<div dir="ltr"><div><div><div><div>Hi, <br><br></div>you need a second host so as power management to work. <br></div>Since you verified it with command line then adding a second host should resolve this issue. <br><br></div>In regards to the interface, you need to remove the bridge interface as instructed (make it a simple interface) then leave ovirt to configure it ovirtmgmt bridge. <br><br><br></div>Alex<br></div><div class="gmail_extra"><br><div class="gmail_quote">On Wed, Mar 28, 2018 at 9:17 AM, TomK <span dir="ltr"><<a href="mailto:tomkcpr@mdevsys.com" target="_blank">tomkcpr@mdevsys.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">Hey Guy's,<br>
<br>
I've tested my ILO2 fence from the ovirt engine CLI and that works:<br>
<br>
fence_ilo2 -a 192.168.0.37 -l <USER> --password="<SECRET>" --ssl-insecure --tls1.0 -v -o status<br>
<br>
The UI gives me:<br>
<br>
Test failed: Failed to run fence status-check on host 'ph-host01.my.dom'. No other host was available to serve as proxy for the operation.<br>
<br>
Going to add a second host in a bit but anyway to get this working with just one host? I'm just adding the one host to oVirt for some POC we are doing atm but the UI forces me to adjust Power Management settings before proceeding.<br>
<br>
Also:<br>
<br>
2018-03-28 02:04:15,183-04 WARN [<a href="http://org.ovirt.engine.core.bll.net">org.ovirt.engine.core.bll.net</a><wbr>work.NetworkConfigurator] (EE-ManagedThreadFactory-engin<wbr>e-Thread-335) [2d691be9] Failed to find a valid interface for the management network of host ph-host01.my.dom. If the interface br0 is a bridge, it should be torn-down manually.<br>
2018-03-28 02:04:15,184-04 ERROR [org.ovirt.engine.core.bll.hos<wbr>tdeploy.InstallVdsInternalComm<wbr>and] (EE-ManagedThreadFactory-engin<wbr>e-Thread-335) [2d691be9] Exception: org.ovirt.engine.core.bll.netw<wbr>ork.NetworkConfigurator$Networ<wbr>kConfiguratorException: Interface br0 is invalid for management network<br>
<br>
<br>
I've these defined as such but not clear what it is expecting:<br>
<br>
[root@ph-host01 ~]# ip a<br>
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN qlen 1<br>
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00<br>
inet <a href="http://127.0.0.1/8" rel="noreferrer" target="_blank">127.0.0.1/8</a> scope host lo<br>
valid_lft forever preferred_lft forever<br>
inet6 ::1/128 scope host<br>
valid_lft forever preferred_lft forever<br>
2: eth0: <BROADCAST,MULTICAST,SLAVE,UP,<wbr>LOWER_UP> mtu 1500 qdisc mq master bond0 state UP qlen 1000<br>
link/ether 78:e7:d1:8c:b1:ba brd ff:ff:ff:ff:ff:ff<br>
3: eth1: <NO-CARRIER,BROADCAST,MULTICAS<wbr>T,SLAVE,UP> mtu 1500 qdisc mq master bond0 state DOWN qlen 1000<br>
link/ether 78:e7:d1:8c:b1:ba brd ff:ff:ff:ff:ff:ff<br>
4: eth2: <NO-CARRIER,BROADCAST,MULTICAS<wbr>T,SLAVE,UP> mtu 1500 qdisc mq master bond0 state DOWN qlen 1000<br>
link/ether 78:e7:d1:8c:b1:ba brd ff:ff:ff:ff:ff:ff<br>
5: eth3: <NO-CARRIER,BROADCAST,MULTICAS<wbr>T,SLAVE,UP> mtu 1500 qdisc mq master bond0 state DOWN qlen 1000<br>
link/ether 78:e7:d1:8c:b1:ba brd ff:ff:ff:ff:ff:ff<br>
21: bond0: <BROADCAST,MULTICAST,MASTER,UP<wbr>,LOWER_UP> mtu 1500 qdisc noqueue master br0 state UP qlen 1000<br>
link/ether 78:e7:d1:8c:b1:ba brd ff:ff:ff:ff:ff:ff<br>
inet6 fe80::7ae7:d1ff:fe8c:b1ba/64 scope link<br>
valid_lft forever preferred_lft forever<br>
23: ;vdsmdummy;: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000<br>
link/ether fe:69:c7:50:0d:dd brd ff:ff:ff:ff:ff:ff<br>
24: br0: <BROADCAST,MULTICAST,UP,LOWER_<wbr>UP> mtu 1500 qdisc noqueue state UP qlen 1000<br>
link/ether 78:e7:d1:8c:b1:ba brd ff:ff:ff:ff:ff:ff<br>
inet <a href="http://192.168.0.39/23" rel="noreferrer" target="_blank">192.168.0.39/23</a> brd 192.168.1.255 scope global br0<br>
valid_lft forever preferred_lft forever<br>
inet6 fe80::7ae7:d1ff:fe8c:b1ba/64 scope link<br>
valid_lft forever preferred_lft forever<br>
[root@ph-host01 ~]# cd /etc/sysconfig/network-scripts<wbr>/<br>
[root@ph-host01 network-scripts]# cat ifcfg-br0<br>
DEVICE=br0<br>
TYPE=Bridge<br>
BOOTPROTO=none<br>
IPADDR=192.168.0.39<br>
NETMASK=<a href="tel:255.255.254.0" value="+302552552540" target="_blank">255.255.254.0</a><br>
GATEWAY=192.168.0.1<br>
ONBOOT=yes<br>
DELAY=0<br>
USERCTL=no<br>
DEFROUTE=yes<br>
NM_CONTROLLED=no<br>
DOMAIN="my.dom nix.my.dom"<br>
SEARCH="my.dom nix.my.dom"<br>
HOSTNAME=ph-host01.my.dom<br>
DNS1=192.168.0.224<br>
DNS2=192.168.0.44<br>
DNS3=192.168.0.45<br>
ZONE=public<br>
[root@ph-host01 network-scripts]# cat ifcfg-bond0<br>
DEVICE=bond0<br>
ONBOOT=yes<br>
BOOTPROTO=none<br>
USERCTL=no<br>
NM_CONTROLLED=no<br>
BONDING_OPTS="miimon=100 mode=2"<br>
BRIDGE=br0<br>
#<br>
#<br>
# IPADDR=192.168.0.39<br>
# NETMASK=<a href="tel:255.255.254.0" value="+302552552540" target="_blank">255.255.254.0</a><br>
# GATEWAY=192.168.0.1<br>
# DNS1=192.168.0.1<br>
[root@ph-host01 network-scripts]#<span class="HOEnZb"><font color="#888888"><br>
<br>
<br>
-- <br>
Cheers,<br>
Tom K.<br>
------------------------------<wbr>------------------------------<wbr>-------------------------<br>
<br>
Living on earth is expensive, but it includes a free trip around the sun.<br>
<br>
______________________________<wbr>_________________<br>
Users mailing list<br>
<a href="mailto:Users@ovirt.org" target="_blank">Users@ovirt.org</a><br>
<a href="http://lists.ovirt.org/mailman/listinfo/users" rel="noreferrer" target="_blank">http://lists.ovirt.org/mailman<wbr>/listinfo/users</a><br>
</font></span></blockquote></div><br></div>