I encounter that problem when I didn't configure my ansible runner as needed


Please check that your conf file (/etc/ansible-runner-service/config.yaml) is as follow:

---
version: 1

playbooks_root_dir: '/full/path/to/your/dev/engine/ovirt-engine/share/ovirt-engine/ansible-runner-service-project'
ssh_private_key: '/full/path/to/your/dev/engine/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa'
port: 50001
target_user: root


On Fri, 20 Mar 2020 at 16:48, Fedor Gavrilov <fgavrilo@redhat.com> wrote:
I just tried installing fedora 30 host with no pre-installed cockpit, just ovirt-release-master repo. Same as always:

2020-03-20 14:01:30,134+01 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engine-Thread-1) [4029908e] EVENT_ID: VDS_INSTALL_FAILED(505), Host banana installation failed. Failed to execute Ansible host-deploy role: Internal server error, please check Ansible runner error log.. Please check logs for more details: /home/apple/ovirt-engine/var/log/ovirt-engine/host-deploy/ovirt-host-deploy-ansible-20200320140129-banana-4029908e.log.

No logs as usual. The error must be on the engine side somewhere...

----- Original Message -----
From: "Fedor Gavrilov" <fgavrilo@redhat.com>
To: "Nir Soffer" <nsoffer@redhat.com>
Cc: "Liran Rotenberg" <lrotenbe@redhat.com>, "Dana Elfassy" <delfassy@redhat.com>, "devel" <devel@ovirt.org>
Sent: Thursday, March 19, 2020 4:20:23 PM
Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev package?

Thanks for the response, Nir.

>You host installed without SSH server enabled?
I've been virtualizing both engine and host vm since I joined the team, so enabling ssh access is the first thing I do after OS is installed.

>Not sure why you need cockpit.
>But you need:
>sudo dnf install
>https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm

I did install ovirt-release-master rpm on the host and somehow managed to not copy that (facepalm). But believe me it's there.
Regarding cockpit, I was following what's written in https://ovirt.org/documentation/install-guide/chap-Enterprise_Linux_Hosts.html

>Why not:
>sudo yum install
>https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm

Yum had a bug on both previous CentOS and Fedora around 28 or 29 where it would silently fail when you try installing from the URL :D

>Did you to add centos 7.7 host? 8.1?
Yesterday I tried Fedoa 30 host and just now I tried CentOS 8 host (that's the lengths I went to get this thing working!). Both fail.

>Look at the full half of the glass, you have engine.
Nice one. Though I'm afraid that part might be poisoned since host configuration that worked for me for a year now instantly fails no matter what OS is used...

Fedor

----- Original Message -----
From: "Nir Soffer" <nsoffer@redhat.com>
To: "Fedor Gavrilov" <fgavrilo@redhat.com>
Cc: "Martin Perina" <mperina@redhat.com>, "Liran Rotenberg" <lrotenbe@redhat.com>, "Dana Elfassy" <delfassy@redhat.com>, "devel" <devel@ovirt.org>
Sent: Thursday, March 19, 2020 2:31:39 AM
Subject: Re: [ovirt-devel] Re: what's up with ansible-runner-service-dev package?

On Wed, Mar 18, 2020 at 5:27 PM Fedor Gavrilov <fgavrilo@redhat.com> wrote:
>
> Wow. I did not expect that, but after clean setup the error is still there.
> I can't add fedora 30 host to fedora 30 engine.
>
> Here is a full bash history for the host machine since OS was installed:
>
> sudo yum update

Good

> sudo systemctl enable sshd

You host installed without SSH server enabled?

> sudo nmcli connection mod ens3 ipv4.addresses 192.168.111.3/24
> sudo nmcli connection mod ens3 ipv4.dns 192.168.111.1
> sudo nmcli connection mod ens3 ipv4.gateway 192.168.111.1
> sudo nmcli connection mod ens3 ipv4.method manual

You can configure the network from the installer, less painful.

> sudo vi /etc/hosts
> sudo poweroff
> sudo yum install cockpit-ovirt-dashboard
> sudo systemctl enable cockpit.socket --now

Not sure why you need cockpit.

But you need:

sudo dnf install
https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm

>
> Same for the engine machine (I was installing dependencies separetely because 1. yum bugs & 2. I was checking if versions are correct one by one):
>
> sudo yum update
> sudo systemctl enable sshd
> sudo nmcli connection mod ens3 ipv4.addresses 192.168.111.2/24
> sudo nmcli connection mod ens3 ipv4.dns 192.168.111.1
> sudo nmcli connection mod ens3 ipv4.gateway 192.168.111.1
> sudo nmcli connection mod ens3 ipv4.method manual
> sudo vi /etc/hosts
> sudo poweroff
> sudo yum install java-11-openjdk-devel
> sudo yum install java-1.8.0-openjdk-headless
> sudo yum install mailcap
> sudo yum install unzip
> sudo yum install openssl
> sudo yum install bind-utils
> sudo yum install postgresql-server
> sudo yum install postgresql
> sudo yum install postgresql-contrib
> sudo yum install python2-dateutil
> sudo yum install python3-dateutil
> sudo yum install python2-m2crypto
> sudo yum install python3-m2crypto
> sudo yum install python2-psycopg2
> sudo yum install python3-psycopg2
> sudo yum install python2-jinja2
> sudo yum install python3-jinja2
> sudo yum install python2-libxml2
> sudo yum install python3-libxml2
> sudo yum install python2-daemon
> sudo yum install python3-daemon

> wget https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
> sudo yum install ./ovirt-release-master.rpm -y

Why not:

   sudo yum install
https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm

Also, you want to instal this first - before you install other
packages, so you get packages
from ovirt dependencies.

> sudo yum install otopi
> sudo yum install python3-ovirt-setup-lib
> sudo yum install maven
> sudo yum install ansible
> sudo yum install ansible-runner-service-dev
> sudo yum install ovirt-ansible-roles
> sudo yum install ovirt-engine-metrics
> sudo yum install python3-ovirt-engine-sdk4
> sudo yum install pyflakes
> sudo yum install python-pep8
> sudo yum install python3-docker
> sudo yum install python3-isort
> sudo yum install gcc
> sudo yum install python2-devel
> sudo yum install systemd-python
> sudo yum install python-webob
> sudo yum install redhat-rpm-config
> sudo yum install scl-utils
> sudo yum install ovirt-imageio-common

Not needed, the ovirt-imageio-proxy will bring it.

> sudo yum install make
> sudo yum install python-requests
> sudo yum install python-subprocess32
> sudo alternatives --config java
> sudo yum install ovirt-engine-wildfly
> sudo yum install ovirt-engine-wildfly-overlay
> sudo vi /etc/security/limits.d/10-nofile.conf
> sudo firewall-cmd --add-port=8080/tcp --permanent
> sudo firewall-cmd --add-port=8443/tcp --permanent
> sudo firewall-cmd --add-port=8787/tcp --permanent
> sudo firewall-cmd --add-port=5432/tcp --permanent
> sudo firewall-cmd --add-port=54323/tcp --permanent
> sudo firewall-cmd --reload
> sudo postgresql-setup --initdb --unit postgresql
> sudo vi /var/lib/pgsql/data/pg_hba.conf
> sudo vi /var/lib/pgsql/data/postgresql.conf
> sudo systemctl enable postgresql --now
> sudo systemctl status postgresql
> sudo su - postgres -c "psql -d template1"
> sudo su - postgres -c "psql -d engine"

sudo -u postgres -i ?

> sudo vi /etc/ansible-runner-service/config.yaml
> sudo systemctl enable ansible-runner-service --now
> sudo systemctl status ansible-runner-service
> sudo yum install git
> mkdir ~/git && cd ~/git
> git clone git://gerrit.ovirt.org/ovirt-imageio
> git clone git://gerrit.ovirt.org/ovirt-engine
> vi ~/.bashrc
> sudo reboot
> cd ovirt-engine/
> make clean install-dev PREFIX="/home/apple/ovirt-engine" SKIP_CHECKS=1
> cd ~/git/ovirt-imageio/
> make
> cd proxy/
> make install-dev ENGINE_PREFIX=/home/apple/ovirt-engine
> ~/ovirt-engine/bin/engine-setup
> ~/ovirt-engine/bin/engine-config -s ImageProxyAddress=apple:54323
> vi ~/.bashrc
> vi ~/ovirt-engine/etc/ovirt-engine/engine.conf.d/10-setup-protocols.conf
> sudo poweroff
>
> I don't know what's wrong. It does not work.

Look at the full half of the glass, you have engine.

Did you to add centos 7.7 host? 8.1?

> ----- Original Message -----
> From: "Martin Perina" <mperina@redhat.com>
> To: "Fedor Gavrilov" <fgavrilo@redhat.com>
> Cc: "Liran Rotenberg" <lrotenbe@redhat.com>, "Dana Elfassy" <delfassy@redhat.com>, "devel" <devel@ovirt.org>
> Sent: Wednesday, March 18, 2020 3:15:15 PM
> Subject: Re: [ovirt-devel] Re: what's up with ansible-runner-service-dev package?
>
> On Wed, Mar 18, 2020 at 2:57 PM Fedor Gavrilov <fgavrilo@redhat.com> wrote:
>
> > Thanks! Wow! This bug is 1 month old today (congrats :D), I wonder why I
> > haven't got this error sooner.
> > Also, given the workaround, does that mean that ansible-lint is optional?
> >
>
> Yes, same as pep8, pyflake and other build check tools
>
> >
> > ----- Original Message -----
> > From: "Liran Rotenberg" <lrotenbe@redhat.com>
> > To: "Fedor Gavrilov" <fgavrilo@redhat.com>
> > Cc: "Dana Elfassy" <delfassy@redhat.com>, "devel" <devel@ovirt.org>
> > Sent: Wednesday, March 18, 2020 2:21:14 PM
> > Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev
> > package?
> >
> >
> >
> > On Wed, Mar 18, 2020 at 3:09 PM Fedor Gavrilov < fgavrilo@redhat.com >
> > wrote:
> >
> >
> > Ok, thanks for the reaction :)
> >
> > Getting back to the main topic, can anyone (please) try to compile the
> > engine master now?
> > That's what I get when I try to:
> >
> > [602] Don't compare to empty string
> > /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.logging/tasks/main.yml:61
> >
> > when: hosted_engine_vm_cluster_name_result.stdout | trim != ""
> >
> > [602] Don't compare to empty string
> > /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.logging/tasks/main.yml:67
> >
> > when: hosted_engine_vm_cluster_name_result.stdout | trim == "" or
> > hosted_engine_vm_cluster_name_result.stdout is undefined
> >
> > [403] Package installs should not use latest
> > /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/ovirt-collectd-package/tasks/main.yml:2
> >
> > Task/Handler: Install collectd package
> >
> > [403] Package installs should not use latest
> > /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/ovirt-collectd-package/tasks/main.yml:9
> >
> > Task/Handler: Install collectd plugins on engine
> >
> > [403] Package installs should not use latest
> > /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/ovirt-collectd-package/tasks/main.yml:19
> >
> > Task/Handler: Install collectd plugins on hosts
> >
> > [403] Package installs should not use latest
> > /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/ovirt-collectd-package/tasks/main.yml:28
> >
> > Task/Handler: Install collectd write_syslog plugin
> >
> > [303] systemctl used in place of systemd module
> > /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:14
> >
> > Task/Handler: Check if fluentd is running
> >
> > [601] Don't compare to literal True/False
> > /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:34
> >
> > - fluentd_is_running|default(false)|bool == true
> >
> > [601] Don't compare to literal True/False
> > /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:35
> >
> > changed_when: fluentd_is_running|default(false)|bool == true
> >
> > [601] Don't compare to literal True/False
> > /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:45
> >
> > - fluentd_is_running|default(false)|bool == true
> >
> > [601] Don't compare to literal True/False
> > /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:51
> >
> > when: fluentd_is_running|default(false)|bool == false
> >
> > [303] systemctl used in place of systemd module
> > /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:60
> >
> > Task/Handler: Check if rsyslog is running
> >
> > [601] Don't compare to literal True/False
> > /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:80
> >
> > - rsyslog_is_running|default(false)|bool == true
> >
> > [601] Don't compare to literal True/False
> > /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:81
> >
> > changed_when: rsyslog_is_running|default(false)|bool == true
> >
> > [601] Don't compare to literal True/False
> > /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:91
> >
> > - rsyslog_is_running|default(false)|bool == true
> >
> > [601] Don't compare to literal True/False
> > /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:97
> >
> > when: rsyslog_is_running|default(false)|bool == false
> >
> > [303] systemctl used in place of systemd module
> > /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-collectd/restart-collectd-if-needed/tasks/main.yml:100
> >
> > Task/Handler: Check if collectd is running
> >
> > [403] Package installs should not use latest
> > /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-fluentd/ovirt-fluentd-package/tasks/main.yml:2
> >
> > Task/Handler: Install fluentd package
> >
> > [403] Package installs should not use latest
> > /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-fluentd/ovirt-fluentd-package/tasks/main.yml:9
> >
> > Task/Handler: Install fluentd engine plugins
> >
> > [403] Package installs should not use latest
> > /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-fluentd/ovirt-fluentd-package/tasks/main.yml:19
> >
> > Task/Handler: Install fluentd host plugins
> >
> > [601] Don't compare to literal True/False
> > /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.ovirt-include-vars-files/tasks/main.yml:12
> >
> > when: stat_result.stat.exists == True
> >
> > [301] Commands should not change things if nothing needs doing
> > /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:2
> >
> > Task/Handler: Get ovirt_engine_fqdn
> >
> > [301] Commands should not change things if nothing needs doing
> > /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:13
> >
> > Task/Handler: Get ovirt_engine_db_name
> >
> > [301] Commands should not change things if nothing needs doing
> > /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:22
> >
> > Task/Handler: Get ovirt_engine_db_user
> >
> > [301] Commands should not change things if nothing needs doing
> > /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:31
> >
> > Task/Handler: Get ovirt_engine_history_db_name
> >
> > [301] Commands should not change things if nothing needs doing
> > /usr/share/ansible/roles/oVirt.metrics/roles/oVirt.read-local-engine-defaults/tasks/main.yml:40
> >
> > Task/Handler: Get ovirt_engine_history_db_user
> >
> > make[1]: *** [Makefile:401: validations] Error 2
> > make[1]: Leaving directory '/home/apple/git/ovirt-engine'
> > make: *** [Makefile:584: all-dev] Error 2
> >
> > An extensive lecture from ansible, but what is this even about?
> > https://bugzilla.redhat.com/show_bug.cgi?id=1804268
> >
> >
> >
> > ...
> >
> >
> > ----- Original Message -----
> > From: "Nir Soffer" < nsoffer@redhat.com >
> > To: "Fedor Gavrilov" < fgavrilo@redhat.com >
> > Cc: "Liran Rotenberg" < lrotenbe@redhat.com >, "Dana Elfassy" <
> > delfassy@redhat.com >, "devel" < devel@ovirt.org >
> > Sent: Wednesday, March 18, 2020 11:45:28 AM
> > Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev
> > package?
> >
> > On Wed, Mar 18, 2020 at 12:29 PM Fedor Gavrilov < fgavrilo@redhat.com >
> > wrote:
> > >
> > > For the time being I'm doing super careful clean installation of both
> > engine and host in hopes of getting dev env working again... results are
> > yet to be seen.
> > > What I noticed is there is no python-ovirt-engine-sdk4 in ovirt master
> > rpm for Fedora 30. Correct name for the package is
> > python3-ovirt-engine-sdk4. And more examples like that with random package
> > renamings.
> > >
> > > README definitely needs an update. If you ask me, I would rather provide
> > users with a single version (Fedora 30 only) of dev installation docs that
> > works rather than with two versions that don't.
> >
> > Please do the update.
> >
> > Hopefully you will have more luck, my last README patch was abandoned
> > after
> > it was neglected by engine maintainers.
> > https://gerrit.ovirt.org/c/106467/
> >
> > > Are there any reasons to keep CentOS 7 info there that's irrelevant now?
> >
> > It should be dropped now.
> >
> > > I can rework the docs for FC30 eventually if no one minds.
> >
> > There is already a working fedora 30 instructions in the bottom of the
> > readme. It used to
> > work when Amit added it.
> >
> > > Or, if plans are to move to CentOS 8, maybe another brave soul can do
> > that.
> > > Fedor
> > >
> > > ----- Original Message -----
> > > From: "Liran Rotenberg" < lrotenbe@redhat.com >
> > > To: "Fedor Gavrilov" < fgavrilo@redhat.com >
> > > Cc: "Dana Elfassy" < delfassy@redhat.com >, "devel" < devel@ovirt.org >
> > > Sent: Tuesday, March 17, 2020 1:13:48 PM
> > > Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev
> > package?
> > >
> > >
> > >
> > > On Tue, Mar 17, 2020 at 2:03 PM Fedor Gavrilov < fgavrilo@redhat.com >
> > wrote:
> > >
> > >
> > > I just tried installing on Fedora 30 host and error stays the same, so
> > it's probably not as OS. Might try clean setup next, what else...
> > >
> > > Liran, do you see anything of interest when you journalctl -u
> > ansible-runner-service | grep fatal ?
> > > No, we do see a trackback on the command pointing out to
> > python3.7/site-packages/runner_service/services/jobs.py
> > > But, because breakpoint that only makes things slower, I think it's
> > timing/locking issue somehow.
> > >
> > >
> > >
> > > Fedor
> > >
> > > ----- Original Message -----
> > > From: "Liran Rotenberg" < lrotenbe@redhat.com >
> > > To: "Fedor Gavrilov" < fgavrilo@redhat.com >
> > > Cc: "Martin Perina" < mperina@redhat.com >, "Dana Elfassy" <
> > delfassy@redhat.com >, "devel" < devel@ovirt.org >
> > > Sent: Tuesday, March 17, 2020 12:49:32 PM
> > > Subject: Re: [ovirt-devel] Re: what's up with ansible-runner-service-dev
> > package?
> > >
> > > On Tue, Mar 17, 2020 at 12:18 PM Fedor Gavrilov < fgavrilo@redhat.com >
> > wrote:
> > >
> > > > I tried installing python 2 versions of some dependencies in addition
> > to
> > > > python 3 (as
> > https://github.com/oVirt/ovirt-engine/blob/master/README.adoc
> > > > is not clear about it at all. on Fedora 30 default versions of these
> > > > libraries you get when not specifying python vesion in the name are
> > python
> > > > 2.)
> > > > Now error looks slightly different :'D
> > > >
> > > > 2020-03-17 11:08:27,294+01 ERROR
> > > > [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
> > > > (EE-ManagedThreadFactory-engine-Thread-1) [703ff77e] EVENT_ID:
> > > > VDS_INSTALL_FAILED(505), Host banana installation failed. Internal
> > server
> > > > error, please check Ansible runner error log..
> > > >
> > > > Everything else stays the same, host install fails almost immediately.
> > > > Does someone have any notes for Fedora 30 install they can share?
> > > >
> > > I start seeing it too:
> > > ansible-runner-service-dev-1.0.1-1.fc30.noarch
> > > python3-ansible-runner-1.3.4-2.fc30.noarch
> > > engine:
> > > http://pastebin.test.redhat.com/845373
> > > of course no ansible log..
> > > This is what journalctl show:
> > > http://pastebin.test.redhat.com/845375
> > >
> > > After doing some debugging in the engine, after setting a breakpoint in
> > > AnsibleRunnerHTTPClient.java *runPlaybook* method, passing with
> > Step-Over
> > > until the execution (lines 139-147) it does work. Without breaking point
> > > and making things slower it throws the error.
> > >
> > > >
> > > > Thanks,
> > > > Fedor
> > > >
> > > > ----- Original Message -----
> > > > From: "Fedor Gavrilov" < fgavrilo@redhat.com >
> > > > To: "Martin Perina" < mperina@redhat.com >
> > > > Cc: "Dana Elfassy" < delfassy@redhat.com >, "devel" < devel@ovirt.org
> > >
> > > > Sent: Monday, March 16, 2020 3:52:47 PM
> > > > Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev
> > > > package?
> > > >
> > > > Sorry, my bad, it was just under my nose. Systemctl is not aware of
> > > > gunicorn-3, but when I check journalctl for ansible-runner-service I
> > see
> > > > the following:
> > > >
> > > > Mar 16 15:49:55 apple systemd[1]: Started Ansible Runner Service.
> > > > Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100]
> > [2992]
> > > > [INFO] Starting gunicorn 19.9.0
> > > > Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100]
> > [2992]
> > > > [INFO] Listening at: http://127.0.0.1:50001 (2992)
> > > > Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100]
> > [2992]
> > > > [INFO] Using worker: sync
> > > > Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100]
> > [2995]
> > > > [INFO] Booting worker with pid: 2995
> > > > Mar 16 15:49:55 apple gunicorn-3[2992]: [2020-03-16 15:49:55 +0100]
> > [2997]
> > > > [INFO] Booting worker with pid: 2997
> > > > Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing local configuration
> > > > options from /etc/ansible-runner-service/config.yaml
> > > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting playbooks_root_dir
> > to
> > > >
> > /home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-service-project
> > > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting port to 50001
> > > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting target_user to root
> > > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting ssh_private_key to
> > > > /home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa
> > > > Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing runtime overrides
> > from
> > > > environment variables
> > > > Mar 16 15:49:55 apple gunicorn-3[2992]: No configuration settings
> > > > overridden
> > > > Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing local configuration
> > > > options from /etc/ansible-runner-service/config.yaml
> > > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting playbooks_root_dir
> > to
> > > >
> > /home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-service-project
> > > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting port to 50001
> > > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting target_user to root
> > > > Mar 16 15:49:55 apple gunicorn-3[2992]: - setting ssh_private_key to
> > > > /home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa
> > > > Mar 16 15:49:55 apple gunicorn-3[2992]: Analysing runtime overrides
> > from
> > > > environment variables
> > > > Mar 16 15:49:55 apple gunicorn-3[2992]: No configuration settings
> > > > overridden
> > > >
> > > > Is that any suspicious? :)
> > > >
> > > > ----- Original Message -----
> > > > From: "Martin Perina" < mperina@redhat.com >
> > > > To: "Fedor Gavrilov" < fgavrilo@redhat.com >
> > > > Cc: "Dana Elfassy" < delfassy@redhat.com >, "devel" < devel@ovirt.org
> > >
> > > > Sent: Monday, March 16, 2020 3:36:40 PM
> > > > Subject: [ovirt-devel] Re: what's up with ansible-runner-service-dev
> > > > package?
> > > >
> > > >
> > > >
> > > > On Mon, Mar 16, 2020 at 3:32 PM Fedor Gavrilov < fgavrilo@redhat.com
> > >
> > > > wrote:
> > > >
> > > >
> > > > Nothing since there is no such service (or similarly named).
> > > > Package python3-gunicorn is installed though.
> > > >
> > > > After you start ansible-runner-service service, you should see similar
> > > > logs in journalctl:
> > > >
> > > > Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01 +0100]
> > > > [1386] [INFO] Starting gunicorn 19.9.0
> > > > Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01 +0100]
> > > > [1386] [INFO] Listening at: http://127.0.0.1:50001 (1386)
> > > > Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01 +0100]
> > > > [1386] [INFO] Using worker: sync
> > > > Mar 15 15:28:01 mperina gunicorn-3[1386]: [2020-03-15 15:28:01 +0100]
> > > > [1496] [INFO] Booting worker with pid: 1496
> > > > And more if you execute some action from engine (like install new host
> > or
> > > > upgrade a host)
> > > >
> > > >
> > > >
> > > > So does that mean that something was supposed to register it as a
> > service
> > > > but did not?
> > > >
> > > > Fedor
> > > >
> > > > ----- Original Message -----
> > > > From: "Martin Perina" < mperina@redhat.com >
> > > > To: "Fedor Gavrilov" < fgavrilo@redhat.com >
> > > > Cc: "Dana Elfassy" < delfassy@redhat.com >, "devel" < devel@ovirt.org
> > >
> > > > Sent: Monday, March 16, 2020 3:13:03 PM
> > > > Subject: Re: [ovirt-devel] Re: what's up with
> > ansible-runner-service-dev
> > > > package?
> > > >
> > > > On Mon, Mar 16, 2020 at 3:10 PM Fedor Gavrilov < fgavrilo@redhat.com
> > >
> > > > wrote:
> > > >
> > > > > FC30 dev env engine indeed :) I've done this before on other OS, so
> > > > unless
> > > > > there is a blindspot somewhere in my eye it should be configured
> > fine.
> > > > >
> > > > > [apple@apple ~]$ sudo systemctl status ansible-runner-service
> > > > > ● ansible-runner-service.service - Ansible Runner Service
> > > > > Loaded: loaded
> > (/usr/lib/systemd/system/ansible-runner-service.service;
> > > > > enabled; vendor preset: disabled)
> > > > > Active: active (running) since Mon 2020-03-16 14:27:15 CET; 16min
> > ago
> > > > > Main PID: 909 (gunicorn-3)
> > > > > Tasks: 9 (limit: 4915)
> > > > > Memory: 193.4M
> > > > > CGroup: /system.slice/ansible-runner-service.service
> > > > > ├─ 909 /usr/bin/python3 /usr/bin/gunicorn-3 -b localhost:50001
> > > > > -w 2 runner_service.wsgi:application
> > > > > ├─ 965 /usr/bin/python3 /usr/bin/gunicorn-3 -b localhost:50001
> > > > > -w 2 runner_service.wsgi:application
> > > > > ├─ 973 /usr/bin/python3 /usr/bin/gunicorn-3 -b localhost:50001
> > > > > -w 2 runner_service.wsgi:application
> > > > > ├─1501 /usr/bin/python3 -s /usr/bin/ansible-playbook
> > > > > --private-key
> > > > > /home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa -i
> > > > > /home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-servi>
> > > > > ├─1512 ssh: /root/.ansible/cp/29e7064c0e [mux]
> > > > > ├─2601 /usr/bin/python3 -s /usr/bin/ansible-playbook
> > > > > --private-key
> > > > > /home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa -i
> > > > > /home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-servi>
> > > > > └─2607 ssh -C -o ControlMaster=auto -o ControlPersist=60s -o
> > > > > StrictHostKeyChecking=no -o Port=22 -o
> > > > >
> > > >
> > IdentityFile="/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa"
> >
> > > >
> > > > > -o KbdInteractiveAu>
> > > > >
> > > > > And the config:
> > > > >
> > > > > ---
> > > > > version: 1
> > > > >
> > > > > # playbooks_root_dir
> > > > > # location of the playbooks that the service will start
> > > > > playbooks_root_dir:
> > > > >
> > > >
> > '/home/apple/ovirt-engine/share/ovirt-engine/ansible-runner-service-project'
> >
> > > >
> > > > > # port
> > > > > # tcp port for the service to listen to
> > > > > port: 50001
> > > > > #
> > > > > # ip_address
> > > > > # Specific IP address to bind to
> > > > > # ip_address: '0.0.0.0'
> > > > > target_user: root
> > > > > #event_cache_size: 3
> > > > > ssh_private_key:
> > > > > '/home/apple/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa'
> > > > >
> > > > > /home/apple/ovirt-engine is where engine is dev-installed. Not sure
> > what
> > > > > else to check now...
> > > > >
> > > >
> > > > Anything strange in journalctl for gunicorn-3 service?
> > > >
> > > > >
> > > > >
> > > > > ----- Original Message -----
> > > > > From: "Martin Perina" < mperina@redhat.com >
> > > > > To: "Fedor Gavrilov" < fgavrilo@redhat.com >
> > > > > Cc: "Dana Elfassy" < delfassy@redhat.com >, "devel" <
> > devel@ovirt.org >
> > > > > Sent: Monday, March 16, 2020 2:56:59 PM
> > > > > Subject: Re: [ovirt-devel] Re: what's up with
> > ansible-runner-service-dev
> > > > > package?
> > > > >
> > > > > On Mon, Mar 16, 2020 at 2:53 PM Fedor Gavrilov < fgavrilo@redhat.com
> > >
> > > > > wrote:
> > > > >
> > > > > > Actually, it was too early for me to celebrate.
> > > > > >
> > > > > > On Fedora 30, the engine compiles and runs fine, but when I try
> > adding
> > > > > the
> > > > > > host installation fails almost immediately and I get the following
> > > > errors
> > > > > > in the engine logs:
> > > > > >
> > > > > > ERROR
> > [org.ovirt.engine.core.bll.hostdeploy.InstallVdsInternalCommand]
> > > > > > (EE-ManagedThreadFactory-engine-Thread-1) [bdc3c01] Host
> > installation
> > > > > > failed for host '6402d350-69de-4181-bfc1-50e0e79c8228', 'banana':
> > > > Failed
> > > > > to
> > > > > > execute Ansible host-deploy role: Internal server error, please
> > check
> > > > > > Ansible runner error log.. Please check logs for more details:
> > > > > >
> > > > >
> > > >
> > /home/apple/ovirt-engine/var/log/ovirt-engine/host-deploy/ovirt-host-deploy-ansible-20200316144056-banana-bdc3c01.log
> >
> > > >
> > > > > >
> > > > > > There is nothing else. There is no file
> > > > > >
> > > > >
> > > >
> > /home/apple/ovirt-engine/var/log/ovirt-engine/host-deploy/ovirt-host-deploy-ansible-20200316144056-banana-bdc3c01.log
> >
> > > >
> > > > > > Snapshot I'm using for the host is the same that worked just fine
> > when
> > > > > > engine was running on CentOS 7 and is CentOS 7 itself. Is that an
> > > > issue?
> > > > > >
> > > > >
> > > > > As you mentioned building engine I assume you are using engine in
> > dev
> > > > env
> > > > > on FC30, right? If so, have you manually configured
> > > > ansible-runner-service
> > > > > for dev env as mentioned in
> > > > >
> > > > >
> > > >
> > https://github.com/oVirt/ovirt-engine/blob/master/README.adoc#ansible-runner-service-configration
> > > > > ?
> > > > >
> > > > >
> > > > > > Thanks,
> > > > > > Fedor
> > > > > >
> > > > > > ----- Original Message -----
> > > > > > From: "Fedor Gavrilov" < fgavrilo@redhat.com >
> > > > > > To: "Martin Perina" < mperina@redhat.com >
> > > > > > Cc: "Dana Elfassy" < delfassy@redhat.com >, "devel" <
> > devel@ovirt.org
> > > > >
> > > > > > Sent: Monday, March 16, 2020 12:37:44 PM
> > > > > > Subject: [ovirt-devel] Re: what's up with
> > ansible-runner-service-dev
> > > > > > package?
> > > > > >
> > > > > > Hi,
> > > > > >
> > > > > > Resolved through installing engine on Fedora 30. From what I
> > > > understand,
> > > > > > CentOS 7 is not supported anymore.
> > > > > >
> > > > > > Fedor
> > > > > >
> > > > > > ----- Original Message -----
> > > > > > From: "Martin Perina" < mperina@redhat.com >
> > > > > > To: "Fedor Gavrilov" < fgavrilo@redhat.com >
> > > > > > Cc: "Benny Zlotnik" < bzlotnik@redhat.com >, "Dana Elfassy" <
> > > > > > delfassy@redhat.com >, "devel" < devel@ovirt.org >, "Eyal
> > Shenitzky"
> > > > <
> > > > > > eshenitz@redhat.com >
> > > > > > Sent: Monday, March 16, 2020 8:11:35 AM
> > > > > > Subject: Re: [ovirt-devel] Re: what's up with
> > > > ansible-runner-service-dev
> > > > > > package?
> > > > > >
> > > > > > Hi Fedor,
> > > > > >
> > > > > > ansible-runner-service-dev package is available from
> > > > > >
> > > > > >
> > > > >
> > > >
> > https://copr-be.cloud.fedoraproject.org/results/ondramachacek/ansible-runner-service/
> > > > > > repos which is included in ovirt-master-release package, which
> > > > > > includes all repositories necessary for oVirt development:
> > > > > > https://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
> > > > > >
> > > > > > Was your issue resolved or not?
> > > > > >
> > > > > > Regards,
> > > > > > Martin
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > On Thu, Mar 12, 2020 at 9:30 AM Eyal Shenitzky <
> > eshenitz@redhat.com
> > > > >
> > > > > > wrote:
> > > > > >
> > > > > > > Adding also +Dana Elfassy < delfassy@redhat.com >
> > > > > > >
> > > > > > > On Wed, 11 Mar 2020 at 15:12, Benny Zlotnik <
> > bzlotnik@redhat.com >
> > > > > wrote:
> > > > > > >
> > > > > > >> ansible-runner was added in 4.4, you shouldn't need in 4.3
> > > > > > >>
> > > > > > >> On Wed, Mar 11, 2020 at 1:58 PM Fedor Gavrilov <
> > > > fgavrilo@redhat.com >
> > > > > > >> wrote:
> > > > > > >> >
> > > > > > >> > Hi Sandro,
> > > > > > >> >
> > > > > > >> > Thanks for the suggestion, but it seems to not help much.
> > > > > > >> >
> > > > > > >> > ansible-runner-service-dev still can't be found, I checked
> > repos
> > > > > that
> > > > > > >> are installed from
> > > > > > >>
> > > > https://resources.ovirt.org/pub/yum-repo/ovirt-release43-snapshot.rpm
> > > > > > >> and haven't found similarly names packages either...
> > > > > > >> >
> > > > > > >> > $ sudo yum install ansible-runner-service-dev
> > > > > > >> > Loaded plugins: fastestmirror
> > > > > > >> > Repository centos-sclo-rh-release is listed more than once in
> > the
> > > > > > >> configuration
> > > > > > >> > Repository sac-gluster-ansible is listed more than once in
> > the
> > > > > > >> configuration
> > > > > > >> > Determining fastest mirrors
> > > > > > >> > ovirt-4.3-epel/x86_64/metalink
> > > > > > >>
> > > > > > >> | 30 kB 00:00:00
> > > > > > >> > ovirt-master-epel/x86_64/metalink
> > > > > > >>
> > > > > > >> | 30 kB 00:00:00
> > > > > > >> > * base: ftp.sh.cvut.cz
> > > > > > >> > * centos-sclo-rh: ftp.sh.cvut.cz
> > > > > > >> > * centos-sclo-sclo: ftp.sh.cvut.cz
> > > > > > >> > * extras: ftp.sh.cvut.cz
> > > > > > >> > * ovirt-4.3-epel: mirror.karneval.cz
> > > > > > >> > * ovirt-4.3-snapshot: ftp.plusline.net
> > > > > > >> > * ovirt-4.3-snapshot-static: ftp.plusline.net
> > > > > > >> > * ovirt-master-epel: mirror.karneval.cz
> > > > > > >> > * ovirt-master-snapshot: ftp.plusline.net
> > > > > > >> > * ovirt-master-snapshot-static: ftp.plusline.net
> > > > > > >> > * updates: ftp.sh.cvut.cz
> > > > > > >> > base
> > > > > > >>
> > > > > > >> | 3.6 kB 00:00:00
> > > > > > >> > centos-opstools-release
> > > > > > >>
> > > > > > >> | 2.9 kB 00:00:00
> > > > > > >> > centos-ovirt-common-testing
> > > > > > >>
> > > > > > >> | 3.4 kB 00:00:00
> > > > > > >> > centos-ovirt44-testing
> > > > > > >>
> > > > > > >> | 3.4 kB 00:00:00
> > > > > > >> > centos-qemu-ev-release
> > > > > > >>
> > > > > > >> | 3.4 kB 00:00:00
> > > > > > >> > centos-sclo-rh
> > > > > > >>
> > > > > > >> | 3.0 kB 00:00:00
> > > > > > >> > centos-sclo-rh-release
> > > > > > >>
> > > > > > >> | 3.0 kB 00:00:00
> > > > > > >> > centos-sclo-sclo
> > > > > > >>
> > > > > > >> | 2.9 kB 00:00:00
> > > > > > >> > epel-apache-maven
> > > > > > >>
> > > > > > >> | 3.3 kB 00:00:00
> > > > > > >> > extras
> > > > > > >>
> > > > > > >> | 2.9 kB 00:00:00
> > > > > > >> > ovirt-4.3-centos-gluster6
> > > > > > >>
> > > > > > >> | 2.9 kB 00:00:00
> > > > > > >> > ovirt-4.3-centos-opstools
> > > > > > >>
> > > > > > >> | 2.9 kB 00:00:00
> > > > > > >> > ovirt-4.3-centos-ovirt43
> > > > > > >>
> > > > > > >> | 2.9 kB 00:00:00
> > > > > > >> > ovirt-4.3-centos-qemu-ev
> > > > > > >>
> > > > > > >> | 2.9 kB 00:00:00
> > > > > > >> > ovirt-4.3-epel
> > > > > > >>
> > > > > > >> | 5.3 kB 00:00:00
> > > > > > >> > ovirt-4.3-snapshot
> > > > > > >>
> > > > > > >> | 3.0 kB 00:00:00
> > > > > > >> > ovirt-4.3-snapshot-static
> > > > > > >>
> > > > > > >> | 3.0 kB 00:00:00
> > > > > > >> > ovirt-4.3-virtio-win-latest
> > > > > > >>
> > > > > > >> | 3.0 kB 00:00:00
> > > > > > >> > ovirt-master-centos-gluster6
> > > > > > >>
> > > > > > >> | 2.9 kB 00:00:00
> > > > > > >> > ovirt-master-centos-opstools-testing
> > > > > > >>
> > > > > > >> | 2.9 kB 00:00:00
> > > > > > >> > ovirt-master-epel
> > > > > > >>
> > > > > > >> | 5.3 kB 00:00:00
> > > > > > >> > ovirt-master-snapshot
> > > > > > >>
> > > > > > >> | 3.0 kB 00:00:00
> > > > > > >> > ovirt-master-snapshot-static
> > > > > > >>
> > > > > > >> | 3.0 kB 00:00:00
> > > > > > >> > ovirt-master-virtio-win-latest
> > > > > > >>
> > > > > > >> | 3.0 kB 00:00:00
> > > > > > >> > ovirtwebui-ovirt-web-ui-master
> > > > > > >>
> > > > > > >> | 3.0 kB 00:00:00
> > > > > > >> > sac-gluster-ansible
> > > > > > >>
> > > > > > >> | 3.3 kB 00:00:00
> > > > > > >> > updates
> > > > > > >>
> > > > > > >> | 2.9 kB 00:00:00
> > > > > > >> > (1/32): base/7/x86_64/group_gz
> > > > > > >>
> > > > > > >> | 165 kB 00:00:00
> > > > > > >> > (2/32): base/7/x86_64/primary_db
> > > > > > >>
> > > > > > >> | 6.0 MB 00:00:00
> > > > > > >> > (3/32): centos-sclo-rh/x86_64/primary_db
> > > > > > >>
> > > > > > >> | 4.2 MB 00:00:00
> > > > > > >> > (4/32): centos-qemu-ev-release/x86_64/primary_db
> > > > > > >>
> > > > > > >> | 9.3 kB 00:00:00
> > > > > > >> > (5/32): centos-sclo-sclo/x86_64/primary_db
> > > > > > >>
> > > > > > >> | 344 kB 00:00:00
> > > > > > >> > (6/32): centos-ovirt44-testing/x86_64/primary_db
> > > > > > >>
> > > > > > >> | 1.1 kB 00:00:01
> > > > > > >> > (7/32): extras/7/x86_64/primary_db
> > > > > > >>
> > > > > > >> | 164 kB 00:00:00
> > > > > > >> > (8/32): centos-opstools-release/x86_64/primary_db
> > > > > > >>
> > > > > > >> | 429 kB 00:00:01
> > > > > > >> > (9/32): centos-ovirt-common-testing/x86_64/primary_db
> > > > > > >>
> > > > > > >> | 101 kB 00:00:01
> > > > > > >> > (10/32): ovirt-4.3-centos-gluster6/x86_64/primary_db
> > > > > > >>
> > > > > > >> | 116 kB 00:00:00
> > > > > > >> > (11/32): ovirt-4.3-centos-qemu-ev/x86_64/primary_db
> > > > > > >>
> > > > > > >> | 73 kB 00:00:00
> > > > > > >> > (12/32): ovirt-4.3-epel/x86_64/group_gz
> > > > > > >>
> > > > > > >> | 90 kB 00:00:00
> > > > > > >> > (13/32): epel-apache-maven/x86_64/primary_db
> > > > > > >>
> > > > > > >> | 5.0 kB 00:00:01
> > > > > > >> > (14/32): ovirt-4.3-epel/x86_64/updateinfo
> > > > > > >>
> > > > > > >> | 1.0 MB 00:00:00
> > > > > > >> > (15/32): ovirt-4.3-centos-opstools/x86_64/primary_db
> > > > > > >>
> > > > > > >> | 429 kB 00:00:00
> > > > > > >> > (16/32): ovirt-4.3-centos-ovirt43/x86_64/primary_db
> > > > > > >>
> > > > > > >> | 211 kB 00:00:00
> > > > > > >> > (17/32): ovirt-4.3-snapshot-static/7/primary_db
> > > > > > >>
> > > > > > >> | 3.4 kB 00:00:00
> > > > > > >> > (18/32): ovirt-4.3-snapshot/7/primary_db
> > > > > > >>
> > > > > > >> | 109 kB 00:00:00
> > > > > > >> > (19/32): ovirt-master-centos-gluster6/x86_64/primary_db
> > > > > > >>
> > > > > > >> | 116 kB 00:00:00
> > > > > > >> > (20/32): ovirt-4.3-epel/x86_64/primary_db
> > > > > > >>
> > > > > > >> | 6.7 MB 00:00:00
> > > > > > >> > (21/32): ovirt-master-epel/x86_64/group_gz
> > > > > > >>
> > > > > > >> | 90 kB 00:00:00
> > > > > > >> > (22/32): ovirt-master-epel/x86_64/updateinfo
> > > > > > >>
> > > > > > >> | 1.0 MB 00:00:00
> > > > > > >> > (23/32): ovirt-master-snapshot/7/primary_db
> > > > > > >>
> > > > > > >> | 54 kB 00:00:00
> > > > > > >> > (24/32): ovirt-4.3-virtio-win-latest/primary_db
> > > > > > >>
> > > > > > >> | 7.6 kB 00:00:01
> > > > > > >> > (25/32): ovirt-master-snapshot-static/7/primary_db
> > > > > > >>
> > > > > > >> | 4.6 kB 00:00:00
> > > > > > >> > (26/32): ovirt-master-epel/x86_64/primary_db
> > > > > > >>
> > > > > > >> | 6.7 MB 00:00:00
> > > > > > >> > (27/32): ovirt-master-virtio-win-latest/primary_db
> > > > > > >>
> > > > > > >> | 7.6 kB 00:00:00
> > > > > > >> > (28/32): centos-sclo-rh-release/x86_64/primary_db
> > > > > > >>
> > > > > > >> | 4.2 MB 00:00:03
> > > > > > >> > (29/32): updates/7/x86_64/primary_db
> > > > > > >>
> > > > > > >> | 6.7 MB 00:00:00
> > > > > > >> > (30/32):
> > ovirt-master-centos-opstools-testing/x86_64/primary_db
> > > > > > >>
> > > > > > >> | 611 kB 00:00:01
> > > > > > >> > (31/32): ovirtwebui-ovirt-web-ui-master/x86_64/primary_db
> > > > > > >>
> > > > > > >> | 2.3 kB 00:00:00
> > > > > > >> > (32/32): sac-gluster-ansible/x86_64/primary_db
> > > > > > >>
> > > > > > >> | 13 kB 00:00:00
> > > > > > >> > No package ansible-runner-service-dev available.
> > > > > > >> > Error: Nothing to do
> > > > > > >> >
> > > > > > >> >
> > > > > > >> > Fedor
> > > > > > >> >
> > > > > > >> > ----- Original Message -----
> > > > > > >> > From: "Sandro Bonazzola" < sbonazzo@redhat.com >
> > > > > > >> > To: "Fedor Gavrilov" < fgavrilo@redhat.com >
> > > > > > >> > Cc: "Eyal Shenitzky" < eshenitz@redhat.com >, "devel" <
> > > > > devel@ovirt.org >
> > > > > > >> > Sent: Tuesday, March 10, 2020 5:56:53 PM
> > > > > > >> > Subject: Re: [ovirt-devel] Re: what's up with
> > > > > > >> ansible-runner-service-dev package?
> > > > > > >> >
> > > > > > >> > Il giorno mar 10 mar 2020 alle ore 15:39 Fedor Gavrilov <
> > > > > > >> fgavrilo@redhat.com >
> > > > > > >> > ha scritto:
> > > > > > >> >
> > > > > > >> > > Thanks for the response, Eyal!
> > > > > > >> > >
> > > > > > >> > > I already had ovirt-master repo installed, but updated
> > > > everything
> > > > > > >> just in
> > > > > > >> > > case.
> > > > > > >> > > I even tried both yum and dnf (since yum on centos was
> > giving
> > > > me
> > > > > > lots
> > > > > > >> of
> > > > > > >> > > grief before and I learned their behaviour differs,
> > especially
> > > > > when
> > > > > > it
> > > > > > >> > > comes to bugs) but none works...
> > > > > > >> > >
> > > > > > >> > > >No package ansible-runner-service-dev available.
> > > > > > >> > > >No match for argument: ansible-runner-service-dev
> > > > > > >> > >
> > > > > > >> > > Fedor
> > > > > > >> > >
> > > > > > >> > >
> > > > > > >> > Looks like you're trying to install ovirt-master-snapshot on
> > el7.
> > > > > > >> > It won't work.
> > > > > > >> > Master is not supporting el7 anymore.
> > > > > > >> > You can use 4.3 snapshot rpm at :
> > > > > > >> >
> > > > >
> > https://resources.ovirt.org/pub/yum-repo/ovirt-release43-snapshot.rpm
> > > > > > >> if
> > > > > > >> > you need to stay on el7.
> > > > > > >> >
> > > > > > >> >
> > > > > > >> > > ----- Original Message -----
> > > > > > >> > > From: "Eyal Shenitzky" < eshenitz@redhat.com >
> > > > > > >> > > To: "Fedor Gavrilov" < fgavrilo@redhat.com >
> > > > > > >> > > Cc: "devel" < devel@ovirt.org >
> > > > > > >> > > Sent: Tuesday, March 10, 2020 2:24:16 PM
> > > > > > >> > > Subject: Re: [ovirt-devel] what's up with
> > > > > ansible-runner-service-dev
> > > > > > >> > > package?
> > > > > > >> > >
> > > > > > >> > > Hi Fedor,
> > > > > > >> > >
> > > > > > >> > > Please try:
> > > > > > >> > > 1. dnf install
> > > > > > >> > >
> > > > http://resources.ovirt.org/pub/yum-repo/ovirt-release-master.rpm
> > > > > > >> > > 2. dnf update
> > > > > > >> > > 3. dnf install ansible-runner-service-dev
> > > > > > >> > > 4. flow the instruction from thread 'New dependency for
> > > > > development
> > > > > > >> > > environment'
> > > > > > >> > > The
> > > > > > >> > >
> > > > > > >> > > On Tue, 10 Mar 2020 at 14:55, Fedor Gavrilov <
> > > > fgavrilo@redhat.com
> > > > > >
> > > > > > >> wrote:
> > > > > > >> > >
> > > > > > >> > > > Hi everyone,
> > > > > > >> > > >
> > > > > > >> > > > After I screwed up my dev environment beyond repair I
> > have to
> > > > > set
> > > > > > >> it up
> > > > > > >> > > > again and I see something I haven't last time (CentOS 7):
> > > > > > >> > > >
> > > > > > >> > > > $ sudo yum install ansible-runner-service-dev
> > > > > > >> > > > Loaded plugins: fastestmirror
> > > > > > >> > > > Loading mirror speeds from cached hostfile
> > > > > > >> > > > * base: mirror.hosting90.cz
> > > > > > >> > > > * centos-sclo-rh: mirror.hosting90.cz
> > > > > > >> > > > * centos-sclo-sclo: mirror.hosting90.cz
> > > > > > >> > > > * extras: mirror.hosting90.cz
> > > > > > >> > > > * ovirt-master-epel: mirror.hosting90.cz
> > > > > > >> > > > * ovirt-master-snapshot: ftp.nluug.nl
> > > > > > >> > > > * ovirt-master-snapshot-static: ftp.nluug.nl
> > > > > > >> > > > * updates: mirror.hosting90.cz
> > > > > > >> > > > No package ansible-runner-service-dev available.
> > > > > > >> > > >
> > > > > > >> > > > Maybe something's missing from my notes, but where did it
> > go?
> > > > > > >> Should I
> > > > > > >> > > add
> > > > > > >> > > > some repo?
> > > > > > >> > > >
> > > > > > >> > > > Fedor
> > > > > > >> > > > _______________________________________________
> > > > > > >> > > > Devel mailing list -- devel@ovirt.org
> > > > > > >> > > > To unsubscribe send an email to devel-leave@ovirt.org
> > > > > > >> > > > Privacy Statement:
> > https://www.ovirt.org/privacy-policy.html
> > > > > > >> > > > oVirt Code of Conduct:
> > > > > > >> > > >
> > https://www.ovirt.org/community/about/community-guidelines/
> > > > > > >> > > > List Archives:
> > > > > > >> > > >
> > > > > > >> > >
> > > > > > >>
> > > > > >
> > > > >
> > > >
> > https://lists.ovirt.org/archives/list/devel@ovirt.org/message/3KH5INHYMY3IROMSBEKGFWEOSA7NJ4K2/
> > > > > > >> > > >
> > > > > > >> > >
> > > > > > >> > >
> > > > > > >> > > --
> > > > > > >> > > Regards,
> > > > > > >> > > Eyal Shenitzky
> > > > > > >> > > _______________________________________________
> > > > > > >> > > Devel mailing list -- devel@ovirt.org
> > > > > > >> > > To unsubscribe send an email to devel-leave@ovirt.org
> > > > > > >> > > Privacy Statement:
> > https://www.ovirt.org/privacy-policy.html
> > > > > > >> > > oVirt Code of Conduct:
> > > > > > >> > > https://www.ovirt.org/community/about/community-guidelines/
> > > > > > >> > > List Archives:
> > > > > > >> > >
> > > > > > >>
> > > > > >
> > > > >
> > > >
> > https://lists.ovirt.org/archives/list/devel@ovirt.org/message/52BHRXMZGSVFXEALXWGSDGDFJACHNTDI/
> > > > > > >> > >
> > > > > > >> >
> > > > > > >> >
> > > > > > >> > --
> > > > > > >> >
> > > > > > >> > Sandro Bonazzola
> > > > > > >> >
> > > > > > >> > MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV
> > > > > > >> >
> > > > > > >> > Red Hat EMEA < https://www.redhat.com/ >
> > > > > > >> >
> > > > > > >> > sbonazzo@redhat.com
> > > > > > >> > < https://www.redhat.com/ >*Red Hat respects your work life
> > > > balance.
> > > > > > >> > Therefore there is no need to answer this email out of your
> > > > office
> > > > > > >> hours.
> > > > > > >> > < https://mojo.redhat.com/docs/DOC-1199578 >*
> > > > > > >> > _______________________________________________
> > > > > > >> > Devel mailing list -- devel@ovirt.org
> > > > > > >> > To unsubscribe send an email to devel-leave@ovirt.org
> > > > > > >> > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > > > > > >> > oVirt Code of Conduct:
> > > > > > >> https://www.ovirt.org/community/about/community-guidelines/
> > > > > > >> > List Archives:
> > > > > > >>
> > > > > >
> > > > >
> > > >
> > https://lists.ovirt.org/archives/list/devel@ovirt.org/message/26DWVGS47ANIF2X6RGU4OAMKH23M23SP/
> > > > > > >> _______________________________________________
> > > > > > >> Devel mailing list -- devel@ovirt.org
> > > > > > >> To unsubscribe send an email to devel-leave@ovirt.org
> > > > > > >> Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > > > > > >> oVirt Code of Conduct:
> > > > > > >> https://www.ovirt.org/community/about/community-guidelines/
> > > > > > >> List Archives:
> > > > > > >>
> > > > > >
> > > > >
> > > >
> > https://lists.ovirt.org/archives/list/devel@ovirt.org/message/CLZ6L4VZCG3IQRMADBKOHTTL43FMNX47/
> > > > > > >>
> > > > > > >
> > > > > > >
> > > > > > > --
> > > > > > > Regards,
> > > > > > > Eyal Shenitzky
> > > > > > > _______________________________________________
> > > > > > > Devel mailing list -- devel@ovirt.org
> > > > > > > To unsubscribe send an email to devel-leave@ovirt.org
> > > > > > > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > > > > > > oVirt Code of Conduct:
> > > > > > > https://www.ovirt.org/community/about/community-guidelines/
> > > > > > > List Archives:
> > > > > > >
> > > > > >
> > > > >
> > > >
> > https://lists.ovirt.org/archives/list/devel@ovirt.org/message/4SY64VTL7ALS27OSWVLJQAVDWLV6H5RJ/
> > > > > > >
> > > > > >
> > > > > >
> > > > > > --
> > > > > > Martin Perina
> > > > > > Manager, Software Engineering
> > > > > > Red Hat Czech s.r.o.
> > > > > > _______________________________________________
> > > > > > Devel mailing list -- devel@ovirt.org
> > > > > > To unsubscribe send an email to devel-leave@ovirt.org
> > > > > > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > > > > > oVirt Code of Conduct:
> > > > > > https://www.ovirt.org/community/about/community-guidelines/
> > > > > > List Archives:
> > > > > >
> > > > >
> > > >
> > https://lists.ovirt.org/archives/list/devel@ovirt.org/message/VJOHBN5RHFQ7TREJSGWNMQS7YCL2OMCX/
> > > > > >
> > > > > >
> > > > >
> > > > > --
> > > > > Martin Perina
> > > > > Manager, Software Engineering
> > > > > Red Hat Czech s.r.o.
> > > > >
> > > > >
> > > >
> > > > --
> > > > Martin Perina
> > > > Manager, Software Engineering
> > > > Red Hat Czech s.r.o.
> > > >
> > > >
> > > >
> > > > --
> > > > Martin Perina
> > > > Manager, Software Engineering
> > > > Red Hat Czech s.r.o.
> > > >
> > > > _______________________________________________
> > > > Devel mailing list -- devel@ovirt.org
> > > > To unsubscribe send an email to devel-leave@ovirt.org
> > > > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > > > oVirt Code of Conduct:
> > > > https://www.ovirt.org/community/about/community-guidelines/
> > > > List Archives:
> > > >
> > https://lists.ovirt.org/archives/list/devel@ovirt.org/message/XUSAKMZHVN74IG2XGHKWNJQR2X2KLCG7/
> > > > _______________________________________________
> > > > Devel mailing list -- devel@ovirt.org
> > > > To unsubscribe send an email to devel-leave@ovirt.org
> > > > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > > > oVirt Code of Conduct:
> > > > https://www.ovirt.org/community/about/community-guidelines/
> > > > List Archives:
> > > >
> > https://lists.ovirt.org/archives/list/devel@ovirt.org/message/6XPXETA6PNC46WRX3BNCYVJE6QD22XTG/
> > > > _______________________________________________
> > > > Devel mailing list -- devel@ovirt.org
> > > > To unsubscribe send an email to devel-leave@ovirt.org
> > > > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > > > oVirt Code of Conduct:
> > > > https://www.ovirt.org/community/about/community-guidelines/
> > > > List Archives:
> > > >
> > https://lists.ovirt.org/archives/list/devel@ovirt.org/message/LOAF7RE5TSZHORBKKS4TRX7MSYQ6XWHZ/
> > > >
> > >
> > >
> > > _______________________________________________
> > > Devel mailing list -- devel@ovirt.org
> > > To unsubscribe send an email to devel-leave@ovirt.org
> > > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > > oVirt Code of Conduct:
> > https://www.ovirt.org/community/about/community-guidelines/
> > > List Archives:
> > https://lists.ovirt.org/archives/list/devel@ovirt.org/message/GBTKNRVPN6FT4VNNZ4FO3L7ZRQQIAOO7/
> > > _______________________________________________
> > > Devel mailing list -- devel@ovirt.org
> > > To unsubscribe send an email to devel-leave@ovirt.org
> > > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > > oVirt Code of Conduct:
> > https://www.ovirt.org/community/about/community-guidelines/
> > > List Archives:
> > https://lists.ovirt.org/archives/list/devel@ovirt.org/message/FVXUOQAVVHJEN7L2ISDKS4MWF6Y2KJNF/
> > _______________________________________________
> > Devel mailing list -- devel@ovirt.org
> > To unsubscribe send an email to devel-leave@ovirt.org
> > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > oVirt Code of Conduct:
> > https://www.ovirt.org/community/about/community-guidelines/
> > List Archives:
> > https://lists.ovirt.org/archives/list/devel@ovirt.org/message/L4654P3ZUVF2HXOFFFL7STLMYJMNAVYR/
> >
> >
> > _______________________________________________
> > Devel mailing list -- devel@ovirt.org
> > To unsubscribe send an email to devel-leave@ovirt.org
> > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > oVirt Code of Conduct:
> > https://www.ovirt.org/community/about/community-guidelines/
> > List Archives:
> > https://lists.ovirt.org/archives/list/devel@ovirt.org/message/DGT7TW4B5X7EUJM4XI7VOOGJN52RGJIB/
> > _______________________________________________
> > Devel mailing list -- devel@ovirt.org
> > To unsubscribe send an email to devel-leave@ovirt.org
> > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > oVirt Code of Conduct:
> > https://www.ovirt.org/community/about/community-guidelines/
> > List Archives:
> > https://lists.ovirt.org/archives/list/devel@ovirt.org/message/K2BTKQFTJVCQISSVKSTTHIQB7KRMWAZW/
> >
>
>
> --
> Martin Perina
> Manager, Software Engineering
> Red Hat Czech s.r.o.
> _______________________________________________
> Devel mailing list -- devel@ovirt.org
> To unsubscribe send an email to devel-leave@ovirt.org
> Privacy Statement: https://www.ovirt.org/privacy-policy.html
> oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
> List Archives: https://lists.ovirt.org/archives/list/devel@ovirt.org/message/Z7TKYPARKUQ3IIYSPKI2JLX4VATB3P56/
_______________________________________________
Devel mailing list -- devel@ovirt.org
To unsubscribe send an email to devel-leave@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives: https://lists.ovirt.org/archives/list/devel@ovirt.org/message/J6WYKCHUBP5F4FKHXIUPLSMQDEHU6HRD/
_______________________________________________
Devel mailing list -- devel@ovirt.org
To unsubscribe send an email to devel-leave@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives: https://lists.ovirt.org/archives/list/devel@ovirt.org/message/46N4CS3HJTJCJHHBPKMHRJYNUS6OYGO3/


--
Regards,
Eyal Shenitzky