I found the solution ,promiscuous mode was rejecting the packets this was causing the issue ,enabled and now able to ping without any issues.

Thanks for the support !

On Fri, Apr 22, 2016 at 8:39 AM, Budur Nagaraju <nbudoor@gmail.com> wrote:

HI

Any updates issue is blocking ?

Thanks,

Nagaraju

On Thu, Apr 21, 2016 at 7:20 PM, Budur Nagaraju <nbudoor@gmail.com> wrote:

Below are the  details, unable to ping the gateway from the ovirt engine ,able to ping the ovirt engine from host as both are there in the same network.


[root@oe ~]# ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
    link/ether 00:16:3e:33:38:e5 brd ff:ff:ff:ff:ff:ff
    inet 10.206.66.9/23 brd 10.206.67.255 scope global eth0
    inet6 fe80::216:3eff:fe33:38e5/64 scope link
       valid_lft forever preferred_lft forever
[root@oe ~]#
[root@oe ~]#
[root@oe ~]#
[root@oe ~]# ip route
10.206.66.0/23 dev eth0  proto kernel  scope link  src 10.206.66.9
169.254.0.0/16 dev eth0  scope link  metric 1002
default via 10.206.67.254 dev eth0
[root@oe ~]#
[root@oe ~]#
[root@oe ~]#
[root@oe ~]# brctl show
bridge name     bridge id               STP enabled     interfaces
[root@oe ~]#

On Thu, Apr 21, 2016 at 4:51 PM, Yedidyah Bar David <didi@redhat.com> wrote:

On Thu, Apr 21, 2016 at 1:39 PM, Budur Nagaraju <nbudoor@gmail.com> wrote:
> HI
>
> Installed hosted engine and  after configuring  IP to ovirt engine unable to
> ping the gateway and found that there is no issue with the Network .

You mean that from inside the engine machine, you cannot ping the gateway?

Can you ping it from the host?

Please share output of these commands, from both the host and the engine vm:

ip addr
ip route
brctl show

Thanks,

>
> Is there any thing am missing  while installing Hosted engine ? below is
> output details,
>
>
> --== CONFIGURATION PREVIEW ==--
>
>           Engine FQDN                        : oe.bnglab.psecure.net
>           Bridge name                        : ovirtmgmt
>           SSH daemon port                    : 22
>           Gateway address                    : 10.206.67.254
>           Host name for web application      : hosted_engine_1
>           Host ID                            : 1
>           Image alias                        : hosted_engine
>           Image size GB                      : 25
>           Storage connection                 : 10.204.207.152:/home/heoe
>           Console type                       : vnc
>           Memory size MB                     : 4096
>           MAC address                        : 00:16:3e:2f:5c:40
>           Boot type                          : cdrom
>           Number of CPUs                     : 2
>           ISO image (for cdrom boot)         :
> /ovirt/CentOS-6.7-x86_64-minimal.iso
>           CPU Type                           : model_SandyBridge
>
>           Please confirm installation settings (Yes, No)[Yes]: yes
> [ INFO  ] Stage: Transaction setup
> [ INFO  ] Stage: Misc configuration
> [ INFO  ] Stage: Package installation
> [ INFO  ] Stage: Misc configuration
> [ INFO  ] Configuring libvirt
> [ INFO  ] Configuring VDSM
> [ INFO  ] Starting vdsmd
> [ INFO  ] Waiting for VDSM hardware info
> [ INFO  ] Waiting for VDSM hardware info
> [ INFO  ] Creating Storage Domain
> [ INFO  ] Creating Storage Pool
> [ INFO  ] Connecting Storage Pool
> [ INFO  ] Verifying sanlock lockspace initialization
> [ INFO  ] Creating VM Image
> [ INFO  ] Disconnecting Storage Pool
> [ INFO  ] Start monitoring domain
> [ INFO  ] Configuring VM
> [ INFO  ] Updating hosted-engine configuration
> [ INFO  ] Stage: Transaction commit
> [ INFO  ] Stage: Closing up
>           The following network ports should be opened:
>               tcp:5900
>               tcp:5901
>               udp:5900
>               udp:5901
>           An example of the required configuration for iptables can be found
> at:
>               /etc/ovirt-hosted-engine/iptables.example
>           In order to configure firewalld, copy the files from
>           /etc/ovirt-hosted-engine/firewalld to /etc/firewalld/services
>           and execute the following commands:
>               firewall-cmd -service hosted-console
> [ INFO  ] Creating VM
>           You can now connect to the VM with the following command:
>                 /usr/bin/remote-viewer vnc://localhost:5900
>           Use temporary password "2049ZfXr" to connect to vnc console.
>           Please note that in order to use remote-viewer you need to be able
> to run graphical applications.
>           This means that if you are using ssh you have to supply the -Y
> flag (enables trusted X11 forwarding).
>           Otherwise you can run the command from a terminal in your
> preferred desktop environment.
>           If you cannot run graphical applications you can connect to the
> graphic console from another host or connect to the console using the
> following command:
>           virsh -c qemu+tls://Test/system console HostedEngine
>           If you need to reboot the VM you will need to start it manually
> using the command:
>           hosted-engine --vm-start
>           You can then set a temporary password using the command:
>           hosted-engine --add-console-password
>           The VM has been started.  Install the OS and shut down or reboot
> it.  To continue please make a selection:
>
>           (1) Continue setup - VM installation is complete
>           (2) Reboot the VM and restart installation
>           (3) Abort setup
>           (4) Destroy VM and abort setup
>

> _______________________________________________
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>



--
Didi