
>>> > >> Thread-13::INFO::2014-11-24<br>
>>> > >> 21:41:32,393::logUtils::47::dispatcher::(wrapper) Run and protect:<br>
>>> > >> repoStats, Return response: {}<br>
>>> > >> Thread-13::DEBUG::2014-11-24<br>
>>> > >> 21:41:32,393::task::1191::Storage.TaskManager.Task::(prepare)<br>
>>> > >> Task=`994c7bc3-a236-4d03-a732-e068c7ed9ed4`::finished: {}<br>
>>> > >> Thread-13::DEBUG::2014-11-24<br>
>>> > >> 21:41:32,394::task::595::Storage.TaskManager.Task::(_updateState)<br>
>>> > >> Task=`994c7bc3-a236-4d03-a732-e068c7ed9ed4`::moving from state<br>
>>> > >> preparing<br>
>>> > >> -><br>
>>> > >> state finished<br>
>>> > >> Thread-13::DEBUG::2014-11-24<br>
>>> > >><br>
>>> > >> 21:41:32,394::resourceManager::940::Storage.ResourceManager.Owner::(releaseAll)<br>
>>> > >> Owner.releaseAll requests {} resources {}<br>
>>> > >> Thread-13::DEBUG::2014-11-24<br>
>>> > >><br>
>>> > >> 21:41:32,394::resourceManager::977::Storage.ResourceManager.Owner::(cancelAll)<br>
>>> > >> Owner.cancelAll requests {}<br>
>>> > >> Thread-13::DEBUG::2014-11-24<br>
>>> > >> 21:41:32,394::task::993::Storage.TaskManager.Task::(_decref)<br>
>>> > >> Task=`994c7bc3-a236-4d03-a732-e068c7ed9ed4`::ref 0 aborting False<br>
>>> > >> Thread-13::DEBUG::2014-11-24<br>
>>> > >> 21:41:41,550::BindingXMLRPC::1132::vds::(wrapper) client<br>
>>> > >> [10.10.10.2]::call<br>
>>> > >> getCapabilities with () {}<br>
>>> > >> Thread-13::DEBUG::2014-11-24<br>
>>> > >> 21:41:41,553::utils::738::root::(execCmd)<br>
>>> > >> /sbin/ip route show to <a href="http://0.0.0.0/0" target="_blank">0.0.0.0/0</a> table all (cwd None)<br>
>>> > >> Thread-13::DEBUG::2014-11-24<br>
>>> > >> 21:41:41,560::utils::758::root::(execCmd)<br>
>>> > >> SUCCESS: <err> = ''; <rc> = 0<br>
>>> > >> Thread-13::DEBUG::2014-11-24<br>
>>> > >> 21:41:41,588::caps::728::root::(_getKeyPackages) rpm package<br>
>>> > >> ('gluster-swift',) not found<br>
>>> > >> Thread-13::DEBUG::2014-11-24<br>
>>> > >> 21:41:41,592::caps::728::root::(_getKeyPackages) rpm package<br>
>>> > >> ('gluster-swift-object',) not found<br>
>>> > >> Thread-13::DEBUG::2014-11-24<br>
>>> > >> 21:41:41,593::caps::728::root::(_getKeyPackages) rpm package<br>
>>> > >> ('gluster-swift-plugin',) not found<br>
>>> > >> Thread-13::DEBUG::2014-11-24<br>
>>> > >> 21:41:41,598::caps::728::root::(_getKeyPackages) rpm package<br>
>>> > >> ('gluster-swift-account',) not found<br>
>>> > >> Thread-13::DEBUG::2014-11-24<br>
>>> > >> 21:41:41,598::caps::728::root::(_getKeyPackages) rpm package<br>
>>> > >> ('gluster-swift-proxy',) not found<br>
>>> > >> Thread-13::DEBUG::2014-11-24<br>
>>> > >> 21:41:41,598::caps::728::root::(_getKeyPackages) rpm package<br>
>>> > >> ('gluster-swift-doc',) not found<br>
>>> > >> Thread-13::DEBUG::2014-11-24<br>
>>> > >> 21:41:41,599::caps::728::root::(_getKeyPackages) rpm package<br>
>>> > >> ('gluster-swift-container',) not found<br>
>>> > >> Thread-13::DEBUG::2014-11-24<br>
>>> > >> 21:41:41,599::caps::728::root::(_getKeyPackages) rpm package<br>
>>> > >> ('glusterfs-geo-replication',) not found<br>
>>> > >> Thread-13::DEBUG::2014-11-24 21:41:41,600::caps::646::root::(get)<br>
>>> > >> VirtioRNG DISABLED: libvirt version 0.10.2-29.el6_5.9 required >=<br>
>>> > >> 0.10.2-31<br>
>>> > >> Thread-13::DEBUG::2014-11-24<br>
>>> > >> 21:41:41,603::BindingXMLRPC::1139::vds::(wrapper) return<br>
>>> > >> getCapabilities<br>
>>> > >> with {'status': {'message': 'Done', 'code': 0}, 'info':<br>
>>> > >> {'HBAInventory':<br>
>>> > >> {'iSCSI': [{'InitiatorName':<br>
>>> > >> 'iqn.1994-05.com.redhat:32151ce183c8'}],<br>
>>> > >> 'FC':<br>
>>> > >> []}, 'packages2': {'kernel': {'release': '431.el6.x86_64',<br>
>>> > >> 'buildtime':<br>
>>> > >> 1385061309.0, 'version': '2.6.32'}, 'glusterfs-rdma': {'release':<br>
>>> > >> '1.el6',<br>
>>> > >> 'buildtime': 1403622628L, 'version': '3.5.1'}, 'glusterfs-fuse':<br>
>>> > >> {'release': '1.el6', 'buildtime': 1403622628L, 'version': '3.5.1'},<br>
>>> > >> 'spice-server': {'release': '6.el6_5.2', 'buildtime': 1402324637L,<br>
>>> > >> 'version': '0.12.4'}, 'vdsm': {'release': '1.gitdb83943.el6',<br>
>>> > >> 'buildtime':<br>
>>> > >> 1412784567L, 'version': '4.16.7'}, 'qemu-kvm': {'release':<br>
>>> > >> '2.415.el6_5.10', 'buildtime': 1402435700L, 'version': '0.12.1.2'},<br>
>>> > >> 'qemu-img': {'release': '2.415.el6_5.10', 'buildtime': 1402435700L,<br>
>>> > >> 'version': '0.12.1.2'}, 'libvirt': {'release': '29.el6_5.9',<br>
>>> > >> 'buildtime':<br>
>>> > >> 1402404612L, 'version': '0.10.2'}, 'glusterfs': {'release': '1.el6',<br>
>>> > >> 'buildtime': 1403622628L, 'version': '3.5.1'}, 'mom': {'release':<br>
>>> > >> '2.el6',<br>
>>> > >> 'buildtime': 1403794344L, 'version': '0.4.1'}, 'glusterfs-server':<br>
>>> > >> {'release': '1.el6', 'buildtime': 1403622628L, 'version': '3.5.1'}},<br>
>>> > >> 'numaNodeDistance': {'1': [20, 10], '0': [10, 20]}, 'cpuModel':<br>
>>> > >> 'Intel(R)<br>
>>> > >> Xeon(R) CPU X5650 @ 2.67GHz', 'liveMerge': 'false',<br>
>>> > >> 'hooks':<br>
>>> > >> {},<br>
>>> > >> 'cpuSockets': '2', 'vmTypes': ['kvm'], 'selinux': {'mode': '1'},<br>
>>> > >> 'kdumpStatus': 0, 'supportedProtocols': ['2.2', '2.3'], 'networks':<br>
>>> > >> {'ovirtmgmt': {'iface': u'bond0.10', 'addr': '43.252.176.16',<br>
>>> > >> 'bridged':<br>
>>> > >> False, 'ipv6addrs': ['fe80::62eb:69ff:fe20:b46c/64'], 'mtu': '1500',<br>
>>> > >> 'bootproto4': 'none', 'netmask': '255.255.255.0', 'ipv4addrs': ['<br>
>>> > >> <a href="http://43.252.176.16/24" target="_blank">43.252.176.16/24</a>' <<a href="http://43.252.176.16/24%27" target="_blank">http://43.252.176.16/24%27</a>>], 'interface':<br>
>>> > >> u'bond0.10', 'ipv6gateway': '::', 'gateway': '43.25.17.1'},<br>
>>> > >> 'Internal':<br>
>>> > >> {'iface': 'Internal', 'addr': '', 'cfg': {'DEFROUTE': 'no',<br>
>>> > >> 'HOTPLUG':<br>
>>> > >> 'no', 'MTU': '9000', 'DELAY': '0', 'NM_CONTROLLED': 'no',<br>
>>> > >> 'BOOTPROTO':<br>
>>> > >> 'none', 'STP': 'off', 'DEVICE': 'Internal', 'TYPE': 'Bridge',<br>
>>> > >> 'ONBOOT':<br>
>>> > >> 'no'}, 'bridged': True, 'ipv6addrs':<br>
>>> > >> ['fe80::210:18ff:fecd:daac/64'],<br>
>>> > >> 'gateway': '', 'bootproto4': 'none', 'netmask': '', 'stp': 'off',<br>
>>> > >> 'ipv4addrs': [], 'mtu': '9000', 'ipv6gateway': '::', 'ports':<br>
>>> > >> ['bond1.100']}, 'storage': {'iface': u'bond1', 'addr': '10.10.10.6',<br>
>>> > >> 'bridged': False, 'ipv6addrs': ['fe80::210:18ff:fecd:daac/64'],<br>
>>> > >> 'mtu':<br>
>>> > >> '9000', 'bootproto4': 'none', 'netmask': '255.255.255.0',<br>
>>> > >> 'ipv4addrs': ['<br>
>>> > >> <a href="http://10.10.10.6/24" target="_blank">10.10.10.6/24</a>' <<a href="http://10.10.10.6/24%27" target="_blank">http://10.10.10.6/24%27</a>>], 'interface': u'bond1',<br>
>>> > >> 'ipv6gateway': '::', 'gateway': ''}, 'VMNetwork': {'iface':<br>
>>> > >> 'VMNetwork',<br>
>>> > >> 'addr': '', 'cfg': {'DEFROUTE': 'no', 'HOTPLUG': 'no', 'MTU':<br>
>>> > >> '1500',<br>
>>> > >> 'DELAY': '0', 'NM_CONTROLLED': 'no', 'BOOTPROTO': 'none', 'STP':<br>
>>> > >> 'off',<br>
>>> > >> 'DEVICE': 'VMNetwork', 'TYPE': 'Bridge', 'ONBOOT': 'no'}, 'bridged':<br>
>>> > >> True,<br>
>>> > >> 'ipv6addrs': ['fe80::62eb:69ff:fe20:b46c/64'], 'gateway': '',<br>
>>> > >> 'bootproto4':<br>
>>> > >> 'none', 'netmask': '', 'stp': 'off', 'ipv4addrs': [], 'mtu': '1500',<br>
>>> > >> 'ipv6gateway': '::', 'ports': ['bond0.36']}}, 'bridges':<br>
>>> > >> {'Internal':<br>
>>> > >> {'addr': '', 'cfg': {'DEFROUTE': 'no', 'HOTPLUG': 'no', 'MTU':<br>
>>> > >> '9000',<br>
>>> > >> 'DELAY': '0', 'NM_CONTROLLED': 'no', 'BOOTPROTO': 'none', 'STP':<br>
>>> > >> 'off',<br>
>>> > >> 'DEVICE': 'Internal', 'TYPE': 'Bridge', 'ONBOOT': 'no'},<br>
>>> > >> 'ipv6addrs':<br>
>>> > >> ['fe80::210:18ff:fecd:daac/64'], 'mtu': '9000', 'netmask': '',<br>
>>> > >> 'stp':<br>
>>> > >> 'off', 'ipv4addrs': [], 'ipv6gateway': '::', 'gateway': '', 'opts':<br>
>>> > >> {'topology_change_detected': '0', 'multicast_last_member_count':<br>
>>> > >> '2',<br>
>>> > >> 'hash_elasticity': '4', 'multicast_query_response_interval': '999',<br>
>>> > >> 'multicast_snooping': '1', 'multicast_startup_query_interval':<br>
>>> > >> '3124',<br>
>>> > >> 'hello_timer': '31', 'multicast_querier_interval': '25496',<br>
>>> > >> 'max_age':<br>
>>> > >> '1999', 'hash_max': '512', 'stp_state': '0', 'root_id':<br>
>>> > >> '8000.001018cddaac', 'priority': '32768',<br>
>>> > >> 'multicast_membership_interval':<br>
>>> > >> '25996', 'root_path_cost': '0', 'root_port': '0',<br>
>>> > >> 'multicast_querier':<br>
>>> > >> '0',<br>
>>> > >> 'multicast_startup_query_count': '2', 'hello_time': '199',<br>
>>> > >> 'topology_change': '0', 'bridge_id': '8000.001018cddaac',<br>
>>> > >> 'topology_change_timer': '0', 'ageing_time': '29995', 'gc_timer':<br>
>>> > >> '31',<br>
>>> > >> 'group_addr': '1:80:c2:0:0:0', 'tcn_timer': '0',<br>
>>> > >> 'multicast_query_interval': '12498',<br>
>>> > >> 'multicast_last_member_interval':<br>
>>> > >> '99', 'multicast_router': '1', 'forward_delay': '0'}, 'ports':<br>
>>> > >> ['bond1.100']}, 'VMNetwork': {'addr': '', 'cfg': {'DEFROUTE': 'no',<br>
>>> > >> 'HOTPLUG': 'no', 'MTU': '1500', 'DELAY': '0', 'NM_CONTROLLED': 'no',<br>
>>> > >> 'BOOTPROTO': 'none', 'STP': 'off', 'DEVICE': 'VMNetwork', 'TYPE':<br>
>>> > >> 'Bridge',<br>
>>> > >> 'ONBOOT': 'no'}, 'ipv6addrs': ['fe80::62eb:69ff:fe20:b46c/64'],<br>
>>> > >> 'mtu':<br>
>>> > >> '1500', 'netmask': '', 'stp': 'off', 'ipv4addrs': [], 'ipv6gateway':<br>
>>> > >> '::',<br>
>>> > >> 'gateway': '', 'opts': {'topology_change_detected': '0',<br>
>>> > >> 'multicast_last_member_count': '2', 'hash_elasticity': '4',<br>
>>> > >> 'multicast_query_response_interval': '999', 'multicast_snooping':<br>
>>> > >> '1',<br>
>>> > >> 'multicast_startup_query_interval': '3124', 'hello_timer': '131',<br>
>>> > >> 'multicast_querier_interval': '25496', 'max_age': '1999',<br>
>>> > >> 'hash_max':<br>
>>> > >> '512', 'stp_state': '0', 'root_id': '8000.60eb6920b46c', 'priority':<br>
>>> > >> '32768', 'multicast_membership_interval': '25996', 'root_path_cost':<br>
>>> > >> '0',<br>
>>> > >> 'root_port': '0', 'multicast_querier': '0',<br>
>>> > >> 'multicast_startup_query_count': '2', 'hello_time': '199',<br>
>>> > >> 'topology_change': '0', 'bridge_id': '8000.60eb6920b46c',<br>
>>> > >> 'topology_change_timer': '0', 'ageing_time': '29995', 'gc_timer':<br>
>>> > >> '31',<br>
>>> > >> 'group_addr': '1:80:c2:0:0:0', 'tcn_timer': '0',<br>
>>> > >> 'multicast_query_interval': '12498',<br>
>>> > >> 'multicast_last_member_interval':<br>
>>> > >> '99', 'multicast_router': '1', 'forward_delay': '0'}, 'ports':<br>
>>> > >> ['bond0.36']}}, 'uuid': '44454C4C-4C00-1057-8053-B7C04F504E31',<br>
>>> > >> 'lastClientIface': 'bond1', 'nics': {'eth3': {'permhwaddr':<br>
>>> > >> '00:10:18:cd:da:ae', 'addr': '', 'cfg': {'SLAVE': 'yes',<br>
>>> > >> 'NM_CONTROLLED':<br>
>>> > >> 'no', 'MTU': '9000', 'HWADDR': '00:10:18:cd:da:ae', 'MASTER':<br>
>>> > >> 'bond1',<br>
>>> > >> 'DEVICE': 'eth3', 'ONBOOT': 'no'}, 'ipv6addrs': [], 'mtu': '9000',<br>
>>> > >> 'netmask': '', 'ipv4addrs': [], 'hwaddr': '00:10:18:cd:da:ac',<br>
>>> > >> 'speed':<br>
>>> > >> 1000}, 'eth2': {'permhwaddr': '00:10:18:cd:da:ac', 'addr': '',<br>
>>> > >> 'cfg':<br>
>>> > >> {'SLAVE': 'yes', 'NM_CONTROLLED': 'no', 'MTU': '9000', 'HWADDR':<br>
>>> > >> '00:10:18:cd:da:ac', 'MASTER': 'bond1', 'DEVICE': 'eth2', 'ONBOOT':<br>
>>> > >> 'no'},<br>
>>> > >> 'ipv6addrs': [], 'mtu': '9000', 'netmask': '', 'ipv4addrs': [],<br>
>>> > >> 'hwaddr':<br>
>>> > >> '00:10:18:cd:da:ac', 'speed': 1000}, 'eth1': {'permhwaddr':<br>
>>> > >> '60:eb:69:20:b4:6d', 'addr': '', 'cfg': {'SLAVE': 'yes',<br>
>>> > >> 'NM_CONTROLLED':<br>
>>> > >> 'no', 'MTU': '1500', 'HWADDR': '60:eb:69:20:b4:6d', 'MASTER':<br>
>>> > >> 'bond0',<br>
>>> > >> 'DEVICE': 'eth1', 'ONBOOT': 'yes'}, 'ipv6addrs': [], 'mtu': '1500',<br>
>>> > >> 'netmask': '', 'ipv4addrs': [], 'hwaddr': '60:eb:69:20:b4:6c',<br>
>>> > >> 'speed':<br>
>>> > >> 1000}, 'eth0': {'permhwaddr': '60:eb:69:20:b4:6c', 'addr': '',<br>
>>> > >> 'cfg':<br>
>>> > >> {'SLAVE': 'yes', 'NM_CONTROLLED': 'no', 'MTU': '1500', 'HWADDR':<br>
>>> > >> '60:eb:69:20:b4:6c', 'MASTER': 'bond0', 'DEVICE': 'eth0', 'ONBOOT':<br>
>>> > >> 'yes'},<br>
>>> > >> 'ipv6addrs': [], 'mtu': '1500', 'netmask': '', 'ipv4addrs': [],<br>
>>> > >> 'hwaddr':<br>
>>> > >> '60:eb:69:20:b4:6c', 'speed': 1000}}, 'software_revision': '1',<br>
>>> > >> 'clusterLevels': ['3.0', '3.1', '3.2', '3.3', '3.4', '3.5'],<br>
>>> > >> 'cpuFlags':<br>
>>> > >><br>
>>> > >> u'fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,pdpe1gb,rdtscp,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,xtopology,nonstop_tsc,pni,pclmulqdq,dtes64,monitor,ds_cpl,vmx,smx,est,tm2,ssse3,cx16,xtpr,pdcm,pcid,dca,sse4_1,sse4_2,popcnt,aes,lahf_lm,tpr_shadow,vnmi,flexpriority,ept,vpid,model_Nehalem,model_Conroe,model_coreduo,model_core2duo,model_Penryn,model_Westmere,model_n270',<br>
>>> > >> 'ISCSIInitiatorName': 'iqn.1994-05.com.redhat:32151ce183c8',<br>
>>> > >> 'netConfigDirty': 'False', 'supportedENGINEs': ['3.0', '3.1', '3.2',<br>
>>> > >> '3.3',<br>
>>> > >> '3.4', '3.5'], 'autoNumaBalancing': 2, 'reservedMem': '321',<br>
>>> > >> 'bondings':<br>
>>> > >> {'bond4': {'addr': '', 'cfg': {}, 'mtu': '1500', 'netmask': '',<br>
>>> > >> 'slaves':<br>
>>> > >> [], 'hwaddr': '00:00:00:00:00:00'}, 'bond0': {'addr': '', 'cfg':<br>
>>> > >> {'HOTPLUG': 'no', 'MTU': '1500', 'NM_CONTROLLED': 'no',<br>
>>> > >> 'BONDING_OPTS':<br>
>>> > >> 'mode=4 miimon=100', 'DEVICE': 'bond0', 'ONBOOT': 'yes'},<br>
>>> > >> 'ipv6addrs':<br>
>>> > >> ['fe80::62eb:69ff:fe20:b46c/64'], 'mtu': '1500', 'netmask': '',<br>
>>> > >> 'ipv4addrs': [], 'hwaddr': '60:eb:69:20:b4:6c', 'slaves': ['eth0',<br>
>>> > >> 'eth1'],<br>
>>> > >> 'opts': {'miimon': '100', 'mode': '4'}}, 'bond1': {'addr':<br>
>>> > >> '10.10.10.6',<br>
>>> > >> 'cfg': {'DEFROUTE': 'no', 'IPADDR': '10.10.10.6', 'HOTPLUG': 'no',<br>
>>> > >> 'MTU':<br>
>>> > >> '9000', 'NM_CONTROLLED': 'no', 'NETMASK': '255.255.255.0',<br>
>>> > >> 'BOOTPROTO':<br>
>>> > >> 'none', 'BONDING_OPTS': 'mode=4 miimon=100', 'DEVICE': 'bond1',<br>
>>> > >> 'ONBOOT':<br>
>>> > >> 'no'}, 'ipv6addrs': ['fe80::210:18ff:fecd:daac/64'], 'mtu': '9000',<br>
>>> > >> 'netmask': '255.255.255.0', 'ipv4addrs': ['<a href="http://10.10.10.6/24" target="_blank">10.10.10.6/24</a>'<br>
>>> > >> <<a href="http://10.10.10.6/24%27" target="_blank">http://10.10.10.6/24%27</a>>], 'hwaddr': '00:10:18:cd:da:ac', 'slaves':<br>
>>> > >> ['eth2', 'eth3'], 'opts': {'miimon': '100', 'mode': '4'}}, 'bond2':<br>
>>> > >> {'addr': '', 'cfg': {}, 'mtu': '1500', 'netmask': '', 'slaves': [],<br>
>>> > >> 'hwaddr': '00:00:00:00:00:00'}, 'bond3': {'addr': '', 'cfg': {},<br>
>>> > >> 'mtu':<br>
>>> > >> '1500', 'netmask': '', 'slaves': [], 'hwaddr':<br>
>>> > >> '00:00:00:00:00:00'}},<br>
>>> > >> 'software_version': '4.16', 'memSize': '24019', 'cpuSpeed':<br>
>>> > >> '2667.000',<br>
>>> > >> 'numaNodes': {u'1': {'totalMemory': '12288', 'cpus': [6, 7, 8, 9,<br>
>>> > >> 10, 11,<br>
>>> > >> 18, 19, 20, 21, 22, 23]}, u'0': {'totalMemory': '12278', 'cpus': [0,<br>
>>> > >> 1, 2,<br>
>>> > >> 3, 4, 5, 12, 13, 14, 15, 16, 17]}}, 'version_name': 'Snow Man',<br>
>>> > >> 'vlans':<br>
>>> > >> {'bond0.10': {'iface': 'bond0', 'addr': '43.25.17.16', 'cfg':<br>
>>> > >> {'DEFROUTE':<br>
>>> > >> 'yes', 'VLAN': 'yes', 'IPADDR': '43.25.17.16', 'HOTPLUG': 'no',<br>
>>> > >> 'GATEWAY':<br>
>>> > >> '43.25.17.1', 'NM_CONTROLLED': 'no', 'NETMASK': '255.255.255.0',<br>
>>> > >> 'BOOTPROTO': 'none', 'DEVICE': 'bond0.10', 'MTU': '1500', 'ONBOOT':<br>
>>> > >> 'yes'},<br>
>>> > >> 'ipv6addrs': ['fe80::62eb:69ff:fe20:b46c/64'], 'vlanid': 10, 'mtu':<br>
>>> > >> '1500',<br>
>>> > >> 'netmask': '255.255.255.0', 'ipv4addrs': ['<a href="http://43.25.17.16/24" target="_blank">43.25.17.16/24</a>']<br>
>>> > >> <<a href="http://43.25.17.16/24%27%5D" target="_blank">http://43.25.17.16/24%27%5D</a>>}, 'bond0.36': {'iface': 'bond0',<br>
>>> > >> 'addr':<br>
>>> > >> '', 'cfg': {'BRIDGE': 'VMNetwork', 'VLAN': 'yes', 'HOTPLUG': 'no',<br>
>>> > >> 'MTU':<br>
>>> > >> '1500', 'NM_CONTROLLED': 'no', 'DEVICE': 'bond0.36', 'ONBOOT':<br>
>>> > >> 'no'},<br>
>>> > >> 'ipv6addrs': ['fe80::62eb:69ff:fe20:b46c/64'], 'vlanid': 36, 'mtu':<br>
>>> > >> '1500',<br>
>>> > >> 'netmask': '', 'ipv4addrs': []}, 'bond1.100': {'iface': 'bond1',<br>
>>> > >> 'addr':<br>
>>> > >> '', 'cfg': {'BRIDGE': 'Internal', 'VLAN': 'yes', 'HOTPLUG': 'no',<br>
>>> > >> 'MTU':<br>
>>> > >> '9000', 'NM_CONTROLLED': 'no', 'DEVICE': 'bond1.100', 'ONBOOT':<br>
>>> > >> 'no'},<br>
>>> > >> 'ipv6addrs': ['fe80::210:18ff:fecd:daac/64'], 'vlanid': 100, 'mtu':<br>
>>> > >> '9000',<br>
>>> > >> 'netmask': '', 'ipv4addrs': []}}, 'cpuCores': '12', 'kvmEnabled':<br>
>>> > >> 'true',<br>
>>> > >> 'guestOverhead': '65', 'cpuThreads': '24', 'emulatedMachines':<br>
>>> > >> [u'rhel6.5.0', u'pc', u'rhel6.4.0', u'rhel6.3.0', u'rhel6.2.0',<br>
>>> > >> u'rhel6.1.0', u'rhel6.0.0', u'rhel5.5.0', u'rhel5.4.4',<br>
>>> > >> u'rhel5.4.0'],<br>
>>> > >> 'operatingSystem': {'release': '5.el6.centos.11.1', 'version': '6',<br>
>>> > >> 'name':<br>
>>> > >> 'RHEL'}, 'lastClient': '10.10.10.2'}}<br>
>>> > >> Thread-13::DEBUG::2014-11-24<br>
>>> > >> 21:41:41,620::BindingXMLRPC::1132::vds::(wrapper) client<br>
>>> > >> [10.10.10.2]::call<br>
>>> > >> getHardwareInfo with () {}<br>
>>> > >> Thread-13::DEBUG::2014-11-24<br>
>>> > >> 21:41:41,621::BindingXMLRPC::1139::vds::(wrapper) return<br>
>>> > >> getHardwareInfo<br>
>>> > >> with {'status': {'message': 'Done', 'code': 0}, 'info':<br>
>>> > >> {'systemProductName': 'CS24-TY', 'systemSerialNumber': '7LWSPN1',<br>
>>> > >> 'systemFamily': 'Server', 'systemVersion': 'A00', 'systemUUID':<br>
>>> > >> '44454c4c-4c00-1057-8053-b7c04f504e31', 'systemManufacturer':<br>
>>> > >> 'Dell'}}<br>
>>> > >> Thread-13::DEBUG::2014-11-24<br>
>>> > >> 21:41:41,733::BindingXMLRPC::1132::vds::(wrapper) client<br>
>>> > >> [10.10.10.2]::call<br>
>>> > >> hostsList with () {} flowID [222e8036]<br>
>>> > >> Thread-13::ERROR::2014-11-24<br>
>>> > >> 21:41:44,753::BindingXMLRPC::1148::vds::(wrapper) vdsm exception<br>
>>> > >> occured<br>
>>> > >> Traceback (most recent call last):<br>
>>> > >> File "/usr/share/vdsm/rpc/BindingXMLRPC.py", line 1135, in wrapper<br>
>>> > >> res = f(*args, **kwargs)<br>
>>> > >> File "/usr/share/vdsm/gluster/api.py", line 54, in wrapper<br>
>>> > >> rv = func(*args, **kwargs)<br>
>>> > >> File "/usr/share/vdsm/gluster/api.py", line 251, in hostsList<br>
>>> > >> return {'hosts': self.svdsmProxy.glusterPeerStatus()}<br>
>>> > >> File "/usr/share/vdsm/supervdsm.py", line 50, in __call__<br>
>>> > >> return callMethod()<br>
>>> > >> File "/usr/share/vdsm/supervdsm.py", line 48, in <lambda><br>
>>> > >> **kwargs)<br>
>>> > >> File "<string>", line 2, in glusterPeerStatus<br>
>>> > >> File "/usr/lib64/python2.6/multiprocessing/managers.py", line 740,<br>
>>> > >> in<br>
>>> > >> _callmethod<br>
>>> > >> raise convert_to_error(kind, result)<br>
>>> > >> GlusterCmdExecFailedException: Command execution failed<br>
>>> > >> error: Connection failed. Please check if gluster daemon is<br>
>>> > >> operational.<br>
>>> > >> return code: 1<br>
>>> > >> Thread-13::DEBUG::2014-11-24<br>
>>> > >> 21:41:50,949::task::595::Storage.TaskManager.Task::(_updateState)<br>
>>> > >> Task=`c9042986-c978-4b08-adb2-616f5299e115`::moving from state init<br>
>>> > >> -><br>
>>> > >> state preparing<br>
>>> > >> Thread-13::INFO::2014-11-24<br>
>>> > >> 21:41:50,950::logUtils::44::dispatcher::(wrapper) Run and protect:<br>
>>> > >> repoStats(options=None)<br>
>>> > >> Thread-13::INFO::2014-11-24<br>
>>> > >> 21:41:50,950::logUtils::47::dispatcher::(wrapper) Run and protect:<br>
>>> > >> repoStats, Return response: {}<br>
>>> > >> Thread-13::DEBUG::2014-11-24<br>
>>> > >> 21:41:50,950::task::1191::Storage.TaskManager.Task::(prepare)<br>
>>> > >> Task=`c9042986-c978-4b08-adb2-616f5299e115`::finished: {}<br>
>>> > >> Thread-13::DEBUG::2014-11-24<br>
>>> > >> 21:41:50,950::task::595::Storage.TaskManager.Task::(_updateState)<br>
>>> > >> Task=`c9042986-c978-4b08-adb2-616f5299e115`::moving from state<br>
>>> > >> preparing<br>
>>> > >> -><br>
>>> > >> state finished<br>
>>> > >> Thread-13::DEBUG::2014-11-24<br>
>>> > >><br>
>>> > >> 21:41:50,951::resourceManager::940::Storage.ResourceManager.Owner::(releaseAll)<br>
>>> > >> Owner.releaseAll requests {} resources {}<br>
>>> > >> Thread-13::DEBUG::2014-11-24<br>
>>> > >><br>
>>> > >> 21:41:50,951::resourceManager::977::Storage.ResourceManager.Owner::(cancelAll)<br>
>>> > >> Owner.cancelAll requests {}<br>
>>> > >> Thread-13::DEBUG::2014-11-24<br>
>>> > >> 21:41:50,951::task::993::Storage.TaskManager.Task::(_decref)<br>
>>> > >> Task=`c9042986-c978-4b08-adb2-616f5299e115`::ref 0 aborting False<br>
>>> > >> -------------------------------<br>
>>> > >><br>
>>> > >> [root@compute4 ~]# service glusterd status<br>
>>> > >> glusterd is stopped<br>
>>> > >> [root@compute4 ~]# chkconfig --list | grep glusterd<br>
>>> > >> glusterd 0:off 1:off 2:on 3:on 4:on 5:on<br>
>>> > >> 6:off<br>
>>> > >> [root@compute4 ~]#<br>
>>> > >><br>
>>> > >> Thanks,<br>
>>> > >> Punit<br>
>>> > >><br>
>>> > >> On Mon, Nov 24, 2014 at 6:36 PM, Kanagaraj <<a href="mailto:kmayilsa@redhat.com" target="_blank">kmayilsa@redhat.com</a>><br>
>>> > >> wrote:<br>
>>> > >><br>
>>> > >>> Can you send the corresponding error in vdsm.log from the host?<br>
>>> > >>><br>
>>> > >>> Also check if glusterd service is running.<br>
>>> > >>><br>
>>> > >>> Thanks,<br>
>>> > >>> Kanagaraj<br>
>>> > >>><br>
>>> > >>><br>
>>> > >>> On 11/24/2014 03:39 PM, Punit Dambiwal wrote:<br>
>>> > >>><br>
>>> > >>> Hi,<br>
>>> > >>><br>
>>> > >>> After reboot my Hypervisior host can not activate again in the<br>
>>> > >>> cluster<br>
>>> > >>> and failed with the following error :-<br>
>>> > >>><br>
>>> > >>> Gluster command [<UNKNOWN>] failed on server...<br>
>>> > >>><br>
>>> > >>> Engine logs :-<br>
>>> > >>><br>
>>> > >>> 2014-11-24 18:05:28,397 INFO<br>
>>> > >>><br>
>>> > >>> [org.ovirt.engine.core.vdsbroker.gluster.GlusterVolumesListVDSCommand]<br>
>>> > >>> (DefaultQuartzScheduler_Worker-64) START,<br>
>>> > >>> GlusterVolumesListVDSCommand(HostName = Compute4, HostId =<br>
>>> > >>> 33648a90-200c-45ca-89d5-1ce305d79a6a), log id: 5f251c90<br>
>>> > >>> 2014-11-24 18:05:30,609 INFO<br>
>>> > >>><br>
>>> > >>> [org.ovirt.engine.core.vdsbroker.gluster.GlusterVolumesListVDSCommand]<br>
>>> > >>> (DefaultQuartzScheduler_Worker-64) FINISH,<br>
>>> > >>> GlusterVolumesListVDSCommand,<br>
>>> > >>> return:<br>
>>> > >>><br>
>>> > >>> {26ae1672-ee09-4a38-8fd2-72dd9974cc2b=org.ovirt.engine.core.common.businessentities.gluster.GlusterVolumeEntity@d95203e0},<br>
>>> > >>> log id: 5f251c90<br>
>>> > >>> 2014-11-24 18:05:33,768 INFO<br>
>>> > >>> [org.ovirt.engine.core.bll.ActivateVdsCommand]<br>
>>> > >>> (ajp--127.0.0.1-8702-8)<br>
>>> > >>> [287d570d] Lock Acquired to object EngineLock [exclusiveLocks= key:<br>
>>> > >>> 0bf6b00f-7947-4411-b55a-cc5eea2b381a value: VDS<br>
>>> > >>> , sharedLocks= ]<br>
>>> > >>> 2014-11-24 18:05:33,795 INFO<br>
>>> > >>> [org.ovirt.engine.core.bll.ActivateVdsCommand]<br>
>>> > >>> (org.ovirt.thread.pool-8-thread-45) [287d570d] Running command:<br>
>>> > >>> ActivateVdsCommand internal: false. Entities affected : ID:<br>
>>> > >>> 0bf6b00f-7947-4411-b55a-cc5eea2b381a Type: VDSAction group<br>
>>> > >>> MANIPULATE_HOST<br>
>>> > >>> with role type ADMIN<br>
>>> > >>> 2014-11-24 18:05:33,796 INFO<br>
>>> > >>> [org.ovirt.engine.core.bll.ActivateVdsCommand]<br>
>>> > >>> (org.ovirt.thread.pool-8-thread-45) [287d570d] Before acquiring<br>
>>> > >>> lock in<br>
>>> > >>> order to prevent monitoring for host Compute5 from data-center<br>
>>> > >>> SV_WTC<br>
>>> > >>> 2014-11-24 18:05:33,797 INFO<br>
>>> > >>> [org.ovirt.engine.core.bll.ActivateVdsCommand]<br>
>>> > >>> (org.ovirt.thread.pool-8-thread-45) [287d570d] Lock acquired, from<br>
>>> > >>> now a<br>
>>> > >>> monitoring of host will be skipped for host Compute5 from<br>
>>> > >>> data-center<br>
>>> > >>> SV_WTC<br>
>>> > >>> 2014-11-24 18:05:33,817 INFO<br>
>>> > >>> [org.ovirt.engine.core.vdsbroker.SetVdsStatusVDSCommand]<br>
>>> > >>> (org.ovirt.thread.pool-8-thread-45) [287d570d] START,<br>
>>> > >>> SetVdsStatusVDSCommand(HostName = Compute5, HostId =<br>
>>> > >>> 0bf6b00f-7947-4411-b55a-cc5eea2b381a, status=Unassigned,<br>
>>> > >>> nonOperationalReason=NONE, stopSpmFailureLogged=false), log id:<br>
>>> > >>> 1cbc7311<br>
>>> > >>> 2014-11-24 18:05:33,820 INFO<br>
>>> > >>> [org.ovirt.engine.core.vdsbroker.SetVdsStatusVDSCommand]<br>
>>> > >>> (org.ovirt.thread.pool-8-thread-45) [287d570d] FINISH,<br>
>>> > >>> SetVdsStatusVDSCommand, log id: 1cbc7311<br>
>>> > >>> 2014-11-24 18:05:34,086 INFO<br>
>>> > >>> [org.ovirt.engine.core.bll.ActivateVdsCommand]<br>
>>> > >>> (org.ovirt.thread.pool-8-thread-45) Activate finished. Lock<br>
>>> > >>> released.<br>
>>> > >>> Monitoring can run now for host Compute5 from data-center SV_WTC<br>
>>> > >>> 2014-11-24 18:05:34,088 INFO<br>
>>> > >>><br>
>>> > >>> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]<br>
>>> > >>> (org.ovirt.thread.pool-8-thread-45) Correlation ID: 287d570d, Job<br>
>>> > >>> ID:<br>
>>> > >>> 5ef8e4d6-b2bc-469e-8e81-7ef74b2a001a, Call Stack: null, Custom<br>
>>> > >>> Event ID:<br>
>>> > >>> -1, Message: Host Compute5 was activated by admin.<br>
>>> > >>> 2014-11-24 18:05:34,090 INFO<br>
>>> > >>> [org.ovirt.engine.core.bll.ActivateVdsCommand]<br>
>>> > >>> (org.ovirt.thread.pool-8-thread-45) Lock freed to object EngineLock<br>
>>> > >>> [exclusiveLocks= key: 0bf6b00f-7947-4411-b55a-cc5eea2b381a value:<br>
>>> > >>> VDS<br>
>>> > >>> , sharedLocks= ]<br>
>>> > >>> 2014-11-24 18:05:35,792 INFO<br>
>>> > >>><br>
>>> > >>> [org.ovirt.engine.core.vdsbroker.gluster.GlusterVolumesListVDSCommand]<br>
>>> > >>> (DefaultQuartzScheduler_Worker-55) [3706e836] START,<br>
>>> > >>> GlusterVolumesListVDSCommand(HostName = Compute4, HostId =<br>
>>> > >>> 33648a90-200c-45ca-89d5-1ce305d79a6a), log id: 48a0c832<br>
>>> > >>> 2014-11-24 18:05:37,064 INFO<br>
>>> > >>><br>
>>> > >>> [org.ovirt.engine.core.vdsbroker.vdsbroker.GetHardwareInfoVDSCommand]<br>
>>> > >>> (DefaultQuartzScheduler_Worker-69) START,<br>
>>> > >>> GetHardwareInfoVDSCommand(HostName = Compute5, HostId =<br>
>>> > >>> 0bf6b00f-7947-4411-b55a-cc5eea2b381a,<br>
>>> > >>> vds=Host[Compute5,0bf6b00f-7947-4411-b55a-cc5eea2b381a]), log id:<br>
>>> > >>> 6d560cc2<br>
>>> > >>> 2014-11-24 18:05:37,074 INFO<br>
>>> > >>><br>
>>> > >>> [org.ovirt.engine.core.vdsbroker.vdsbroker.GetHardwareInfoVDSCommand]<br>
>>> > >>> (DefaultQuartzScheduler_Worker-69) FINISH,<br>
>>> > >>> GetHardwareInfoVDSCommand, log<br>
>>> > >>> id: 6d560cc2<br>
>>> > >>> 2014-11-24 18:05:37,093 WARN<br>
>>> > >>> [org.ovirt.engine.core.vdsbroker.VdsManager]<br>
>>> > >>> (DefaultQuartzScheduler_Worker-69) Host Compute5 is running with<br>
>>> > >>> disabled<br>
>>> > >>> SELinux.<br>
>>> > >>> 2014-11-24 18:05:37,127 INFO<br>
>>> > >>><br>
>>> > >>> [org.ovirt.engine.core.bll.HandleVdsCpuFlagsOrClusterChangedCommand]<br>
>>> > >>> (DefaultQuartzScheduler_Worker-69) [2b4a51cf] Running command:<br>
>>> > >>> HandleVdsCpuFlagsOrClusterChangedCommand internal: true. Entities<br>
>>> > >>> affected<br>
>>> > >>> : ID: 0bf6b00f-7947-4411-b55a-cc5eea2b381a Type: VDS<br>
>>> > >>> 2014-11-24 18:05:37,147 INFO<br>
>>> > >>><br>
>>> > >>> [org.ovirt.engine.core.vdsbroker.gluster.GlusterServersListVDSCommand]<br>
>>> > >>> (DefaultQuartzScheduler_Worker-69) [2b4a51cf] START,<br>
>>> > >>> GlusterServersListVDSCommand(HostName = Compute5, HostId =<br>
>>> > >>> 0bf6b00f-7947-4411-b55a-cc5eea2b381a), log id: 4faed87<br>
>>> > >>> 2014-11-24 18:05:37,164 INFO<br>
>>> > >>><br>
>>> > >>> [org.ovirt.engine.core.vdsbroker.gluster.GlusterServersListVDSCommand]<br>
>>> > >>> (DefaultQuartzScheduler_Worker-69) [2b4a51cf] FINISH,<br>
>>> > >>> GlusterServersListVDSCommand, log id: 4faed87<br>
>>> > >>> 2014-11-24 18:05:37,189 INFO<br>
>>> > >>> [org.ovirt.engine.core.bll.SetNonOperationalVdsCommand]<br>
>>> > >>> (DefaultQuartzScheduler_Worker-69) [4a84c4e5] Running command:<br>
>>> > >>> SetNonOperationalVdsCommand internal: true. Entities affected :<br>
>>> > >>> ID:<br>
>>> > >>> 0bf6b00f-7947-4411-b55a-cc5eea2b381a Type: VDS<br>
>>> > >>> 2014-11-24 18:05:37,206 INFO<br>
>>> > >>> [org.ovirt.engine.core.vdsbroker.SetVdsStatusVDSCommand]<br>
>>> > >>> (DefaultQuartzScheduler_Worker-69) [4a84c4e5] START,<br>
>>> > >>> SetVdsStatusVDSCommand(HostName = Compute5, HostId =<br>
>>> > >>> 0bf6b00f-7947-4411-b55a-cc5eea2b381a, status=NonOperational,<br>
>>> > >>> nonOperationalReason=GLUSTER_COMMAND_FAILED,<br>
>>> > >>> stopSpmFailureLogged=false),<br>
>>> > >>> log id: fed5617<br>
>>> > >>> 2014-11-24 18:05:37,209 INFO<br>
>>> > >>> [org.ovirt.engine.core.vdsbroker.SetVdsStatusVDSCommand]<br>
>>> > >>> (DefaultQuartzScheduler_Worker-69) [4a84c4e5] FINISH,<br>
>>> > >>> SetVdsStatusVDSCommand, log id: fed5617<br>
>>> > >>> 2014-11-24 18:05:37,223 ERROR<br>
>>> > >>><br>
>>> > >>> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]<br>
>>> > >>> (DefaultQuartzScheduler_Worker-69) [4a84c4e5] Correlation ID:<br>
>>> > >>> 4a84c4e5,<br>
>>> > >>> Job<br>
>>> > >>> ID: 4bfd4a6d-c3ef-468f-a40e-a3a6ca13011b, Call Stack: null, Custom<br>
>>> > >>> Event<br>
>>> > >>> ID: -1, Message: Gluster command [<UNKNOWN>] failed on server<br>
>>> > >>> Compute5.<br>
>>> > >>> 2014-11-24 18:05:37,243 INFO<br>
>>> > >>><br>
>>> > >>> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]<br>
>>> > >>> (DefaultQuartzScheduler_Worker-69) [4a84c4e5] Correlation ID: null,<br>
>>> > >>> Call<br>
>>> > >>> Stack: null, Custom Event ID: -1, Message: Status of host Compute5<br>
>>> > >>> was<br>
>>> > >>> set<br>
>>> > >>> to NonOperational.<br>
>>> > >>> 2014-11-24 18:05:37,272 INFO<br>
>>> > >>> [org.ovirt.engine.core.bll.HandleVdsVersionCommand]<br>
>>> > >>> (DefaultQuartzScheduler_Worker-69) [a0c8a7f] Running command:<br>
>>> > >>> HandleVdsVersionCommand internal: true. Entities affected : ID:<br>
>>> > >>> 0bf6b00f-7947-4411-b55a-cc5eea2b381a Type: VDS<br>
>>> > >>> 2014-11-24 18:05:37,274 INFO<br>
>>> > >>> [org.ovirt.engine.core.vdsbroker.VdsUpdateRunTimeInfo]<br>
>>> > >>> (DefaultQuartzScheduler_Worker-69) [a0c8a7f] Host<br>
>>> > >>> 0bf6b00f-7947-4411-b55a-cc5eea2b381a : Compute5 is already in<br>
>>> > >>> NonOperational status for reason GLUSTER_COMMAND_FAILED.<br>
>>> > >>> SetNonOperationalVds command is skipped.<br>
>>> > >>> 2014-11-24 18:05:38,065 INFO<br>
>>> > >>><br>
>>> > >>> [org.ovirt.engine.core.vdsbroker.gluster.GlusterVolumesListVDSCommand]<br>
>>> > >>> (DefaultQuartzScheduler_Worker-55) [3706e836] FINISH,<br>
>>> > >>> GlusterVolumesListVDSCommand, return:<br>
>>> > >>><br>
>>> > >>> {26ae1672-ee09-4a38-8fd2-72dd9974cc2b=org.ovirt.engine.core.common.businessentities.gluster.GlusterVolumeEntity@4e72a1b1},<br>
>>> > >>> log id: 48a0c832<br>
>>> > >>> 2014-11-24 18:05:43,243 INFO<br>
>>> > >>><br>
>>> > >>> [org.ovirt.engine.core.vdsbroker.gluster.GlusterVolumesListVDSCommand]<br>
>>> > >>> (DefaultQuartzScheduler_Worker-35) START,<br>
>>> > >>> GlusterVolumesListVDSCommand(HostName = Compute4, HostId =<br>
>>> > >>> 33648a90-200c-45ca-89d5-1ce305d79a6a), log id: 3ce13ebc<br>
>>> > >>> ^C<br>
>>> > >>> [root@ccr01 ~]#<br>
>>> > >>><br>
>>> > >>> Thanks,<br>
>>> > >>> Punit<br>
>>> > >>><br>
>>> > >>><br>
>>> > >>> _______________________________________________<br>
>>> > >>> Users mailing<br>
>>> > >>> listUsers@ovirt.orghttp://<a href="http://lists.ovirt.org/mailman/listinfo/users" target="_blank">lists.ovirt.org/mailman/listinfo/users</a><br>
>>> > >>><br>
>>> > >>><br>
>>> > >>><br>
>>> > >><br>
>>> > >><br>
>>> > ><br>
>>> > ><br>
>>> ><br>
>><br>
>><br>
><br>
><br>
</div></div>> _______________________________________________<br>
> Gluster-users mailing list<br>
> <a href="mailto:Gluster-users@gluster.org" target="_blank">Gluster-users@gluster.org</a><br>
> <a href="http://supercolony.gluster.org/mailman/listinfo/gluster-users" target="_blank">http://supercolony.gluster.org/mailman/listinfo/gluster-users</a><br>
</blockquote></div><br></div>
</div></div></blockquote></div><br></div>