Hi Michael,
As described above, I create a ovs-based cluster, and added a Host, and created a VM successfully.
ovs-vsctl show
931582d5-9318-48c6-a1d6-8ec486582eb8
Bridge vdsmbr_vfMUcNKp
Port vdsmbr_vfMUcNKp
Interface vdsmbr_vfMUcNKp
type: internal
Port ovirtmgmt
Interface ovirtmgmt
type: internal
Port "p3p1"
Interface "p3p1"
ovs_version: "2.5.0"
At the same time ‘brctl show’ can still get ovirtmgmt information. And then, the network can not work from vdsm using the Ip binding to p3p1 or ovirtmgmt; I enable one of the other two NICs and the network is still not work for new enabled NIC.
I have to reboot the vdsm. After reboot, the vdsm was not abled controlled by ovirt engine anymore.
Here is some information: (The bridge name in virsh and ovs are not the same, why? Is this cause the error?)
Ifconfig
ovirtmgmt: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.0.117 netmask 255.255.255.0 broadcast 0.0.0.0
inet6 fe80::f8e5:c3ff:fe74:5c59 prefixlen 64 scopeid 0x20<link>
ether fa:e5:c3:74:5c:59 txqueuelen 0 (Ethernet)
RX packets 8389 bytes 1528498 (1.4 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 22 bytes 3740 (3.6 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
ovs-vsctl show
931582d5-9318-48c6-a1d6-8ec486582eb8
Bridge vdsmbr_vfMUcNKp
Port vdsmbr_vfMUcNKp
Interface vdsmbr_vfMUcNKp
type: internal
Port ovirtmgmt
Interface ovirtmgmt
type: internal
Port "p3p1"
Interface "p3p1"
ovs_version: "2.5.0"
vi /etc/libvirt/qemu/networks/vdsm-ovirtmgmt.xml
<network>
<name>vdsm-ovirtmgmt</name>
<uuid>09e92e82-2510-450e-bff7-72252e37b1b8</uuid>
<forward mode='bridge'/>
<bridge name='ovirtmgmt'/>
</network>
I can’t find anything about VM because ‘virsh list --all’ show nothing.
[root@server117 vdsm]# service vdsmd status -l
Redirecting to /bin/systemctl status -l vdsmd.service
â— vdsmd.service - Virtual Desktop Server Manager
Loaded: loaded (/usr/lib/systemd/system/vdsmd.service; enabled; vendor preset: enabled)
Active: inactive (dead)
Aug 02 04:37:50 server117 systemd[1]: Dependency failed for Virtual Desktop Server Manager.
Aug 02 04:37:50 server117 systemd[1]: Job vdsmd.service/start failed with result 'dependency'.
[root@server117 vdsm]# service vdsmd start
Redirecting to /bin/systemctl start vdsmd.service
A dependency job for vdsmd.service failed. See 'journalctl -xe' for details.
[root@server117 vdsm]# service vdsmd status -l
Redirecting to /bin/systemctl status -l vdsmd.service
â— vdsmd.service - Virtual Desktop Server Manager
Loaded: loaded (/usr/lib/systemd/system/vdsmd.service; enabled; vendor preset: enabled)
Active: inactive (dead)
Aug 02 04:37:50 server117 systemd[1]: Dependency failed for Virtual Desktop Server Manager.
Aug 02 04:37:50 server117 systemd[1]: Job vdsmd.service/start failed with result 'dependency'.
Aug 02 05:28:58 server117 systemd[1]: Dependency failed for Virtual Desktop Server Manager.
Aug 02 05:28:58 server117 systemd[1]: Job vdsmd.service/start failed with result 'dependency'.
I think I already got mad now. ^_^
Hope get help from you as soon as possible.
Thank you
Mark
发件人: Michael Burman [mailto:mburman@redhat.com]
发送时间: 2016年8月2日 16:01
收件人: Meni Yakove
抄送: lifuqiong; Dan Kenigsberg; Petr Horacek; users
主题: Re: [ovirt-users] [ovirt-devel] How to add ovs-based VM in version 4.0.2? Thank you
Hi ,
Did you synced network/s after you moved the host to the ovs type cluster?
It seems like you didn't..)
Go to 'Hosts' main tab' and choose the host, go to 'Network Interfaces' sub tab and press the 'Sync All Networks' , now the networks should be synced to host as ovs switch type.
Run the vm and check the xml.
It should look something like this:
<source bridge='vdsmbr_nRL3asDq'/>
<virtualport type='openvswitch'>thanks
On Tue, Aug 2, 2016 at 9:37 AM, Meni Yakove <myakove@redhat.com> wrote:
On Tue, Aug 2, 2016 at 7:12 AM, lifuqiong <lifuqiong@cncloudsec.com> wrote:
I create a cluster which already enabled ovs network as you mentioned , but when I create vm in this cluster, I can only using ovirtmgmt/ovirtmgmt vNIC profile, which is still a Linux bridge.
I found no way to add a OVS vNIC profile, I have to chose ovirtmgmt/ovirtmgmt vNIC to setup a VM. After VM is started, the vm is still using Linux bridge to communicate with outside, not the ovs.
Need I to create a ovs bridge or vport and bind it to physical NIC in vdsm manually?
Hope your reply as soon as possible.
Thank you
Mark
发件人: users-bounces@ovirt.org [mailto:users-bounces@ovirt.org] 代表 Meni Yakove
发送时间: 2016年8月1日 16:42
收件人: Dan Kenigsberg
主题: Re: [ovirt-users] [ovirt-devel] How to add ovs-based VM in version 4.0.2? Thank you
On Mon, Aug 1, 2016 at 11:07 AM, Dan Kenigsberg <danken@redhat.com> wrote:
On Mon, Aug 01, 2016 at 02:02:52PM +0800, lifuqiong wrote:
> Hi, I upgrade my ovirt to version 4.0.2.2, how to using ovs in this version?
> Is there any instruction? Thank you
Please note and note well: OVS is not production-grade yet. It is only a
preliminary tech preview, under active development.
However, we'd be very happy to get your help in testing it (and possibly
fixing it, too).
When defining a new cluster, you should see a check box, letting you
select OVS for that cluster.
To be precise, this is not a check box. In the Edit Cluster dialog, look at the "switch
type" option, and change "LEGACY" to "OVS".
After being checked, each VM network that
is defined in your cluster would be implemented with OVS instead of
Linux bridge.
As aluded before, there are plenty of known definciencies (e.g., no
persistence of ip config on VM network, no live migration, not all bond
modes, etc etc). But do not hesitate to raise other issues with the
devel mailing list.
Happy testing!
Dan.
_______________________________________________
Devel mailing list
Devel@ovirt.org
http://lists.ovirt.org/mailman/listinfo/devel
--Michael Burman
RedHat Israel, RHEV-M QE Network Team
Mobile: 054-5355725
IRC: mburman