All good. Turns out the fix was-echo $'NM_CONTROLLED=no' > /etc/sysconfig/network-scripts/ifcfg-eth0 +echo $'' > /etc/sysconfig/network-scripts/ifcfg-eth0 ++CLOUD_CONFIG=/etc/cloud/cloud.cfg +grep -q ' - resolv-conf' $CLOUD_CONFIG || sed -i -e 's/ - timezone/&\n - resolv-conf/' $CLOUD_CONFIG+chkconfig NetworkManager offOn Mon, Feb 20, 2017 at 1:12 PM, Marc Young <3vilpenguin@gmail.com> wrote:FWIW I think the problem was cloud.cfg not having the resolv.conf module set up for management.I'm investigating now but it's taking longer than I like due to VPN issues. I'll update when I finally have the resolutionOn Mon, Feb 20, 2017 at 10:01 AM, Marc Young <3vilpenguin@gmail.com> wrote:I started poking around in the cloud-init code. it's running v0.7.5 and the network code (forked) for rhel.py is here: https://github.com/number5/cloud-init/blob/0.7.5/cloud init/distros/rhel.py#L87 I used journalctl /usr/bin/cloud-init to get debug output and got this:It definitely feels like something related to cloud-init or my setup . I'll keep looking, perhaps the write to /etc/resolv.conf is failing silently. I can verify that any changes made to /etc/resolv.conf survive a service network restart so i'm not sure if it's not happening at all or what, but i don't think it's being overridden.Feb 19 19:39:03 vagrant cloud-init[647]: [CLOUDINIT] rhel.py[DEBUG]: Translated ubuntu style network settings auto eth0iface eth0 inet staticaddress 192.168.2.120netmask 255.255.255.0gateway 192.168.2.1dns-nameservers 192.168.2.1dns-search test.localinto {'eth0': {'dns-search': ['test.local'], 'auto': True, 'dns-nameservers': ['192.168.2.1'], 'netmask': '255.255.255.0', 'bootproto': 'static', 'address': '192.168.2.120', 'gateway': '192.168.2.1'}}Feb 19 19:39:03 vagrant cloud-init[647]: [CLOUDINIT] util.py[DEBUG]: Reading from /etc/sysconfig/network-scripts/ifcfg-eth0 (quiet=False) Feb 19 19:39:03 vagrant cloud-init[647]: [CLOUDINIT] util.py[DEBUG]: Read 17 bytes from /etc/sysconfig/network-scripts/ifcfg-eth0 Feb 19 19:39:03 vagrant cloud-init[647]: [CLOUDINIT] util.py[DEBUG]: Writing to /etc/sysconfig/network-scripts/ifcfg-eth0 - wb: [420] 120 bytes Feb 19 19:39:03 vagrant cloud-init[647]: [CLOUDINIT] util.py[DEBUG]: Restoring selinux mode for /etc/sysconfig/network-scripts/ifcfg-eth0 (recursive=False) Feb 19 19:39:03 vagrant cloud-init[647]: [CLOUDINIT] util.py[DEBUG]: Restoring selinux mode for /etc/sysconfig/network-scripts/ifcfg-eth0 (recursive=False) Feb 19 19:39:03 vagrant cloud-init[647]: [CLOUDINIT] util.py[DEBUG]: Reading from /etc/resolv.conf (quiet=False)Feb 19 19:39:03 vagrant cloud-init[647]: [CLOUDINIT] util.py[DEBUG]: Read 86 bytes from /etc/resolv.confFeb 19 19:39:03 vagrant cloud-init[647]: [CLOUDINIT] util.py[DEBUG]: Writing to /etc/resolv.conf - wb: [420] 109 bytesFeb 19 19:39:03 vagrant cloud-init[647]: [CLOUDINIT] util.py[DEBUG]: Restoring selinux mode for /etc/resolv.conf (recursive=False)Feb 19 19:39:03 vagrant cloud-init[647]: [CLOUDINIT] util.py[DEBUG]: Restoring selinux mode for /etc/resolv.conf (recursive=False)Feb 19 19:39:03 vagrant cloud-init[647]: [CLOUDINIT] util.py[DEBUG]: Reading from /etc/sysconfig/network (quiet=False)Feb 19 19:39:03 vagrant cloud-init[647]: [CLOUDINIT] util.py[DEBUG]: Read 53 bytes from /etc/sysconfig/networkFeb 19 19:39:03 vagrant cloud-init[647]: [CLOUDINIT] util.py[DEBUG]: Writing to /etc/sysconfig/network - wb: [420] 68 bytesFeb 19 19:39:03 vagrant cloud-init[647]: [CLOUDINIT] util.py[DEBUG]: Restoring selinux mode for /etc/sysconfig/network (recursive=False)Feb 19 19:39:03 vagrant cloud-init[647]: [CLOUDINIT] util.py[DEBUG]: Restoring selinux mode for /etc/sysconfig/network (recursive=False)On Mon, Feb 20, 2017 at 9:36 AM, Marc Young <3vilpenguin@gmail.com> wrote:Still no change...myoung dev ~ repos github vagrant-ovirt4 feature/gh65 ✎ $ vagrant upYou appear to be running Vagrant outside of the official installers.Note that the installers are what ensure that Vagrant has all requireddependencies, and Vagrant assumes that these dependencies exist. Byrunning outside of the installer environment, Vagrant may not functionproperly. To remove this warning, install Vagrant using one of theofficial packages from vagrantup.com.Bringing machine 'default' up with 'ovirt4' provider...==> default: Creating VM with the following settings...==> default: -- Name: testing==> default: -- Cluster: Default==> default: -- Template: vagrant-centos7==> default: -- Console Type: vnc==> default: -- Memory:==> default: ---- Memory: 2048 MB==> default: ---- Maximum: 2048 MB==> default: ---- Guaranteed: 2048 MB==> default: -- Cpu:==> default: ---- Cores: 2==> default: ---- Sockets: 1==> default: ---- Threads: 1==> default: -- Cloud-Init: false==> default: Waiting for VM to become "ready" to start...==> default: Starting VM.From: /home/myoung/repos/github/vagrant-ovirt4/lib/vagrant-ovirt4/ action/start_vm.rb @ line 79 VagrantPlugins::OVirtProvider: :Action::StartVM#call: 74: vm_configuration[:initialization][:dns_search] = iface_options[:dns_search] unless iface_options[:dns_search].nil ? 75:76: require 'pry'77: binding.pry78:=> 79: machine.start(80: use_cloud_init: true,81: vm: vm_configuration82: )83:84: @app.call(env)[1] pry(#<VagrantPlugins::OVirtProvider::Action::StartVM>)> vm_configuration => {:initialization=>{:host_name=>"testing",:nic_configurations=>[{:name=>"eth0", :on_boot=>true, :boot_protocol=>"static", :ip=>{:version=>"v4", :address=>"192.168.2.120", :gateway=>"192.168.2.1", :netmask=>"255.255.255.0"}}], :custom_script=>nil,:dns_servers=>"192.168.2.1",:dns_search=>"test.local"}}[2] pry(#<VagrantPlugins::OVirtProvider::Action::StartVM>)> ==> default: Waiting for VM to get an IP address...==> default: Machine is booted and ready for use!==> default: Rsyncing folder: /home/myoung/repos/github/vagrant-ovirt4/ => /vagrant ==> default: Setting hostname...default:default: Vagrant insecure key detected. Vagrant will automatically replacedefault: this with a newly generated keypair for better security.default:default: Inserting generated public key within guest...default: Removing insecure key from the guest if it's present...default: Key inserted! Disconnecting and reconnecting using new SSH key...myoung dev ~ repos github vagrant-ovirt4 feature/gh65 ✎ $ vagrant sshYou appear to be running Vagrant outside of the official installers.Note that the installers are what ensure that Vagrant has all requireddependencies, and Vagrant assumes that these dependencies exist. Byrunning outside of the installer environment, Vagrant may not functionproperly. To remove this warning, install Vagrant using one of theofficial packages from vagrantup.com.Last login: Wed Feb 15 00:23:35 2017 from 192.168.2.32[vagrant@testing ~]$ cat /etc/resolv.conf# Generated by NetworkManagersearch localdomain[vagrant@testing ~]$ cat /etc/sysconfig/network-scripts/ifcfg-eth0 NM_CONTROLLED=noNETMASK=255.255.255.0BOOTPROTO=staticDEVICE=eth0IPADDR=192.168.2.120GATEWAY=192.168.2.1ONBOOT=yesIf i check out the floppy attached to that VM:[myoung@ovirt ~]$ sudo ps -ef | grep qemu-kvm | grep test[sudo] password for myoung:qemu 24311 1 87 01:38 ? 00:00:18 .....[myoung@ovirt ~]$ sudo cp /var/run/vdsm/payload/9964609e-8d85-4a5c-9416-8e11b2fd5883.d 0d0739973bfb4b6eb67d1f4974c3e0 c.img . [myoung@ovirt ~]$ mkdir a; sudo mount -o loop,ro 9964609e-8d85-4a5c-9416-8e11b2fd5883.d0d0739973bfb4b6eb67d1f 4974c3e0c.img a [myoung@ovirt ~]$ sudo cat $(sudo find a -name 0000 -type f)auto eth0iface eth0 inet staticaddress 192.168.2.120netmask 255.255.255.0gateway 192.168.2.1dns-nameservers 192.168.2.1dns-search test.local[myoung@ovirt ~]$ sudo umount aWhat's the next step? Is there a way to verify on the upstream that dns-search and dns-nameservers actually populate the ifcfg-eth0 file ?On Sat, Feb 18, 2017 at 6:58 AM, Juan Hernández <jhernand@redhat.com> wrote:> <http://foo.example.com>\n - bar.example.comOn 02/17/2017 08:11 PM, Marc Young wrote:
> Per the script, i'll change that, probably just wasnt paying attention
> to where i ran chkconfig
>
> Per cloud-init YAML, not sure. It was in a previous reply so i gave it a
> shot. But i can't find that usage anywhere either so i gave up on it.
>
> Per troubleshooting:
>
> Spinning up a VM with dns_servers and dns_search:
>
> 66: vm_configuration[:initialization][:dns_servers] =
> iface_options[:dns_servers] unless iface_options[:dns_servers].nil?
> 67: vm_configuration[:initialization][:dns_search] =
> iface_options[:dns_search] unless iface_options[:dns_search].nil?
> 68: require 'pry'
> 69: binding.pry
> 70:
> => 71: machine.start(
> 72: use_cloud_init: true,
> 73: vm: vm_configuration
> 74: )
> 75:
> 76: @app.call(env)
>
> [1] pry(#<VagrantPlugins::OVirtProvider::Action::StartVM>)>
> vm_configuration
> => {:initialization=>
> {:host_name=>"test",
> :nic_configurations=>[{:name=>"eth0", :on_boot=>true,
> :boot_protocol=>"static", :ip=>{:version=>"v4",
> :address=>"192.168.2.200", :gateway=>"192.168.2.1",
> :netmask=>"255.255.255.0"}}],
> :custom_script=>
> "manage-resolv-conf: true\n\nresolv_conf:\n nameservers:
> ['8.8.4.4', '8.8.8.8']\n searchdomains:\n - foo.example.com
> <http://bar.example.com>\n domain: example.com
> <http://example.com>\n options:\n rotate: true\n timeout: 1\n",
> official packages from vagrantup.com <http://vagrantup.com>.> :dns_servers=>"192.168.2.1",
> :dns_search=>"test.local"}}
> [2] pry(#<VagrantPlugins::OVirtProvider::Action::StartVM>)>
> ==> default: Waiting for VM to get an IP address...
> ==> default: Machine is booted and ready for use!
> ==> default: Rsyncing folder:
> /home/myoung/repos/github/vagrant-ovirt4/ => /vagrant
> ==> default: Setting hostname...
> default:
> default: Vagrant insecure key detected. Vagrant will
> automatically replace
> default: this with a newly generated keypair for better security.
> default:
> default: Inserting generated public key within guest...
> default: Removing insecure key from the guest if it's present...
> default: Key inserted! Disconnecting and reconnecting using new
> SSH key...
>
>
> now ill ssh in and look around
>
> myoung dev ~ repos github vagrant-ovirt4
> feature/gh65 ✎ 5❓ 1 $ vagrant ssh
> You appear to be running Vagrant outside of the official installers.
> Note that the installers are what ensure that Vagrant has all required
> dependencies, and Vagrant assumes that these dependencies exist. By
> running outside of the installer environment, Vagrant may not function
> properly. To remove this warning, install Vagrant using one of the
>
> Last login: Thu Feb 16 23:04:00 2017 from 192.168.2.198
> [vagrant@test ~]$ sudo cat /var/lib/cloud/instance/user-data.txt > - foo.example.com <http://foo.example.com>
> #cloud-config
> output:
> all: '>> /var/log/cloud-init-output.log'
> disable_root: 0
> runcmd:
> - 'sed -i ''/^datasource_list: /d'' /etc/cloud/cloud.cfg; echo
> ''datasource_list:
> ["NoCloud", "ConfigDrive"]'' >> /etc/cloud/cloud.cfg'
> ssh_pwauth: true
> chpasswd:
> expire: false
> user: root
> manage-resolv-conf: true
>
> resolv_conf:
> nameservers: ['8.8.4.4', '8.8.8.8']
> searchdomains:
> - bar.example.com <http://bar.example.com>
> domain: example.com <http://example.com>
> options:
> rotate: true
> timeout: 1
Apparently you are passing in the 'custom_script' some DNS
configuration, which may conflict with the DNS configuration that you
are passing in the 'dns_servers' and 'dns_search' options. It could be
that cloud-init ignores one of them. I'd suggest that you try to remove
completely the 'custom_script' parameter.
> [vagrant@test ~]$ ping -c 3 www.google.com <http://www.google.com>
> [vagrant@test ~]$ sudo cat /etc/resolv.conf
> # Generated by NetworkManager
> search localdomain
>
> [vagrant@test ~]$ cat /etc/sysconfig/network-scripts/ifcfg-eth0
> NM_CONTROLLED=no
> NETMASK=255.255.255.0
> BOOTPROTO=static
> DEVICE=eth0
> IPADDR=192.168.2.200
> GATEWAY=192.168.2.1
> ONBOOT=yes
>
> [vagrant@test ~]$ sudo cat /var/log/cloud-init* | grep -i dns
> [vagrant@test ~]$ sudo cat /var/log/cloud-init* | grep -i local
> Feb 14 23:16:45 vagrant cloud-init: Cloud-init v. 0.7.5 running
> 'init-local' at Wed, 15 Feb 2017 05:16:45 +0000. Up 11.00 seconds.
> Feb 16 23:03:35 test cloud-init: Cloud-init v. 0.7.5 running
> 'init-local' at Fri, 17 Feb 2017 05:03:35 +0000. Up 5.23 seconds.
> Cloud-init v. 0.7.5 running 'init-local' at Thu, 09 Feb 2017
> 03:45:01 +0000. Up 1310.61 seconds.
> Cloud-init v. 0.7.5 running 'init-local' at Wed, 15 Feb 2017
> 05:16:45 +0000. Up 11.00 seconds.
> Cloud-init v. 0.7.5 running 'init-local' at Fri, 17 Feb 2017
> 05:03:35 +0000. Up 5.23 seconds.
> Cloud-init v. 0.7.5 finished at Fri, 17 Feb 2017 05:03:45 +0000.
> Datasource DataSourceConfigDrive [local,ver=2][source=/dev/sr1]. Up
> 15.37 seconds
>
>
>
> On the vm host running that VM:
>
>
> [myoung@ovirt ~]$ sudo ps -ef | grep qemu-kvm | grep test
> qemu 12456 1 9 05:03 ? 00:00:19
> /usr/libexec/qemu-kvm -name ...snipped
> [myoung@ovirt ~]$ sudo cp
> /var/run/vdsm/payload/c65751c3-431d-44e4-836c-963b81b1f846. 20fc2db0517e8c06579d7719d8f3fb 35.img
> .
> [myoung@ovirt ~]$ sudo mount -o loop,ro
> c65751c3-431d-44e4-836c-963b81b1f846.20fc2db0517e8c06579d77 19d8f3fb35.img
> /mnt
> [myoung@ovirt ~]$ find /mnt -type f
> find: ‘/mnt’: Permission denied
> [myoung@ovirt ~]$ sudo find /mnt -type f
> /mnt/openstack/content/0000
> /mnt/openstack/latest/meta_data.json
> /mnt/openstack/latest/user_data
> [myoung@ovirt ~]$ sudo cat /mnt/openstack/content/0000
> auto eth0
> iface eth0 inet static
> address 192.168.2.200
> netmask 255.255.255.0
> gateway 192.168.2.1
> dns-nameservers 192.168.2.1
> dns-search test.local
> [myoung@ovirt ~]$ sudo umount
> c65751c3-431d-44e4-836c-963b81b1f846.20fc2db0517e8c06579d77 19d8f3fb35.img
>
> Cloud-init definitely isn't working right away with resolv.conf, but I'm
> definitely passing it correctly to the API, it shows up on the floppy as
> you described but it's not making its way to
> /etc/sysconfig/network-scripts/ifcfg-eth0 even though the other settings
> for sure are (such as address, netmask,)
>
> If i add that information to /etc/sysconfig/network-scripts/ifcfg-eth0
> and bounce network it all works:
>
> ping: www.google.com <http://www.google.com>: Name or service not known
> [vagrant@test ~]$ echo $'DNS1=192.168.2.113\nDNS2=192.168.2.1' | > [vagrant@test ~]$ ping -c 3 www.google.com <http://www.google.com>
> sudo tee -a /etc/sysconfig/network-scripts/ifcfg-eth0 >/dev/null
> ping: www.google.com <http://www.google.com>: Name or service not known
> [vagrant@test ~]$ sudo service network restart
> Restarting network (via systemctl): [ OK ]
> [vagrant@test ~]$ ping -c 3 www.google.com <http://www.google.com>
> PING www.google.com <http://www.google.com> (216.58.217.4) 56(84)
> bytes of data.
> 64 bytes from den03s09-in-f4.1e100.net
> <http://den03s09-in-f4.1e100.net > (216.58.217.4): icmp_seq=1 ttl=54
> time=55.8 ms
> 64 bytes from den03s09-in-f4.1e100.net
> <http://den03s09-in-f4.1e100.net > (216.58.217.4): icmp_seq=2 ttl=54
> time=43.9 ms
> ^C
> --- www.google.com <http://www.google.com> ping statistics ---
> 2 packets transmitted, 2 received, 0% packet loss, time 1001ms
> rtt min/avg/max/mdev = 43.939/49.916/55.894/5.981 ms
> [vagrant@test ~]$ sudo cat /etc/resolv.conf
> # Generated by NetworkManager
> search localdomain
> nameserver 192.168.2.113
> nameserver 192.168.2.1
>
>
>
>
> On Fri, Feb 17, 2017 at 2:21 AM, Juan Hernández <jhernand@redhat.com
> <mailto:jhernand@redhat.com>> wrote:
>
> On 02/17/2017 06:00 AM, Marc Young wrote:
> > I'm apparently really bad at email, I replied only to Shahar, not the
> > whole thread.
> >
> > Vinzenz your email slipped first, so to answer your question:
> >
> > It's the latest Centos 7 with these installed:
> >
> > cloud-init-0.7.5-10.el7.centos.1 > > kernel-3.10.0-514 <tel:3.10.0-514> <tel:3.10.0-514
> > <http://den03s09-in-f4.1e100.> <tel:3.10.0-514>>.el7
> > ovirt-guest-agent-common-1.0.13-1.20161220085008.git165fff1. el7.centos
> >
> > The setup script I use to create a template is here:
> > https://github.com/myoung34/vagrant-ovirt4/blob/master/tools /prepare_redhat_for_box.sh
> <https://github.com/myoung34/vagrant-ovirt4/blob/master/too >ls/prepare_redhat_for_box.sh
> >
> <https://github.com/myoung34/vagrant-ovirt4/blob/master/too ls/prepare_redhat_for_box.sh
> <https://github.com/myoung34/vagrant-ovirt4/blob/master/too >>ls/prepare_redhat_for_box.sh
> >
>
> In that script you run "chkconfig cloud-init on" *before* installing the
> cloud-init package. That is irrelevant, as the cloud-init services are
> enabled by default when the package is installed. But worth changing.
>
> > The engine-host is oVirt Engine Version: 4.1.0.4-1.el7.centos
> > The ruby SDK i'm working with is 4.1.2
> >
> > Halfway through I realized that it's actually supported in the API:
> >
> > custom_script String
> > dns_search String
> > dns_servers String
> >
> >
> > It also shows usage here:
> >
> https://github.com/oVirt/ovirt-engine-sdk-ruby/blob/master/ sdk/examples/start_vm_with_clo ud_init.rb
> <https://github.com/oVirt/ovirt-engine-sdk-ruby/blob/master >/sdk/examples/start_vm_with_cl oud_init.rb
> >
> <https://github.com/oVirt/ovirt-engine-sdk-ruby/blob/master /sdk/examples/start_vm_with_cl oud_init.rb
> <https://github.com/oVirt/ovirt-engine-sdk-ruby/blob/master >>/sdk/examples/start_vm_with_cl oud_init.rb
> >
> > Here's some verification:
> >
> > 66:
> vm_configuration[:initialization][:dns_servers] =
> > iface_options[:dns_servers] unless
> iface_options[:dns_servers].nil?
> > 67: vm_configuration[:initialization][:dns_search] =
> > iface_options[:dns_search] unless iface_options[:dns_search].nil?
> > 68: require 'pry'
> > 69: binding.pry
> > 70:
> > => 71: machine.start(
> > 72: use_cloud_init: true,
> > 73: vm: vm_configuration
> > 74: )
> > 75:
> > 76: @app.call(env)
> >
> > [1] pry(#<VagrantPlugins::OVirtProvider::Action::StartVM>)>
> > vm_configuration
> > => {:initialization=>
> > {:host_name=>"test",
> > :nic_configurations=>[{:name=>"eth0", :on_boot=>true,
> > :boot_protocol=>"static", :ip=>{:version=>"v4",
> > :address=>"192.168.2.200", :gateway=>"192.168.2.1",
> > :netmask=>"255.255.255.0"}}],
> > :custom_script=>nil,
> > :dns_servers=>"192.168.2.1",
> > :dns_search=>"test.local"}}
> >
> >
> > But it didn't do anything:
> >
> > [vagrant@test ~]$ cat /etc/resolv.conf
> > # Generated by NetworkManager
> > search localdomain
> >
> > [vagrant@test ~]$ cat /etc/sysconfig/network-scripts/ifcfg-eth0
> > NM_CONTROLLED=no
> > NETMASK=255.255.255.0
> > BOOTPROTO=static
> > DEVICE=eth0
> > IPADDR=192.168.2.200
> > GATEWAY=192.168.2.1
> > ONBOOT=yes
> >
> >
> > The same is also true using cloud_init:
> >
> > ovirt.cloud_init =<<EOF
> > write_files:
> > - content: |
> > wat
> > path: /tmp/something.txt
> > permissions: '0644'
> > network-interfaces: |
> > auto eth0
> > iface eth0 inet static
> > address 192.168.2.201
> > network 192.168.2.0
> > netmask 255.255.255.0
> > gateway 192.168.2.1
> > dns-nameservers 192.168.2.113 192.168.2.1
> > EOF
> >
>
> Is this ^ supposed to work in cloud-init? I didn't find it in the
> documentation. I thought that the only way to provide network interface
> configuration is via the 'openstack/content/whatever' file within the
> generated floppy.
>
> >
> > and inspection:
> >
> > 66:
> vm_configuration[:initialization][:dns_servers] =
> > iface_options[:dns_servers] unless
> iface_options[:dns_servers].nil?
> > 67: vm_configuration[:initialization][:dns_search] =
> > iface_options[:dns_search] unless iface_options[:dns_search].nil?
> > 68: require 'pry'
> > 69: binding.pry
> > 70:
> > => 71: machine.start(
> > 72: use_cloud_init: true,
> > 73: vm: vm_configuration
> > 74: )
> > 75:
> > 76: @app.call(env)
> > [1] pry(#<VagrantPlugins::OVirtProvider::Action::StartVM>)>
> > vm_configuration
> > => {:initialization=>
> > {:host_name=>"test",
> > :nic_configurations=>[{:name=>"eth0", :on_boot=>true,
> > :boot_protocol=>"static", :ip=>{:version=>"v4",
> > :address=>"192.168.2.200", :gateway=>"192.168.2.1",
> > :netmask=>"255.255.255.0"}}],
> > :custom_script=>
> > "write_files:\n - content: |\n wat\n path:
> > /tmp/something.txt\n permissions:
> '0644'\nnetwork-interfaces: |\n
> > auto eth0\n iface eth0 inet static\n address 192.168.2.201\n
> > network 192.168.2.0\n netmask 255.255.255.0\n gateway
> > 192.168.2.1\n dns-nameservers 192.168.2.113 192.168.2.1\n",
> > :dns_servers=>"192.168.2.1",
> > :dns_search=>"test.local"}}
> >
> >
> > And here's my debugging after it comes up:
> >
> > [vagrant@test ~]$ cat /etc/resolv.conf
> > # Generated by NetworkManager
> > search localdomain
> > [vagrant@test ~]$ cat /etc/sysconfig/network-scripts/ifcfg-eth0
> > NM_CONTROLLED=no
> > NETMASK=255.255.255.0
> > BOOTPROTO=static
> > DEVICE=eth0
> > IPADDR=192.168.2.200
> > GATEWAY=192.168.2.1
> > ONBOOT=yes
> > [vagrant@test ~]$ cat /tmp/something.txt
> > wat
> > [vagrant@test ~]$ ping -c 3 www.google.com <http://www.google.com>
> > <http://www.google.com/>ping: www.google.com
> <http://www.google.com>
> > <http://www.google.com/>: Name or service not known
> > [vagrant@test ~]$ echo $'nameserver 192.168.2.113\nnameserver
> > 192.168.2.1' | sudo tee -a /etc/resolv.conf >/dev/null
> > [vagrant@test ~]$ ping -c 3 www.google.com <http://www.google.com>
> > <http://www.google.com/>PING www.google.com
> <http://www.google.com>
> > <http://www.google.com/> (216.58.217.4) 56(84) bytes of data.
> > 64 bytes from den03s09-in-f4.1e100.net
> <http://den03s09-in-f4.1e100.net >
net/
> <http://den03s09-in-f4.1e100.net/ >> (216.58.217.4): icmp_seq=1
> > ttl=54 time=47.5 ms
> > 64 bytes from den03s09-in-f4.1e100.net <http://den03s09-in-f4.1e100.net >
> > <http://den03s09-in-f4.1e100.net/
> <http://den03s09-in-f4.1e100.net/ >> (216.58.217.4): icmp_seq=2
> > ttl=54 time=46.9 ms
> > 64 bytes from den03s09-in-f4.1e100.net <http://den03s09-in-f4.1e100.net >
> > <http://den03s09-in-f4.1e100.net/
> <http://den03s09-in-f4.1e100.net/ >> (216.58.217.4): icmp_seq=3
> > ttl=54 time=44.3 ms
> > --- www.google.com <http://www.google.com>
> <http://www.google.com/> ping statistics ---
> > 3 packets transmitted, 3 received, 0% packet loss, time 2002ms
> > rtt min/avg/max/mdev = 44.385/46.307/47.555/1.390 ms
> >
>
> Not sure if you did that already, but is very useful to check the
> content of the floppy that the oVirt engine creates and attaches to the
> virtual machine. To do so run the virtual machine, then go to the
> hypervisor where it is running and locate the corresponding 'qemu-kvm'
> process:
>
> # ps -ef | grep qemu-kvm | grep myvm
>
> That will have a very long command line, and should have a 'payload'
> option that points to the generated floppy, something like this:
>
> -drive file=/var/run/vdsm/payload/ae3a9cd4-....img
>
> Copy that file somewhere, and mount it:
>
> # mount -o loop,ro that_file.img /mnt
>
> Then explore the content:
>
> # find /mnt -type f
> /mnt/openstack/content/0000
> /mnt/openstack/latest/meta_data.json
> /mnt/openstack/latest/user_data
>
> The 'openstack/content/0000' file should contain your network
> configuration. Is it what you expected?
>
> The 'openstack/latest/user_data' file should contain the cloud-init
> ocnfiguration generated by oVirt, which your custom script appended.
> Does it look correct?
>
> (Remember to "umount /mnt" when done.)
>
>
>
>
_______________________________________________
Devel mailing list
Devel@ovirt.org
http://lists.ovirt.org/mailman/listinfo/devel