Hi Juan,
Thanks for your advice.

I suppose following link will be relevant f= =3D or me to install oVirt on Fedora 17

Get oVirt
Install oVirt Engin= =3D e 3.1 from the stable Fedora 17 x86_64 packages:
http://www.ovirt.org/ge= =3D t-ovirt/

Hoping that it is up-to-date.

I'm also intereste= =3D d learning to install oVirt from source.

I have 4 hard drives= =3D here, old hd each with 180G capacity, installed on 2 PCs respectively read= =3D y for testing oVirt. Their bootings are controlled by BIOS, all with = =3D Fedora 17, 64bit, freshly installed. One PC is running 4-core AMD CPU= =3D with 8G RAM installed and another PC is running dualcore AMD CPU with 4G R= =3D AM installed.

I have been following below documnents to install = =3D oVirt;
oVirt 3.1, Glusterized (on Fedora 17)
http://blog.jebpages.com/archives/tag/ovirt/

Up and Running = =3D with oVirt, 3.1 Edition
http://blog.jebpages.com/archives/up-and-running= =3D -with-ovirt-3-1-edition/

Building oVirt engine
http://wiki.ovirt.= =3D org/wiki/Building_Ovirt_Engine

all not successful.

I'll s= =3D tart again following:-

Building Engine Draft
http://wiki.ovirt.or= =3D g/wiki/Building_Engine_Draft

B.R.
Stephen L

= =3D

From: Juan Hernandez <jhernand(a)redhat.com&g= t;=3D
To: Stephen Liu <satimis(a)yahoo.com>
Cc= : Itamar Heim <iheim(a)redhat.com>; "users(a)ovirt.org" <us= ers@=3D ovirt.org>
Sent:= S=3D aturday, November 10, 2012 1:49 AM
Subject: Re: [Users] Problem on running chkconfig
= =3D

On 11/09/2012 09:14 AM, Stephen Liu wrote:
> Hi,
> <= =3D br>> Whether I should follow;
>
> Building oVirt engine
= =3D > http://wiki.= ovirt.=3D org/w/index.php?title=3D3DBuilding_oVirt_engine&diff=3D3D5237&oldid= =3D3D5=3D 236
>
> Is it the latest version of the manual? Than= =3D ks
>
> B.R.
> Stephen L

Stephen, if you are insta= =3D lling the RPMs in Fedora 17 then all you need
to do is configure your ma= =3D chine to use the oVirt repository and then
install the engine, it will automatically= =3D install for you the required
JBoss AS version:

yum localinstall = =3D http://ovirt.org/releases/ovirt-release-fedora.noarch.rpm<=3D br>
yum install ovirt-engine-3.1.0

Once the packages are installe= =3D d then you can just use the engine-setup
tool, which is very easy to use= =3D :

engine-setup

That will automatically start for you the oVir= =3D t engine service. If for
whatever the reason you need to start/stop/rest= =3D art it you should use the
systemctl tool like this:

systemctl sta= =3D rt ovirt-engine.service
systemctl stop ovirt-engine.service
systemctl= =3D restart ovirt-engine.service

The wiki page that you mention is inte= =3D nded for users/developers that
want to install from source. Is that you = =3D case? If the answer is yes then
I would suggest to take a look at this alternative:

http://wiki.ovirt.org/wiki/Building_Engine_= Dr=3D aft

Is mostly the same content, but a bit more updated. I sugges= =3D ted in to
replace the old one with this one, but didn't get much feedbac= =3D k. If you
have any additional issue please let us know.

> = =3D ; -----------------------------------------------------------------= =3D -------
> *From:* Itamar Heim <iheim(a)redhat.com= >=3D
> *To:* Stephen Liu <satimis(a)yahoo.com>=
&g=3D t; *Cc:* "users(a)ovirt.org" <users(a)ovirt.org>; Juan = Antoni=3D o Hernandez
> Fernandez <jhernand(a)redhat.c= om&g=3D t;
> *Sent:* Friday, November 9, 2012 2:17 PM
>&n= =3D bsp; *Subject:* Re: [Users] Problem on running chkconfig
> > On 11/09/2012 05:48 AM, Stephen Liu wrote:
>&nbs= =3D p; > Hi all,
> >
> &g= =3D t; OS - Fedora 17 64bit
> > Instruction:
>&nbs= =3D p; > http://wiki.ovirt.org/wiki/Building_Ovi= rt=3D _Engine#Prerequisites
> >
> = =3D > Problem encountered as follows;
> > $ sudo ln -= =3D s /usr/share/jboss-as-7.1.1.Final /usr/share/jboss-as
> = =3D > $ su - -c 'chmod -R 777 /usr/share/jboss-as'
> =3D20 > lrwxrwxrwx. 1 root root 31 Nov 9 10:21 jboss-as ->
>&n= =3D bsp; > /usr/share/jboss-as-7.1.1.Final
> >= =3D ;
> > $ chkconfig jboss-as on
> = =3D > error reading information on service jboss-as: No such file or
>= =3D directory
> >
> &= =3D gt; $ sudo chkconfig jboss-as on
> > error reading i= =3D nformation on service jboss-as: No such file or
> direc= =3D tory
> > same problem.
> >> > Please advise how to solve the problem? TIA<= =3D br>>
> iirc, we changed process to use ovirt-engine= =3D service by now.
> probably need to update the wiki for= =3D this.
> juan?
>
>

--
Dire= =3D cci=3DC3=3DB3n Comercial: C/Jose Bardasano Baos, 9, Edif. Gorbea 3, planta
3=3DC2=3DBAD, 28016 Madrid, Spain
Inscrita en el Reg. Mercant= il d=3D e Madrid =3DE2=3D80=3D93 C.I.F. B82657941 - Red Hat S.L.

=