On Sep 29, 2016 10:28 AM, "Evgheni Dereveanchin" <ederevea@redhat.com> wrote:
>
> Hi,
>
> Indeed the proposed dd test does not work on zRAM slaves.
> Can we modify the job not to run on nodes with ram_disk label?

Are those zram based or ram based *virtio-blk* disks,  or zram/ram disks within the VMs?
The former should work. The latter -  no idea.

>
> The node will be offline for now until we agree on what to do.
> An option is to abandon RAM disks completely as we didn't find
> any performance benefits from using them so far.

That's very surprising. On my case it doubles the performance,  at least. But I assume my storage (single disk) is far slower than yours.
Y.

>
> Regards,
> Evgheni Dereveanchin
>
> ----- Original Message -----
> From: "Eyal Edri" <eedri@redhat.com>
> To: "Nir Soffer" <nsoffer@redhat.com>, "Evgheni Dereveanchin" <ederevea@redhat.com>
> Cc: "Yaniv Kaul" <ykaul@redhat.com>, "devel" <devel@ovirt.org>, "infra" <infra@ovirt.org>
> Sent: Thursday, 29 September, 2016 8:08:45 AM
> Subject: Re: [ovirt-devel] [VDSM] All tests using directio fail on CI
>
> Evgheni,
> Can you try switching the current RAM drive with zram?
>
> On Wed, Sep 28, 2016 at 11:43 PM, Nir Soffer <nsoffer@redhat.com> wrote:
>
> > On Wed, Sep 28, 2016 at 11:39 PM, Yaniv Kaul <ykaul@redhat.com> wrote:
> > > On Sep 28, 2016 11:37 PM, "Nir Soffer" <nsoffer@redhat.com> wrote:
> > >>
> > >> On Wed, Sep 28, 2016 at 11:20 PM, Nir Soffer <nsoffer@redhat.com>
> > wrote:
> > >> > On Wed, Sep 28, 2016 at 10:31 PM, Barak Korren <bkorren@redhat.com>
> > >> > wrote:
> > >> >> The CI setup did not change recently.
> > >> >
> > >> > Great
> > >> >
> > >> >> All standard-CI jobs run inside mock (chroot) which is stored on top
> > >> >> of a regular FS, so they should not be affected by the slave OS at
> > all
> > >> >> as far as FS settings go.
> > >> >>
> > >> >> But perhaps some slave-OS/mock-OS combination is acting strangely, so
> > >> >> could you be more specific and point to particular job runs that
> > fail?
> > >> >
> > >> > This jobs failed, but it was deleted (I get 404 now):
> > >> > http://jenkins.ovirt.org/job/vdsm_master_check-patch-fc24-
> > x86_64/2530/
> > >>
> > >> Oops, wrong build.
> > >>
> > >> This is the failing build:
> > >>
> > >>
> > >> http://jenkins.ovirt.org/job/vdsm_master_check-patch-el7-
> > x86_64/1054/console
> > >>
> > >> And this is probably the reason - using a ram disk:
> > >>
> > >> 12:24:53 Building remotely on ovirt-srv08.phx.ovirt.org (phx physical
> > >> integ-tests ram_disk fc23) in workspace
> > >> /home/jenkins/workspace/vdsm_master_check-patch-el7-x86_64
> > >>
> > >> We cannot run the storage tests using a ramdisk. We are creating
> > >> (tiny) volumes and storage domains and doing copies, this code cannot
> > >> work with ramdisk.
> > >
> > > Will it work on zram?
> > > What if we configure ram based iSCSI targets?
> >
> > I don't know, but it is easy to test - it this works the tests will work:
> >
> > dd if=/dev/zero of=file bs=512 count=1 oflag=direct
> > _______________________________________________
> > Infra mailing list
> > Infra@ovirt.org
> > http://lists.ovirt.org/mailman/listinfo/infra
> >
> >
> >
>
>
> --
> Eyal Edri
> Associate Manager
> RHV DevOps
> EMEA ENG Virtualization R&D
> Red Hat Israel
>
> phone: +972-9-7692018
> irc: eedri (on #tlv #rhev-dev #rhev-integ)