<html>
<head>
<meta content="text/html; charset=windows-1252"
http-equiv="Content-Type">
</head>
<body bgcolor="#FFFFFF" text="#000000">
<p>I created a new VM in the ui and assigned it to host h1. In
/var/log/ovirt-provider-ovn.log I get the following:</p>
<p>2017-01-06 20:54:11,940 Request: GET : /v2.0/ports<br>
2017-01-06 20:54:11,940 Connecting to remote ovn database:
tcp:127.0.0.1:6641<br>
2017-01-06 20:54:12,157 Connected (number of retries: 2)<br>
2017-01-06 20:54:12,158 Response code: 200<br>
2017-01-06 20:54:12,158 Response body: {"ports": [{"name":
"4981ee5f-6e15-4bd5-a1cf-7ead9bdd5873", "network_id":
"e53554cf-e553-40a1-8d22-9c8d95ec0601", "device_owner": "oVirt",
"mac_address": "00:1a:4a:16:01:51", "id":
"4981ee5f-6e15-4bd5-a1cf-7ead9bdd5873", "device_id":
"40cd7328-d575-4c3d-b656-9ef9bacc0078"}, {"name":
"92f6d3c8-68b3-4986-9c09-60bee04644b5", "network_id":
"e53554cf-e553-40a1-8d22-9c8d95ec0601", "device_owner": "oVirt",
"mac_address": "00:1a:4a:16:01:52", "id":
"92f6d3c8-68b3-4986-9c09-60bee04644b5", "device_id":
"4baefa8c-3822-4de0-9cd0-1d025bab7844"}]}<br>
2017-01-06 20:54:12,160 Request: SHOW :
/v2.0/networks/e53554cf-e553-40a1-8d22-9c8d95ec0601<br>
2017-01-06 20:54:12,160 Connecting to remote ovn database:
tcp:127.0.0.1:6641<br>
2017-01-06 20:54:12,377 Connected (number of retries: 2)<br>
2017-01-06 20:54:12,378 Response code: 200<br>
2017-01-06 20:54:12,378 Response body: {"network": {"id":
"e53554cf-e553-40a1-8d22-9c8d95ec0601", "name": "ovirtbridge"}}<br>
2017-01-06 20:54:12,380 Request: POST : /v2.0/ports<br>
2017-01-06 20:54:12,380 Request body:<br>
{<br>
"port" : {<br>
"name" : "nic1",<br>
"binding:host_id" : "h1.limetransit.com",<br>
"admin_state_up" : true,<br>
"device_id" : "e8553a88-05f0-401d-8b9b-5fff77f7bbbe",<br>
"device_owner" : "oVirt",<br>
"mac_address" : "00:1a:4a:16:01:54",<br>
"network_id" : "e53554cf-e553-40a1-8d22-9c8d95ec0601"<br>
}<br>
}<br>
2017-01-06 20:54:12,380 Connecting to remote ovn database:
tcp:127.0.0.1:6641<br>
2017-01-06 20:54:12,610 Connected (number of retries: 2)<br>
2017-01-06 20:54:12,614 Response code: 200<br>
2017-01-06 20:54:12,614 Response body: {"port": {"name":
"912cba79-982e-4a87-868e-241fedccb59a", "network_id":
"e53554cf-e553-40a1-8d22-9c8d95ec0601", "device_owner": "oVirt",
"mac_address": "00:1a:4a:16:01:54", "id":
"912cba79-982e-4a87-868e-241fedccb59a", "device_id":
"e8553a88-05f0-401d-8b9b-5fff77f7bbbe"}}<br>
</p>
<p>h1:/var/log/messages<br>
Jan 6 20:54:12 h1 ovs-vsctl: ovs|00001|vsctl|INFO|Called as
ovs-vsctl --timeout=5 -- --if-exists del-port vnet1 -- add-port
br-int vnet1 -- set Interface vnet1
"external-ids:attached-mac=\"00:1a:4a:16:01:54\"" -- set Interface
vnet1
"external-ids:iface-id=\"20388407-0f76-41d8-97aa-8e2b5978f908\""
-- set Interface vnet1
"external-ids:vm-id=\"6dd5291e-6556-4d29-8b4e-ea896e627645\"" --
set Interface vnet1 external-ids:iface-status=active<br>
</p>
<p>[root@h2 ~]# ovn-nbctl show<br>
switch e53554cf-e553-40a1-8d22-9c8d95ec0601 (ovirtbridge)<br>
port 4981ee5f-6e15-4bd5-a1cf-7ead9bdd5873<br>
addresses: ["00:1a:4a:16:01:51"]<br>
port 912cba79-982e-4a87-868e-241fedccb59a<br>
addresses: ["00:1a:4a:16:01:54"]<br>
port 92f6d3c8-68b3-4986-9c09-60bee04644b5<br>
addresses: ["00:1a:4a:16:01:52"]<br>
port ovirtbridge-port2<br>
addresses: ["unknown"]<br>
port ovirtbridge-port1<br>
addresses: ["unknown"]<br>
[root@h2 ~]# ovn-sbctl show<br>
Chassis "6e4dd29f-7607-48d7-8e5a-eef4c6aeefb5"<br>
hostname: "h2.limetransit.com"<br>
Encap geneve<br>
ip: "148.251.126.50"<br>
options: {csum="true"}<br>
Port_Binding "4981ee5f-6e15-4bd5-a1cf-7ead9bdd5873"<br>
Port_Binding "ovirtbridge-port1"<br>
Chassis "4f10fb04-8fb2-48d7-8a3f-ea6444c02cf9"<br>
hostname: "h1.limetransit.com"<br>
Encap geneve<br>
ip: "144.76.84.73"<br>
options: {csum="true"}<br>
Port_Binding "ovirtbridge-port2"<br>
Port_Binding "92f6d3c8-68b3-4986-9c09-60bee04644b5"<br>
</p>
<p>I.e. same issue<br>
/Sverker<br>
</p>
<div class="moz-cite-prefix">Den 2017-01-06 kl. 20:49, skrev Sverker
Abrahamsson:<br>
</div>
<blockquote
cite="mid:7b785156-6154-389e-0fcf-03f9d3c920a2@abrahamsson.com"
type="cite">
<meta content="text/html; charset=windows-1252"
http-equiv="Content-Type">
<p>The port is created from Ovirt UI, the ovs-vsctl command below
is executed when VM is started. In
/var/log/ovirt-provider-ovn.log on h2 I get the following:<br>
</p>
<p>2017-01-06 20:19:25,452 Request: GET : /v2.0/ports<br>
2017-01-06 20:19:25,452 Connecting to remote ovn database:
tcp:127.0.0.1:6641<br>
2017-01-06 20:19:25,670 Connected (number of retries: 2)<br>
2017-01-06 20:19:25,670 Response code: 200<br>
2017-01-06 20:19:25,670 Response body: {"ports": [{"name":
"4981ee5f-6e15-4bd5-a1cf-7ead9bdd5873", "network_id":
"e53554cf-e553-40a1-8d22-9c8d95ec0601", "device_owner": "oVirt",
"mac_address": "00:1a:4a:16:01:51", "id":
"4981ee5f-6e15-4bd5-a1cf-7ead9bdd5873", "device_id":
"40cd7328-d575-4c3d-b656-9ef9bacc0078"}, {"name":
"92f6d3c8-68b3-4986-9c09-60bee04644b5", "network_id":
"e53554cf-e553-40a1-8d22-9c8d95ec0601", "device_owner": "oVirt",
"mac_address": "00:1a:4a:16:01:52", "id":
"92f6d3c8-68b3-4986-9c09-60bee04644b5", "device_id":
"4baefa8c-3822-4de0-9cd0-1d025bab7844"}]}<br>
2017-01-06 20:19:25,673 Request: PUT :
/v2.0/ports/92f6d3c8-68b3-4986-9c09-60bee04644b5<br>
2017-01-06 20:19:25,673 Request body:<br>
{<br>
"port" : {<br>
"binding:host_id" : "h1.limetransit.com",<br>
"security_groups" : null<br>
}<br>
}<br>
2017-01-06 20:19:25,673 Connecting to remote ovn database:
tcp:127.0.0.1:6641<br>
2017-01-06 20:19:25,890 Connected (number of retries: 2)<br>
2017-01-06 20:19:25,891 Response code: 200<br>
2017-01-06 20:19:25,891 Response body: {"port": {"name":
"92f6d3c8-68b3-4986-9c09-60bee04644b5", "network_id":
"e53554cf-e553-40a1-8d22-9c8d95ec0601", "device_owner": "oVirt",
"mac_address": "00:1a:4a:16:01:52", "id":
"92f6d3c8-68b3-4986-9c09-60bee04644b5", "device_id":
"4baefa8c-3822-4de0-9cd0-1d025bab7844"}}<br>
</p>
<p>In /var/log/messages on h1 I get the following:<br>
</p>
<p>Jan 6 20:18:56 h1 dbus-daemon: dbus[1339]: [system]
Successfully activated service 'org.freedesktop.problems'<br>
Jan 6 20:19:26 h1 ovs-vsctl: ovs|00001|vsctl|INFO|Called as
ovs-vsctl --timeout=5 -- --if-exists del-port vnet0 -- add-port
br-int vnet0 -- set Interface vnet0
"external-ids:attached-mac=\"00:1a:4a:16:01:52\"" -- set
Interface vnet0
"external-ids:iface-id=\"72dafda5-03c2-4bb6-bcb6-241fa5c0a1f3\""
-- set Interface vnet0
"external-ids:vm-id=\"4d0c134a-11a0-40f4-b2fb-c13c17c7251c\"" --
set Interface vnet0 external-ids:iface-status=active<br>
Jan 6 20:19:26 h1 kernel: device vnet0 entered promiscuous mode<br>
Jan 6 20:19:26 h1 avahi-daemon[1391]: Registering new address
record for fe80::fc1a:4aff:fe16:152 on vnet0.*.<br>
Jan 6 20:19:26 h1 systemd-machined: New machine
qemu-4-CentOS72.<br>
Jan 6 20:19:26 h1 systemd: Started Virtual Machine
qemu-4-CentOS72.<br>
Jan 6 20:19:26 h1 systemd: Starting Virtual Machine
qemu-4-CentOS72.<br>
<br>
</p>
[root@h2 ~]# ovn-nbctl show<br>
switch e53554cf-e553-40a1-8d22-9c8d95ec0601 (ovirtbridge)<br>
port 4981ee5f-6e15-4bd5-a1cf-7ead9bdd5873<br>
addresses: ["00:1a:4a:16:01:51"]<br>
port 92f6d3c8-68b3-4986-9c09-60bee04644b5<br>
addresses: ["00:1a:4a:16:01:52"]<br>
port ovirtbridge-port2<br>
addresses: ["unknown"]<br>
port ovirtbridge-port1<br>
addresses: ["unknown"]<br>
[root@h2 ~]# ovn-sbctl show<br>
Chassis "6e4dd29f-7607-48d7-8e5a-eef4c6aeefb5"<br>
hostname: "h2.limetransit.com"<br>
Encap geneve<br>
ip: "148.251.126.50"<br>
options: {csum="true"}<br>
Port_Binding "4981ee5f-6e15-4bd5-a1cf-7ead9bdd5873"<br>
Port_Binding "ovirtbridge-port1"<br>
Chassis "4f10fb04-8fb2-48d7-8a3f-ea6444c02cf9"<br>
hostname: "h1.limetransit.com"<br>
Encap geneve<br>
ip: "144.76.84.73"<br>
options: {csum="true"}<br>
Port_Binding "ovirtbridge-port2"<br>
<br>
I.e. the port is set up with the wrong ID and not attached to OVN.<br>
<br>
If I correct external-ids:iface-id like this:<br>
[root@h1 ~]# ovs-vsctl set Interface vnet0
"external-ids:iface-id=\"92f6d3c8-68b3-4986-9c09-60bee04644b5\""<br>
<br>
then sb is correct:<br>
[root@h2 ~]# ovn-sbctl show<br>
Chassis "6e4dd29f-7607-48d7-8e5a-eef4c6aeefb5"<br>
hostname: "h2.limetransit.com"<br>
Encap geneve<br>
ip: "148.251.126.50"<br>
options: {csum="true"}<br>
Port_Binding "4981ee5f-6e15-4bd5-a1cf-7ead9bdd5873"<br>
Port_Binding "ovirtbridge-port1"<br>
Chassis "4f10fb04-8fb2-48d7-8a3f-ea6444c02cf9"<br>
hostname: "h1.limetransit.com"<br>
Encap geneve<br>
ip: "144.76.84.73"<br>
options: {csum="true"}<br>
Port_Binding "ovirtbridge-port2"<br>
Port_Binding "92f6d3c8-68b3-4986-9c09-60bee04644b5"<br>
<br>
I don't know from where the ID
72dafda5-03c2-4bb6-bcb6-241fa5c0a1f3 comes from, doesn't show in
any log other than /var/log/messages.<br>
<br>
If I do the same exercise on the same host as engine is running on
then the port for the VM gets the right id and is working from
beginning.<br>
/Sverker<br>
<br>
<div class="moz-cite-prefix">Den 2017-01-03 kl. 10:23, skrev
Marcin Mirecki:<br>
</div>
<blockquote
cite="mid:1312574967.6272280.1483435399446.JavaMail.zimbra@redhat.com"
type="cite">
<pre wrap="">How did you create this port?
>From the oVirt engine UI?
The OVN provider creates the port when you add the port in the engine UI,
it is then plugged into the ovs bridge by the VIF driver.
Please attach /var/log/ovirt-provider-ovn.log
----- Original Message -----
</pre>
<blockquote type="cite">
<pre wrap="">From: "Sverker Abrahamsson" <a moz-do-not-send="true" class="moz-txt-link-rfc2396E" href="mailto:sverker@abrahamsson.com"><sverker@abrahamsson.com></a>
To: "Marcin Mirecki" <a moz-do-not-send="true" class="moz-txt-link-rfc2396E" href="mailto:mmirecki@redhat.com"><mmirecki@redhat.com></a>
Cc: "Ovirt Users" <a moz-do-not-send="true" class="moz-txt-link-rfc2396E" href="mailto:users@ovirt.org"><users@ovirt.org></a>
Sent: Tuesday, January 3, 2017 2:06:22 AM
Subject: Re: [ovirt-users] Issue with OVN/OVS and mandatory ovirtmgmt network
Found an issue with Ovirt - OVN integration.
Engine and OVN central db running on host h2. Created VM to run on host
h1, which is started. Ovn db state:
[root@h2 env3]# ovn-nbctl show
switch e53554cf-e553-40a1-8d22-9c8d95ec0601 (ovirtbridge)
port 4981ee5f-6e15-4bd5-a1cf-7ead9bdd5873
addresses: ["00:1a:4a:16:01:51"]
port 92f6d3c8-68b3-4986-9c09-60bee04644b5
addresses: ["00:1a:4a:16:01:52"]
port ovirtbridge-port2
addresses: ["unknown"]
port ovirtbridge-port1
addresses: ["unknown"]
[root@h2 env3]# ovn-sbctl show
Chassis "6e4dd29f-7607-48d7-8e5a-eef4c6aeefb5"
hostname: "h2.limetransit.com"
Encap geneve
ip: "148.251.126.50"
options: {csum="true"}
Port_Binding "4981ee5f-6e15-4bd5-a1cf-7ead9bdd5873"
Port_Binding "ovirtbridge-port1"
Chassis "4f10fb04-8fb2-48d7-8a3f-ea6444c02cf9"
hostname: "h1.limetransit.com"
Encap geneve
ip: "144.76.84.73"
options: {csum="true"}
Port_Binding "ovirtbridge-port2"
Port 92f6d3c8-68b3-4986-9c09-60bee04644b5 is for the new VM which is
started on h1, but it is not assigned to that chassis. The reason is
that on h1 the port on br-int is created like this:
ovs-vsctl --timeout=5 -- --if-exists del-port vnet0 -- add-port br-int
vnet0 -- set Interface vnet0
"external-ids:attached-mac=\"00:1a:4a:16:01:52\"" -- set Interface vnet0
"external-ids:iface-id=\"35bcbe31-2c7e-4d97-add9-ce150eeb2f11\"" -- set
Interface vnet0
"external-ids:vm-id=\"4d0c134a-11a0-40f4-b2fb-c13c17c7251c\"" -- set
Interface vnet0 external-ids:iface-status=active
I.e. the extrernal id of interface is wrong. When I manually change to
the right id like this the port works fine:
ovs-vsctl --timeout=5 -- --if-exists del-port vnet0 -- add-port br-int
vnet0 -- set Interface vnet0
"external-ids:attached-mac=\"00:1a:4a:16:01:52\"" -- set Interface vnet0
"external-ids:iface-id=\"92f6d3c8-68b3-4986-9c09-60bee04644b5\"" -- set
Interface vnet0
"external-ids:vm-id=\"4d0c134a-11a0-40f4-b2fb-c13c17c7251c\"" -- set
Interface vnet0 external-ids:iface-status=active
sb db after correcting the port:
Chassis "6e4dd29f-7607-48d7-8e5a-eef4c6aeefb5"
hostname: "h2.limetransit.com"
Encap geneve
ip: "148.251.126.50"
options: {csum="true"}
Port_Binding "4981ee5f-6e15-4bd5-a1cf-7ead9bdd5873"
Port_Binding "ovirtbridge-port1"
Chassis "4f10fb04-8fb2-48d7-8a3f-ea6444c02cf9"
hostname: "h1.limetransit.com"
Encap geneve
ip: "144.76.84.73"
options: {csum="true"}
Port_Binding "ovirtbridge-port2"
Port_Binding "92f6d3c8-68b3-4986-9c09-60bee04644b5"
I don't know from where the faulty id comes from, it's not in any logs.
In the domain xml as printed in vdsm.log the id is correct:
<interface type="bridge">
<mac address="00:1a:4a:16:01:52" />
<model type="virtio" />
<source bridge="br-int" />
<virtualport type="openvswitch" />
<link state="up" />
<boot order="2" />
<bandwidth />
<virtualport type="openvswitch">
<parameters
interfaceid="92f6d3c8-68b3-4986-9c09-60bee04644b5" />
</virtualport>
</interface>
Where is the ovs-vsctl command line built for this call?
/Sverker
Den 2017-01-02 kl. 13:40, skrev Sverker Abrahamsson:
</pre>
<blockquote type="cite">
<pre wrap="">Got it to work now by following the env8 example in OVN tutorial,
where a port is added with type l2gateway. Not sure how that is
different from the localnet variant, but didn't suceed in getting that
one working. Now I'm able to ping and telnet over the tunnel, but not
ssh even when the port is answering on telnet. Neither does nfs
traffic work even though mount did. Suspecting MTU issue. I did notice
that ovn-controller starts too early, before network interfaces are
established and hence can't reach the db. As these is a purely OVS/OVN
issue I'll ask about it on their mailing list.
Getting back to the original issue with Ovirt, I've now added the
second host h1 to ovirt-engine. Had to do the same as with h2 to
create a dummy ovirtmgmt network but configured access via the public
IP. My firewall settings was replaced with iptables config and
vdsm.conf was overwritten when engine was set up, so those had to be
manually restored. It would be preferable if it would be possible to
configure ovirt-engine that it does not "own" the host and instead
comply with the settings it has instead of enforcing it's own view..
Apart from that it seems the second host works, although I need to
resolve the traffic issue over the OVS tunnel.
/Sverker
Den 2017-01-02 kl. 01:13, skrev Sverker Abrahamsson:
</pre>
<blockquote type="cite">
<pre wrap="">1. That is not possible as ovirt (or vdsm) will rewrite the network
configuration to a non-working state. That is why I've set that if as
hidden to vdsm and is why I'm keen on getting OVS/OVN to work
2. I've been reading the doc for OVN and starting to connect the
dots, which is not trivial as it is complex. Some insights reached:
First step is the OVN database, installed by openvswitch-ovn-central,
which I currently have running on h2 host. The 'ovn-nbctl' and
'ovn-sbctl' commands are only possible to execute on a database node.
Two ip's are given to 'vdsm-tool ovn-config <ip to database> <tunnel
ip>' as arguments, where <ip to database> is how this OVN node
reaches the database and <tunnel ip> is the ip to which other OVN
nodes sets up a tunnel to this node. I.e. it is not for creating a
tunnel to the database which I thought first from the description in
blog post.
The tunnel between OVN nodes is of type geneve which is a UDP based
protocol but I have not been able to find anywhere which port is used
so that I can open it in firewalld. I have added OVN on another host,
called h1, and connected it to the db. I see there is traffic to the
db port, but I don't see any geneve traffic between the nodes.
Ovirt is now able to create it's vnet0 interface on the br-int ovs
bridge, but then I run into the next issue. How do I create a
connection from the logical switch to the physical host? I need that
to a) get a connection out to the internet through a masqueraded if
or ipv6 and b) be able to run a dhcp server to give ip's to the VM's.
/Sverker
Den 2016-12-30 kl. 18:05, skrev Marcin Mirecki:
</pre>
<blockquote type="cite">
<pre wrap="">1. Why not use your physical nic for ovirtmgmt then?
2. "ovn-nbctl ls-add" does not add a bridge, but a logical switch.
br-int is an internal OVN implementation detail, which the user
should not care about. What you see in the ovirt UI are logical
networks. They are implemented as OVN logical switches in case
of the OVN provider.
Please look at:
<a moz-do-not-send="true" class="moz-txt-link-freetext" href="http://www.ovirt.org/blog/2016/11/ovirt-provider-ovn/">http://www.ovirt.org/blog/2016/11/ovirt-provider-ovn/</a>
You can get the latest rpms from here:
<a moz-do-not-send="true" class="moz-txt-link-freetext" href="http://resources.ovirt.org/repos/ovirt/experimental/master/ovirt-provider-ovn_fc24_46/rpm/fc24/noarch/">http://resources.ovirt.org/repos/ovirt/experimental/master/ovirt-provider-ovn_fc24_46/rpm/fc24/noarch/</a>
----- Original Message -----
</pre>
<blockquote type="cite">
<pre wrap="">From: "Sverker Abrahamsson" <a moz-do-not-send="true" class="moz-txt-link-rfc2396E" href="mailto:sverker@abrahamsson.com"><sverker@abrahamsson.com></a>
To: "Marcin Mirecki" <a moz-do-not-send="true" class="moz-txt-link-rfc2396E" href="mailto:mmirecki@redhat.com"><mmirecki@redhat.com></a>
Cc: "Ovirt Users" <a moz-do-not-send="true" class="moz-txt-link-rfc2396E" href="mailto:users@ovirt.org"><users@ovirt.org></a>
Sent: Friday, December 30, 2016 4:25:58 PM
Subject: Re: [ovirt-users] Issue with OVN/OVS and mandatory
ovirtmgmt network
1. No, I did not want to put the ovirtmgmt bridge on my physical
nic as
it always messed up the network config making the host unreachable. I
have put a ovs bridge on this nic which I will use to make tunnels
when
I add other hosts. Maybe br-int will be used for that instead, will
see
when I get that far.
As it is now I have a dummy if for ovirtmgmt bridge but this will
probably not work when I add other hosts as that bridge cannot connect
to the other hosts. I'm considering keeping this just as a dummy to
keep
ovirt engine satisfied while the actual communication will happen over
OVN/OVS bridges and tunnels.
2. On
<a moz-do-not-send="true" class="moz-txt-link-freetext" href="https://www.ovirt.org//develop/release-management/features/ovirt-ovn-provider/">https://www.ovirt.org//develop/release-management/features/ovirt-ovn-provider/</a>
there is instructions how to add an OVS bridge to OVN with |ovn-nbctl
ls-add <network name>|. If you want to use br-int then it makes
sense to
make that bridge visible in ovirt webui under networks so that it
can be
selected for VM's.
It quite doesn't make sense to me that I can select other network
for my
VM but then that setting is not used when setting up the network.
/Sverker
Den 2016-12-30 kl. 15:34, skrev Marcin Mirecki:
</pre>
<blockquote type="cite">
<pre wrap="">Hi,
The OVN provider does not require you to add any bridges manually.
As I understand we were dealing with two problems:
1. You only had one physical nic and wanted to put a bridge on it,
attaching the management network to the bridge. This was the
reason for
creating the bridge (the recommended setup would be to used a
separate
physical nic for the management network). This bridge has
nothing to
do with the OVN bridge.
2. OVN - you want to use OVN on this system. For this you have to
install
OVN on your hosts. This should create the br-int bridge,
which are
then used by the OVN provider. This br-int bridge must be
configured
to connect to other hosts using the geneve tunnels.
In both cases the systems will not be aware of any bridges you
create.
They need a nic (be it physical or virtual) to connect to other
system.
Usually this is the physical nic. In your case you decided to put
a bridge
on the physical nic, and give oVirt a virtual nic attached to this
bridge.
This works, but keep in mind that the bridge you have introduced
is outside
of oVirt's (and OVN) control (and as such is not supported).
</pre>
<blockquote type="cite">
<pre wrap="">What is the purpose of
adding my bridges to Ovirt through the external provider and
configure
them on my VM
</pre>
</blockquote>
<pre wrap="">I am not quite sure I understand.
The external provider (OVN provider to be specific), does not add any
bridges
to the system. It is using the br-int bridge created by OVN. The
networks
created by the OVN provider are purely logical entities,
implemented using
the OVN br-int bridge.
Marcin
----- Original Message -----
</pre>
<blockquote type="cite">
<pre wrap="">From: "Sverker Abrahamsson" <a moz-do-not-send="true" class="moz-txt-link-rfc2396E" href="mailto:sverker@abrahamsson.com"><sverker@abrahamsson.com></a>
To: "Marcin Mirecki" <a moz-do-not-send="true" class="moz-txt-link-rfc2396E" href="mailto:mmirecki@redhat.com"><mmirecki@redhat.com></a>
Cc: "Ovirt Users" <a moz-do-not-send="true" class="moz-txt-link-rfc2396E" href="mailto:users@ovirt.org"><users@ovirt.org></a>
Sent: Friday, December 30, 2016 12:15:43 PM
Subject: Re: [ovirt-users] Issue with OVN/OVS and mandatory
ovirtmgmt
network
Hi
That is the logic I quite don't understand. What is the purpose of
adding my bridges to Ovirt through the external provider and
configure
them on my VM if you are disregarding that and using br-int anyway?
/Sverker
Den 2016-12-30 kl. 10:53, skrev Marcin Mirecki:
</pre>
<blockquote type="cite">
<pre wrap="">Sverker,
br-int is the integration bridge created by default in OVN. This
is the
bridge we use for the OVN provider. As OVN is required to be
installed,
we assume that this bridge is present.
Using any other ovs bridge is not supported, and will require
custom code
changes (such as the ones you created).
The proper setup in your case would probably be to create br-int
and
connect
this to your ovirtbridge, although I don't know the details of
your env,
so
this is just my best guess.
Marcin
----- Original Message -----
</pre>
<blockquote type="cite">
<pre wrap="">From: "Sverker Abrahamsson" <a moz-do-not-send="true" class="moz-txt-link-rfc2396E" href="mailto:sverker@abrahamsson.com"><sverker@abrahamsson.com></a>
To: "Marcin Mirecki" <a moz-do-not-send="true" class="moz-txt-link-rfc2396E" href="mailto:mmirecki@redhat.com"><mmirecki@redhat.com></a>
Cc: "Ovirt Users" <a moz-do-not-send="true" class="moz-txt-link-rfc2396E" href="mailto:users@ovirt.org"><users@ovirt.org></a>, "Numan Siddique"
<a moz-do-not-send="true" class="moz-txt-link-rfc2396E" href="mailto:nusiddiq@redhat.com"><nusiddiq@redhat.com></a>
Sent: Friday, December 30, 2016 1:14:50 AM
Subject: Re: [ovirt-users] Issue with OVN/OVS and mandatory
ovirtmgmt
network
Even better, if the value is not hardcoded then the configured
value is
used. Might be that I'm missunderstanding something but this is
the
behaviour I expected instead of that it is using br-int.
Attached is a patch which properly sets up the xml, in case
there is
already a virtual port there + testcode of some variants
/Sverker
Den 2016-12-29 kl. 22:55, skrev Sverker Abrahamsson:
</pre>
<blockquote type="cite">
<pre wrap="">When I change
/usr/libexec/vdsm/hooks/before_device_create/ovirt_provider_ovn_hook
to instead of hardcoded to br-int use BRIDGE_NAME =
'ovirtbridge' then
I get the expected behaviour and I get a working network
connectivity
in my VM with IP provided by dhcp.
/Sverker
Den 2016-12-29 kl. 22:07, skrev Sverker Abrahamsson:
</pre>
<blockquote type="cite">
<pre wrap="">By default the vNic profile of my OVN bridge ovirtbridge gets a
Network filter named vdsm-no-mac-spoofing. If I instead set
No filter
then I don't get those ebtables / iptables messages. It seems
that
there is some issue between ovirt/vdsm and firewalld, which
we can
put to the side for now.
It is not clear for me why the port is added on br-int
instead of the
bridge I've assigned to the VM, which is ovirtbridge??
/Sverker
Den 2016-12-29 kl. 14:20, skrev Sverker Abrahamsson:
</pre>
<blockquote type="cite">
<pre wrap="">The specific command most likely fails because there is no
chain
named libvirt-J-vnet0, but when should that have been created?
/Sverker
-------- Vidarebefordrat meddelande --------
Ämne: Re: [ovirt-users] Issue with OVN/OVS and mandatory
ovirtmgmt
network
Datum: Thu, 29 Dec 2016 08:06:29 -0500 (EST)
Från: Marcin Mirecki <a moz-do-not-send="true" class="moz-txt-link-rfc2396E" href="mailto:mmirecki@redhat.com"><mmirecki@redhat.com></a>
Till: Sverker Abrahamsson <a moz-do-not-send="true" class="moz-txt-link-rfc2396E" href="mailto:sverker@abrahamsson.com"><sverker@abrahamsson.com></a>
Kopia: Ovirt Users <a moz-do-not-send="true" class="moz-txt-link-rfc2396E" href="mailto:users@ovirt.org"><users@ovirt.org></a>, Lance Richardson
<a moz-do-not-send="true" class="moz-txt-link-rfc2396E" href="mailto:lrichard@redhat.com"><lrichard@redhat.com></a>, Numan Siddique <a moz-do-not-send="true" class="moz-txt-link-rfc2396E" href="mailto:nusiddiq@redhat.com"><nusiddiq@redhat.com></a>
Let me add the OVN team.
Lance, Numan,
Can you please look at this?
Trying to plug a vNIC results in:
</pre>
<blockquote type="cite">
<blockquote type="cite">
<blockquote type="cite">
<blockquote type="cite">
<blockquote type="cite">
<blockquote type="cite">
<blockquote type="cite">
<pre wrap="">Dec 28 23:31:35 h2 ovs-vsctl:
ovs|00001|vsctl|INFO|Called as
ovs-vsctl
--timeout=5 -- --if-exists del-port vnet0 -- add-port
br-int
vnet0 --
set Interface vnet0
"external-ids:attached-mac=\"00:1a:4a:16:01:51\""
-- set Interface vnet0
"external-ids:iface-id=\"e8853aac-8a75-41b0-8010-e630017dcdd8\""
--
set Interface vnet0
"external-ids:vm-id=\"b9440d60-ef5a-4e2b-83cf-081df7c09e6f\""
--
set
Interface vnet0 external-ids:iface-status=active
Dec 28 23:31:35 h2 kernel: device vnet0 entered
promiscuous
mode
Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
'/usr/sbin/ebtables --concurrent -t nat -D PREROUTING
-i vnet0
-j
libvirt-J-vnet0' failed:
Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
</pre>
</blockquote>
</blockquote>
</blockquote>
</blockquote>
</blockquote>
</blockquote>
</blockquote>
<pre wrap="">More details below
----- Original Message -----
</pre>
<blockquote type="cite">
<pre wrap="">From: "Sverker Abrahamsson"<a moz-do-not-send="true" class="moz-txt-link-rfc2396E" href="mailto:sverker@abrahamsson.com"><sverker@abrahamsson.com></a>
To: "Marcin Mirecki"<a moz-do-not-send="true" class="moz-txt-link-rfc2396E" href="mailto:mmirecki@redhat.com"><mmirecki@redhat.com></a>
Cc: "Ovirt Users"<a moz-do-not-send="true" class="moz-txt-link-rfc2396E" href="mailto:users@ovirt.org"><users@ovirt.org></a>
Sent: Thursday, December 29, 2016 1:42:11 PM
Subject: Re: [ovirt-users] Issue with OVN/OVS and mandatory
ovirtmgmt
network
Hi
Same problem still..
/Sverker
Den 2016-12-29 kl. 13:34, skrev Marcin Mirecki:
</pre>
<blockquote type="cite">
<pre wrap="">Hi,
The tunnels are created to connect multiple OVN controllers.
If there is only one, there is no need for the tunnels, so
none
will be created, this is the correct behavior.
Does the problem still occur after setting configuring the
OVN-controller?
Marcin
----- Original Message -----
</pre>
<blockquote type="cite">
<pre wrap="">From: "Sverker Abrahamsson"<a moz-do-not-send="true" class="moz-txt-link-rfc2396E" href="mailto:sverker@abrahamsson.com"><sverker@abrahamsson.com></a>
To: "Marcin Mirecki"<a moz-do-not-send="true" class="moz-txt-link-rfc2396E" href="mailto:mmirecki@redhat.com"><mmirecki@redhat.com></a>
Cc: "Ovirt Users"<a moz-do-not-send="true" class="moz-txt-link-rfc2396E" href="mailto:users@ovirt.org"><users@ovirt.org></a>
Sent: Thursday, December 29, 2016 11:44:32 AM
Subject: Re: [ovirt-users] Issue with OVN/OVS and mandatory
ovirtmgmt
network
Hi
The rpm packages you listed in the other mail are
installed but I
had
not run vdsm-tool ovn-config to create tunnel as the OVN
controller
is
on the same host.
[root@h2 ~]# rpm -q openvswitch-ovn-common
openvswitch-ovn-common-2.6.90-1.el7.centos.x86_64
[root@h2 ~]# rpm -q openvswitch-ovn-host
openvswitch-ovn-host-2.6.90-1.el7.centos.x86_64
[root@h2 ~]# rpm -q python-openvswitch
python-openvswitch-2.6.90-1.el7.centos.noarch
After removing my manually created br-int and run
vdsm-tool ovn-config 127.0.0.1 172.27.1.1
then I have the br-int but 'ip link show' does not show
any link
'genev_sys_' nor does 'ovs-vsctl show' any port for ovn.
I assume
these
are when there is an actual tunnel?
[root@h2 ~]# ovs-vsctl show
ebb6aede-cbbc-4f4f-a88a-a9cd72b2bd23
Bridge br-int
fail_mode: secure
Port br-int
Interface br-int
type: internal
Bridge ovirtbridge
Port ovirtbridge
Interface ovirtbridge
type: internal
Bridge "ovsbridge0"
Port "ovsbridge0"
Interface "ovsbridge0"
type: internal
Port "eth0"
Interface "eth0"
ovs_version: "2.6.90"
[root@h2 ~]# ip link show
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state
UNKNOWN
mode
DEFAULT qlen 1
link/loopback 00:00:00:00:00:00 brd
00:00:00:00:00:00
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc
pfifo_fast
master ovs-system state UP mode DEFAULT qlen 1000
link/ether 44:8a:5b:84:7d:b3 brd ff:ff:ff:ff:ff:ff
3: ovs-system: <BROADCAST,MULTICAST> mtu 1500 qdisc noop
state
DOWN
mode
DEFAULT qlen 1000
link/ether 5a:14:cf:28:47:e2 brd ff:ff:ff:ff:ff:ff
4: ovsbridge0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500
qdisc
noqueue
state UNKNOWN mode DEFAULT qlen 1000
link/ether 44:8a:5b:84:7d:b3 brd ff:ff:ff:ff:ff:ff
5: br-int: <BROADCAST,MULTICAST> mtu 1500 qdisc noop
state DOWN
mode
DEFAULT qlen 1000
link/ether 9e:b0:3a:9d:f2:4b brd ff:ff:ff:ff:ff:ff
6: ovirtbridge: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu
1500 qdisc
noqueue
state UNKNOWN mode DEFAULT qlen 1000
link/ether a6:f6:e5:a4:5b:45 brd ff:ff:ff:ff:ff:ff
7: dummy0: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc
noqueue
master
ovirtmgmt state UNKNOWN mode DEFAULT qlen 1000
link/ether 66:e0:1c:c3:a9:d8 brd ff:ff:ff:ff:ff:ff
8: ovirtmgmt: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500
qdisc
noqueue
state UP mode DEFAULT qlen 1000
link/ether 66:e0:1c:c3:a9:d8 brd ff:ff:ff:ff:ff:ff
Firewall settings:
[root@h2 ~]# firewall-cmd --list-all-zones
work
target: default
icmp-block-inversion: no
interfaces:
sources:
services: dhcpv6-client ssh
ports:
protocols:
masquerade: no
forward-ports:
sourceports:
icmp-blocks:
rich rules:
drop
target: DROP
icmp-block-inversion: no
interfaces:
sources:
services:
ports:
protocols:
masquerade: no
forward-ports:
sourceports:
icmp-blocks:
rich rules:
internal
target: default
icmp-block-inversion: no
interfaces:
sources:
services: dhcpv6-client mdns samba-client ssh
ports:
protocols:
masquerade: no
forward-ports:
sourceports:
icmp-blocks:
rich rules:
external
target: default
icmp-block-inversion: no
interfaces:
sources:
services: ssh
ports:
protocols:
masquerade: yes
forward-ports:
sourceports:
icmp-blocks:
rich rules:
trusted
target: ACCEPT
icmp-block-inversion: no
interfaces:
sources:
services:
ports:
protocols:
masquerade: no
forward-ports:
sourceports:
icmp-blocks:
rich rules:
home
target: default
icmp-block-inversion: no
interfaces:
sources:
services: dhcpv6-client mdns samba-client ssh
ports:
protocols:
masquerade: no
forward-ports:
sourceports:
icmp-blocks:
rich rules:
dmz
target: default
icmp-block-inversion: no
interfaces:
sources:
services: ssh
ports:
protocols:
masquerade: no
forward-ports:
sourceports:
icmp-blocks:
rich rules:
public (active)
target: default
icmp-block-inversion: no
interfaces: eth0 ovsbridge0
sources:
services: dhcpv6-client ssh
ports:
protocols:
masquerade: no
forward-ports:
sourceports:
icmp-blocks:
rich rules:
block
target: %%REJECT%%
icmp-block-inversion: no
interfaces:
sources:
services:
ports:
protocols:
masquerade: no
forward-ports:
sourceports:
icmp-blocks:
rich rules:
ovirt (active)
target: default
icmp-block-inversion: no
interfaces: ovirtbridge ovirtmgmt
sources:
services: dhcp ovirt-fence-kdump-listener ovirt-http
ovirt-https
ovirt-imageio-proxy ovirt-postgres ovirt-provider-ovn
ovirt-vmconsole-proxy ovirt-websocket-proxy ssh vdsm
ports:
protocols:
masquerade: yes
forward-ports:
sourceports:
icmp-blocks:
rich rules:
rule family="ipv4" port port="6641"
protocol="tcp"
accept
rule family="ipv4" port port="6642"
protocol="tcp"
accept
The db dump is attached
/Sverker
Den 2016-12-29 kl. 09:50, skrev Marcin Mirecki:
</pre>
<blockquote type="cite">
<pre wrap="">Hi,
Can you please do: "sudo ovsdb-client dump"
on the host and send me the output?
Have you configured the ovn controller to connect to the
OVN north? You can do it using "vdsm-tool ovn-config" or
using the OVN tools directly.
Please check
out:<a moz-do-not-send="true" class="moz-txt-link-freetext" href="https://www.ovirt.org/blog/2016/11/ovirt-provider-ovn/">https://www.ovirt.org/blog/2016/11/ovirt-provider-ovn/</a>
for details.
Also please note that the OVN provider is completely
different
from the neutron-openvswitch plugin. Please don't mix
the two.
Marcin
----- Original Message -----
</pre>
<blockquote type="cite">
<pre wrap="">From: "Marcin Mirecki"<a moz-do-not-send="true" class="moz-txt-link-rfc2396E" href="mailto:mmirecki@redhat.com"><mmirecki@redhat.com></a>
To: "Sverker Abrahamsson"<a moz-do-not-send="true" class="moz-txt-link-rfc2396E" href="mailto:sverker@abrahamsson.com"><sverker@abrahamsson.com></a>
Cc: "Ovirt Users"<a moz-do-not-send="true" class="moz-txt-link-rfc2396E" href="mailto:users@ovirt.org"><users@ovirt.org></a>
Sent: Thursday, December 29, 2016 9:27:19 AM
Subject: Re: [ovirt-users] Issue with OVN/OVS and
mandatory
ovirtmgmt
network
Hi,
br-int is the OVN integration bridge, it should have been
created
when installing OVN. I assume you have the following
packages
installed
on the host:
openvswitch-ovn-common
openvswitch-ovn-host
python-openvswitch
Please give me some time to look at the connectivity
problem.
Marcin
----- Original Message -----
</pre>
<blockquote type="cite">
<pre wrap="">From: "Sverker Abrahamsson"<a moz-do-not-send="true" class="moz-txt-link-rfc2396E" href="mailto:sverker@abrahamsson.com"><sverker@abrahamsson.com></a>
To: "Marcin Mirecki"<a moz-do-not-send="true" class="moz-txt-link-rfc2396E" href="mailto:mmirecki@redhat.com"><mmirecki@redhat.com></a>
Cc: "Ovirt Users"<a moz-do-not-send="true" class="moz-txt-link-rfc2396E" href="mailto:users@ovirt.org"><users@ovirt.org></a>
Sent: Thursday, December 29, 2016 12:47:04 AM
Subject: Re: [ovirt-users] Issue with OVN/OVS and
mandatory
ovirtmgmt
network
From
/usr/libexec/vdsm/hooks/before_device_create/ovirt_provider_ovn_hook
(installed by ovirt-provider-ovn-driver rpm):
BRIDGE_NAME = 'br-int'
Den 2016-12-28 kl. 23:56, skrev Sverker Abrahamsson:
</pre>
<blockquote type="cite">
<pre wrap="">Googling on the message about br-int suggested adding
that
bridge to
ovs:
ovs-vsctl add-br br-int
Then the VM is able to boot, but it fails to get network
connectivity.
Output in /var/log/messages:
Dec 28 23:31:35 h2 ovs-vsctl:
ovs|00001|vsctl|INFO|Called as
ovs-vsctl
--timeout=5 -- --if-exists del-port vnet0 -- add-port
br-int
vnet0 --
set Interface vnet0
"external-ids:attached-mac=\"00:1a:4a:16:01:51\""
-- set Interface vnet0
"external-ids:iface-id=\"e8853aac-8a75-41b0-8010-e630017dcdd8\""
--
set Interface vnet0
"external-ids:vm-id=\"b9440d60-ef5a-4e2b-83cf-081df7c09e6f\""
--
set
Interface vnet0 external-ids:iface-status=active
Dec 28 23:31:35 h2 kernel: device vnet0 entered
promiscuous
mode
Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
'/usr/sbin/ebtables --concurrent -t nat -D PREROUTING
-i vnet0
-j
libvirt-J-vnet0' failed:
Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
'/usr/sbin/ebtables --concurrent -t nat -D
POSTROUTING -o
vnet0
-j
libvirt-P-vnet0' failed:
Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
'/usr/sbin/ebtables --concurrent -t nat -L
libvirt-J-vnet0'
failed:
Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
'/usr/sbin/ebtables --concurrent -t nat -L
libvirt-P-vnet0'
failed:
Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
'/usr/sbin/ebtables --concurrent -t nat -F
libvirt-J-vnet0'
failed:
Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
'/usr/sbin/ebtables --concurrent -t nat -X
libvirt-J-vnet0'
failed:
Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
'/usr/sbin/ebtables --concurrent -t nat -F
libvirt-P-vnet0'
failed:
Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
'/usr/sbin/ebtables --concurrent -t nat -X
libvirt-P-vnet0'
failed:
Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
'/usr/sbin/ebtables --concurrent -t nat -F J-vnet0-mac'
failed:
Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
'/usr/sbin/ebtables --concurrent -t nat -X J-vnet0-mac'
failed:
Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
'/usr/sbin/ebtables --concurrent -t nat -F
J-vnet0-arp-mac'
failed:
Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
'/usr/sbin/ebtables --concurrent -t nat -X
J-vnet0-arp-mac'
failed:
Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
'/usr/sbin/iptables -w2 -w -D libvirt-out -m physdev
--physdev-is-bridged --physdev-out vnet0 -g FO-vnet0'
failed:
Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
'/usr/sbin/iptables -w2 -w -D libvirt-out -m physdev
--physdev-out
vnet0 -g FO-vnet0' failed:
Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
'/usr/sbin/iptables -w2 -w -D libvirt-in -m physdev
--physdev-in
vnet0
-g FI-vnet0' failed:
Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
'/usr/sbin/iptables -w2 -w -D libvirt-host-in -m physdev
--physdev-in
vnet0 -g HI-vnet0' failed:
Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
'/usr/sbin/iptables -w2 -w -F FO-vnet0' failed:
Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
'/usr/sbin/iptables -w2 -w -X FO-vnet0' failed:
Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
'/usr/sbin/iptables -w2 -w -F FI-vnet0' failed:
Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
'/usr/sbin/iptables -w2 -w -X FI-vnet0' failed:
Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
'/usr/sbin/iptables -w2 -w -F HI-vnet0' failed:
Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
'/usr/sbin/iptables -w2 -w -X HI-vnet0' failed:
Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
'/usr/sbin/iptables -w2 -w -E FP-vnet0 FO-vnet0' failed:
Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
'/usr/sbin/iptables -w2 -w -E FJ-vnet0 FI-vnet0' failed:
Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
'/usr/sbin/iptables -w2 -w -E HJ-vnet0 HI-vnet0' failed:
Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
'/usr/sbin/ip6tables -w2 -w -D libvirt-out -m physdev
--physdev-is-bridged --physdev-out vnet0 -g FO-vnet0'
failed:
Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
'/usr/sbin/ip6tables -w2 -w -D libvirt-out -m physdev
--physdev-out
vnet0 -g FO-vnet0' failed:
Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
'/usr/sbin/ip6tables -w2 -w -D libvirt-in -m physdev
--physdev-in
vnet0 -g FI-vnet0' failed:
Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
'/usr/sbin/ip6tables -w2 -w -D libvirt-host-in -m
physdev
--physdev-in
vnet0 -g HI-vnet0' failed:
Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
'/usr/sbin/ip6tables -w2 -w -F FO-vnet0' failed:
Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
'/usr/sbin/ip6tables -w2 -w -X FO-vnet0' failed:
Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
'/usr/sbin/ip6tables -w2 -w -F FI-vnet0' failed:
Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
'/usr/sbin/ip6tables -w2 -w -X FI-vnet0' failed:
Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
'/usr/sbin/ip6tables -w2 -w -F HI-vnet0' failed:
Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
'/usr/sbin/ip6tables -w2 -w -X HI-vnet0' failed:
Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
'/usr/sbin/ip6tables -w2 -w -E FP-vnet0 FO-vnet0'
failed:
Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
'/usr/sbin/ip6tables -w2 -w -E FJ-vnet0 FI-vnet0'
failed:
Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
'/usr/sbin/ip6tables -w2 -w -E HJ-vnet0 HI-vnet0'
failed:
Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
'/usr/sbin/ebtables --concurrent -t nat -D PREROUTING
-i vnet0
-j
libvirt-I-vnet0' failed:
Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
'/usr/sbin/ebtables --concurrent -t nat -D
POSTROUTING -o
vnet0
-j
libvirt-O-vnet0' failed:
Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
'/usr/sbin/ebtables --concurrent -t nat -L
libvirt-I-vnet0'
failed:
Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
'/usr/sbin/ebtables --concurrent -t nat -L
libvirt-O-vnet0'
failed:
Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
'/usr/sbin/ebtables --concurrent -t nat -F
libvirt-I-vnet0'
failed:
Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
'/usr/sbin/ebtables --concurrent -t nat -X
libvirt-I-vnet0'
failed:
Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
'/usr/sbin/ebtables --concurrent -t nat -F
libvirt-O-vnet0'
failed:
Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
'/usr/sbin/ebtables --concurrent -t nat -X
libvirt-O-vnet0'
failed:
Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
'/usr/sbin/ebtables --concurrent -t nat -L
libvirt-P-vnet0'
failed:
Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
'/usr/sbin/ebtables --concurrent -t nat -E
libvirt-P-vnet0
libvirt-O-vnet0' failed:
Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
'/usr/sbin/ebtables --concurrent -t nat -F I-vnet0-mac'
failed:
Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
'/usr/sbin/ebtables --concurrent -t nat -X I-vnet0-mac'
failed:
Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
'/usr/sbin/ebtables --concurrent -t nat -F
I-vnet0-arp-mac'
failed:
Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
'/usr/sbin/ebtables --concurrent -t nat -X
I-vnet0-arp-mac'
failed:
[root@h2 etc]# ovs-vsctl show
ebb6aede-cbbc-4f4f-a88a-a9cd72b2bd23
Bridge ovirtbridge
Port "ovirtport0"
Interface "ovirtport0"
type: internal
Port ovirtbridge
Interface ovirtbridge
type: internal
Bridge "ovsbridge0"
Port "ovsbridge0"
Interface "ovsbridge0"
type: internal
Port "eth0"
Interface "eth0"
Bridge br-int
Port br-int
Interface br-int
type: internal
Port "vnet0"
Interface "vnet0"
ovs_version: "2.6.90"
Searching through the code it appears that br-int
comes from
neutron-openvswitch plugin ??
[root@h2 share]# rpm -qf
/usr/share/otopi/plugins/ovirt-host-deploy/openstack/neutron_openvswitch.py
ovirt-host-deploy-1.6.0-0.0.master.20161215101008.gitb76ad50.el7.centos.noarch
/Sverker
Den 2016-12-28 kl. 23:24, skrev Sverker Abrahamsson:
</pre>
<blockquote type="cite">
<pre wrap="">In addition I had to add an alias to modprobe:
[root@h2 modprobe.d]# cat dummy.conf
alias dummy0 dummy
Den 2016-12-28 kl. 23:03, skrev Sverker Abrahamsson:
</pre>
<blockquote type="cite">
<pre wrap="">Hi
I first tried to set device name to dummy_0, but
then ifup
did
not
succeed in creating the device unless I first did
'ip link
add
dummy_0 type dummy' but then it would not suceed to
establish
the if
on reboot.
Setting fake_nics = dummy0 would not work neither,
but this
works:
fake_nics = dummy*
The engine is now able to find the if and assign
bridge
ovirtmgmt to
it.
However, I then run into the next issue when
starting a VM:
2016-12-28 22:28:23,897 ERROR
[org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
(ForkJoinPool-1-worker-2) [] Correlation ID: null,
Call
Stack:
null,
Custom Event ID: -1, Message: VM CentOS7 is down
with error.
Exit
message: Cannot get interface MTU on 'br-int': No such
device.
This VM has a nic on ovirtbridge, which comes from
the OVN
provider.
/Sverker
Den 2016-12-28 kl. 14:38, skrev Marcin Mirecki:
</pre>
<blockquote
type="cite">
<pre wrap="">Sverker,
Can you try adding a vnic named veth_* or dummy_*,
(or alternatively add the name of the vnic to
vdsm.config fake_nics), and setup the management
network using this vnic?
I suppose adding the vnic you use for connecting
to the engine to fake_nics should make it visible
to the engine, and you should be able to use it for
the setup.
Marcin
----- Original Message -----
</pre>
<blockquote
type="cite">
<pre wrap="">From: "Marcin Mirecki"<a moz-do-not-send="true" class="moz-txt-link-rfc2396E" href="mailto:mmirecki@redhat.com"><mmirecki@redhat.com></a>
To: "Sverker Abrahamsson"<a moz-do-not-send="true" class="moz-txt-link-rfc2396E" href="mailto:sverker@abrahamsson.com"><sverker@abrahamsson.com></a>
Cc: "Ovirt Users"<a moz-do-not-send="true" class="moz-txt-link-rfc2396E" href="mailto:users@ovirt.org"><users@ovirt.org></a>
Sent: Wednesday, December 28, 2016 12:06:26 PM
Subject: Re: [ovirt-users] Issue with OVN/OVS and
mandatory
ovirtmgmt network
</pre>
<blockquote
type="cite">
<pre wrap="">I have an internal OVS bridge called ovirtbridge
which
has
a port
with
IP address, but in the host network settings
that port is
not
visible.
</pre>
</blockquote>
<pre wrap="">I just verified and unfortunately the virtual
ports are
not
visible in engine
to assign a network to :(
I'm afraid that the engine is not ready for such a
scenario
(even
if it
works).
Please give me some time to look for a solution.
----- Original Message -----
</pre>
<blockquote
type="cite">
<pre wrap="">From: "Sverker
Abrahamsson"<a moz-do-not-send="true" class="moz-txt-link-rfc2396E" href="mailto:sverker@abrahamsson.com"><sverker@abrahamsson.com></a>
To: "Marcin Mirecki"<a moz-do-not-send="true" class="moz-txt-link-rfc2396E" href="mailto:mmirecki@redhat.com"><mmirecki@redhat.com></a>
Cc: "Ovirt Users"<a moz-do-not-send="true" class="moz-txt-link-rfc2396E" href="mailto:users@ovirt.org"><users@ovirt.org></a>
Sent: Wednesday, December 28, 2016 11:48:24 AM
Subject: Re: [ovirt-users] Issue with OVN/OVS and
mandatory
ovirtmgmt
network
Hi Marcin
Yes, that is my issue. I don't want to let
ovirt/vdsm see
eth0
nor
ovsbridge0 since as soon as it sees them it
messes up the
network
config
so that the host will be unreachable.
I have an internal OVS bridge called ovirtbridge
which
has
a port
with
IP address, but in the host network settings
that port is
not
visible.
It doesn't help to name it ovirtmgmt.
The engine is able to communicate with the host
on the ip
it has
been
given, it's just that it believes that it HAS to
have a
ovirtmgmt
network which can't be on OVN.
/Sverker
Den 2016-12-28 kl. 10:45, skrev Marcin Mirecki:
</pre>
<blockquote
type="cite">
<pre wrap="">Hi Sverker,
The management network is mandatory on each
host. It's
used by
the
engine to communicate with the host.
Looking at your description and the exception
it looks
like it
is
missing.
The error is caused by not having any network
for the
host
(network list retrieved in
InterfaceDaoImpl.getHostNetworksByCluster -
which
gets all the networks on nics for a host from
vds_interface
table in the
DB).
Could you maybe create a virtual nic connected to
ovsbridge0 (as
I
understand you
have no physical nic available) and use this
for the
management
network?
</pre>
<blockquote
type="cite">
<pre wrap="">I then create a bridge for use with ovirt, with a
private
address.
</pre>
</blockquote>
<pre wrap="">I'm not quite sure I understand. Is this yet
another
bridge
connected to
ovsbridge0?
You could also attach the vnic for the management
network
here
if need
be.
Please keep in mind that OVN has no use in
setting up
the
management
network.
The OVN provider can only handle external
networks,
which
can
not be used
for a
management network.
Marcin
----- Original Message -----
</pre>
<blockquote
type="cite">
<pre wrap="">From: "Sverker
Abrahamsson"<a moz-do-not-send="true" class="moz-txt-link-rfc2396E" href="mailto:sverker@abrahamsson.com"><sverker@abrahamsson.com></a>
<a moz-do-not-send="true" class="moz-txt-link-abbreviated" href="mailto:To:users@ovirt.org">To:users@ovirt.org</a>
Sent: Wednesday, December 28, 2016 12:39:59 AM
Subject: [ovirt-users] Issue with OVN/OVS and
mandatory
ovirtmgmt
network
Hi
For long time I've been looking for proper
support in
ovirt for
Open
vSwitch
so I'm happy that it is moving in the right
direction.
However,
there
seems
to still be a dependency on a ovirtmgmt bridge
and I'm
unable
to move
that
to the OVN provider.
The hosting center where I rent hw instances
has a bit
special
network
setup,
so I have one physical network port with a /32
netmask
and
point-to-point
config to router. The physical port I connect
to a ovs
bridge
which has
the
public ip. Since ovirt always messes up the
network
config when
I've
tried
to let it have access to the network config
for the
physical
port, I've
set
eht0 and ovsbridge0 as hidden in vdsm.conf.
I then create a bridge for use with ovirt, with a
private
address. With
the
OVN provider I am now able to import these
into the
engine and
it looks
good. When creating a VM I can select that it
will have
a
vNic
on my OVS
bridge.
However, I can't start the VM as an exception
is thrown
in the
log:
2016-12-28 00:13:33,350 ERROR
[org.ovirt.engine.core.bll.RunVmCommand]
(default task-5) [3c882d53] Error during
ValidateFailure.:
java.lang.NullPointerException
at
org.ovirt.engine.core.bll.scheduling.policyunits.NetworkPolicyUnit.validateRequiredNetworksAvailable(NetworkPolicyUnit.java:140)
[bll.jar:]
at
org.ovirt.engine.core.bll.scheduling.policyunits.NetworkPolicyUnit.filter(NetworkPolicyUnit.java:69)
[bll.jar:]
at
org.ovirt.engine.core.bll.scheduling.SchedulingManager.runInternalFilters(SchedulingManager.java:597)
[bll.jar:]
at
org.ovirt.engine.core.bll.scheduling.SchedulingManager.runFilters(SchedulingManager.java:564)
[bll.jar:]
at
org.ovirt.engine.core.bll.scheduling.SchedulingManager.canSchedule(SchedulingManager.java:494)
[bll.jar:]
at
org.ovirt.engine.core.bll.validator.RunVmValidator.canRunVm(RunVmValidator.java:133)
[bll.jar:]
at
org.ovirt.engine.core.bll.RunVmCommand.validate(RunVmCommand.java:940)
[bll.jar:]
at
org.ovirt.engine.core.bll.CommandBase.internalValidate(CommandBase.java:886)
[bll.jar:]
at
org.ovirt.engine.core.bll.CommandBase.validateOnly(CommandBase.java:366)
[bll.jar:]
at
org.ovirt.engine.core.bll.PrevalidatingMultipleActionsRunner.canRunActions(PrevalidatingMultipleActionsRunner.java:113)
[bll.jar:]
at
org.ovirt.engine.core.bll.PrevalidatingMultipleActionsRunner.invokeCommands(PrevalidatingMultipleActionsRunner.java:99)
[bll.jar:]
at
org.ovirt.engine.core.bll.PrevalidatingMultipleActionsRunner.execute(PrevalidatingMultipleActionsRunner.java:76)
[bll.jar:]
at
org.ovirt.engine.core.bll.Backend.runMultipleActionsImpl(Backend.java:613)
[bll.jar:]
at
org.ovirt.engine.core.bll.Backend.runMultipleActions(Backend.java:583)
[bll.jar:]
Looking at that section of code where the
exception is
thrown,
I see
that
it
iterates over host networks to find required
networks,
which I
assume is
ovirtmgmt. In the host network setup dialog I
don't see
any
networks at
all
but it lists ovirtmgmt as required. It also
list the
OVN
networks but
these
can't be statically assigned as they are added
dynamically when
needed,
which is fine.
I believe that I either need to remove ovirtmgmt
network
or
configure
that
it
is provided by the OVN provider, but neither is
possible.
Preferably it
shouldn't be hardcoded which network is
management and
mandatory but be
possible to configure.
/Sverker
Den 2016-12-27 kl. 17:10, skrev Marcin Mirecki:
</pre>
</blockquote>
</blockquote>
</blockquote>
<pre wrap="">_______________________________________________
Users mailing list
<a moz-do-not-send="true" class="moz-txt-link-abbreviated" href="mailto:Users@ovirt.org">Users@ovirt.org</a>
<a moz-do-not-send="true" class="moz-txt-link-freetext" href="http://lists.ovirt.org/mailman/listinfo/users">http://lists.ovirt.org/mailman/listinfo/users</a>
</pre>
</blockquote>
</blockquote>
<pre wrap="">_______________________________________________
Users mailing list
<a moz-do-not-send="true" class="moz-txt-link-abbreviated" href="mailto:Users@ovirt.org">Users@ovirt.org</a>
<a moz-do-not-send="true" class="moz-txt-link-freetext" href="http://lists.ovirt.org/mailman/listinfo/users">http://lists.ovirt.org/mailman/listinfo/users</a>
</pre>
</blockquote>
<pre wrap="">_______________________________________________
Users mailing list
<a moz-do-not-send="true" class="moz-txt-link-abbreviated" href="mailto:Users@ovirt.org">Users@ovirt.org</a>
<a moz-do-not-send="true" class="moz-txt-link-freetext" href="http://lists.ovirt.org/mailman/listinfo/users">http://lists.ovirt.org/mailman/listinfo/users</a>
</pre>
</blockquote>
<pre wrap="">_______________________________________________
Users mailing list
<a moz-do-not-send="true" class="moz-txt-link-abbreviated" href="mailto:Users@ovirt.org">Users@ovirt.org</a>
<a moz-do-not-send="true" class="moz-txt-link-freetext" href="http://lists.ovirt.org/mailman/listinfo/users">http://lists.ovirt.org/mailman/listinfo/users</a>
</pre>
</blockquote>
</blockquote>
<pre wrap="">_______________________________________________
Users mailing list
<a moz-do-not-send="true" class="moz-txt-link-abbreviated" href="mailto:Users@ovirt.org">Users@ovirt.org</a>
<a moz-do-not-send="true" class="moz-txt-link-freetext" href="http://lists.ovirt.org/mailman/listinfo/users">http://lists.ovirt.org/mailman/listinfo/users</a>
</pre>
</blockquote>
</blockquote>
</blockquote>
</blockquote>
</blockquote>
<pre wrap="">_______________________________________________
Users mailing list
<a moz-do-not-send="true" class="moz-txt-link-abbreviated" href="mailto:Users@ovirt.org">Users@ovirt.org</a>
<a moz-do-not-send="true" class="moz-txt-link-freetext" href="http://lists.ovirt.org/mailman/listinfo/users">http://lists.ovirt.org/mailman/listinfo/users</a>
</pre>
</blockquote>
<pre wrap="">_______________________________________________
Users mailing list
<a moz-do-not-send="true" class="moz-txt-link-abbreviated" href="mailto:Users@ovirt.org">Users@ovirt.org</a>
<a moz-do-not-send="true" class="moz-txt-link-freetext" href="http://lists.ovirt.org/mailman/listinfo/users">http://lists.ovirt.org/mailman/listinfo/users</a>
</pre>
</blockquote>
<pre wrap="">_______________________________________________
Users mailing list
<a moz-do-not-send="true" class="moz-txt-link-abbreviated" href="mailto:Users@ovirt.org">Users@ovirt.org</a>
<a moz-do-not-send="true" class="moz-txt-link-freetext" href="http://lists.ovirt.org/mailman/listinfo/users">http://lists.ovirt.org/mailman/listinfo/users</a>
</pre>
</blockquote>
</blockquote>
</blockquote>
</blockquote>
</blockquote>
</blockquote>
</blockquote>
<pre wrap="">_______________________________________________
Users mailing list
<a moz-do-not-send="true" class="moz-txt-link-abbreviated" href="mailto:Users@ovirt.org">Users@ovirt.org</a>
<a moz-do-not-send="true" class="moz-txt-link-freetext" href="http://lists.ovirt.org/mailman/listinfo/users">http://lists.ovirt.org/mailman/listinfo/users</a>
</pre>
</blockquote>
<pre wrap="">_______________________________________________
Users mailing list
<a moz-do-not-send="true" class="moz-txt-link-abbreviated" href="mailto:Users@ovirt.org">Users@ovirt.org</a>
<a moz-do-not-send="true" class="moz-txt-link-freetext" href="http://lists.ovirt.org/mailman/listinfo/users">http://lists.ovirt.org/mailman/listinfo/users</a>
</pre>
</blockquote>
</blockquote>
</blockquote>
<br>
<br>
<fieldset class="mimeAttachmentHeader"></fieldset>
<br>
<pre wrap="">_______________________________________________
Users mailing list
<a class="moz-txt-link-abbreviated" href="mailto:Users@ovirt.org">Users@ovirt.org</a>
<a class="moz-txt-link-freetext" href="http://lists.ovirt.org/mailman/listinfo/users">http://lists.ovirt.org/mailman/listinfo/users</a>
</pre>
</blockquote>
<br>
</body>
</html>