<div>Need some guidance on this one.<br></div><div><br></div><div>Config:<br></div><div>1U with 2 NICs.<br></div><div>NIC 1 plugged to local switch - gets local IP<br></div><div>NIC 2 plugged direct to cable modem - need to set IP inside VM to public static IP<br></div><div>VM will be CentOS, already know how to configure NIC once I can get the 2nd NIC assigned to it.<br></div><div><br></div><div>Do I use PCI passthru? Or where do I start to get this configured? I did setup NIC 2 under Network --> Networks. Created a NIC called "external_NIC". External NIC has description and then I configured 2 DNS servers which are given to me by the ISP.<br></div><div><br></div><div>Under Compute --> Hosts --> <My Host> --> Network Interfaces (I have both NICs showing as up) --> Setup Host Networks ---> NIC 2 is the interface --> Assignment of Logical networks is "external_NIC".<br></div><div><br></div><div>I was assuming I was done, so I go to my VM add NIC 2, click run and I see:<br></div><div><br></div><div>Cannot run VM. There is no host that satisfies current scheduling constraints. See below for details:<br></div><ul style="margin-top:0"><li>The
host <MY HOST> did not satisfy internal filter Network because there
are no free virtual functions which are suitable for virtual nic(s)
nic2. A virtual function is considered as suitable if the VF's
configuration of its physical function contains the virtual nic's
network/network label.<br></li></ul><div>Need guidance on what to read to get this working.<br></div><div><br></div><div>Thanks!<br></div>