I'm going through the log (which is quite big) and I've found out this part which is like 2 seconds after the vmcreate part. Have a look maybe this is what you're looking for. It contains the ERROR and Traceback in it. 


http://ur1.ca/gakhc


On Tue, Dec 31, 2013 at 4:36 PM, Gadi Ickowicz <gickowic@redhat.com> wrote:
It would be helpful to get a bit more information from the logs - after the vmCreate there are several other things that occur before the vm process is actually launched (prepareImage and following that the actual vm's should be visible in the log). Try to search for an error in the vdsm log, and if you cannot find one attach logs containing the vmCreate and the other operations I mentioned.

Errors in the vdsm log are usually logged in lines containing ERROR, but sometimes if the error comes from libvirt it may not contain the uppercase ERROR and be logged as libvirtError or something similar.

you should also have the qemu log for the vm you are trying to run. usually under /var/log/libvirt/qemu/<name_of_the_vm>.log - maybe that will give more information regarding the failure

Gadi Ickowicz

----- Original Message -----
From: "Joop" <jvdwege@xs4all.nl>
To: "Nauman Abbas" <nauman.abbas@seecs.edu.pk>
Cc: "users@ovirt.org" <Users@ovirt.org>
Sent: Tuesday, December 31, 2013 12:51:10 PM
Subject: Re: [Users] VM not starting up

Nauman Abbas <nauman.abbas@seecs.edu.pk> wrote:


I've attached the portions with vmcreate. I found 5 instances of pairs of call vmcreate and return vmcreate. I've separated them with lines. See if that helps.


On Tue, Dec 31, 2013 at 2:58 PM, Gadi Ickowicz < gickowic@redhat.com > wrote:


Hi,

Maybe you can send just the relevant part of the vdsm logs that contain the attempt to launch the vm itself - it should start with vmCreate. Try to find "::call vmCreate with (..." and either find the matching "return vmCreate with"
or an maybe there is an ERROR or Traceback in the vdsm log following the vmCreate call.

Gadi Ickowicz

----- Original Message -----
From: "Nauman Abbas" < nauman.abbas@seecs.edu.pk >
To: "Meital Bourvine" < mbourvin@redhat.com >
Cc: " users@ovirt.org " < Users@ovirt.org >
Sent: Tuesday, December 31, 2013 11:47:12 AM
Subject: Re: [Users] VM not starting up

Vdsm is running fine. Also checked the clocks. You were right, the Engine clock was 5 hours ahead of Node clock. I've corrected that but still the same issue.


On Tue, Dec 31, 2013 at 12:44 PM, Meital Bourvine < mbourvin@redhat.com > wrote:



Are you sure that vdsm is running?

The error happened at 2013-12-31 11:32:56,999 (engine.log)
but the last line in vdsm.log is from 2013-12-31 07:20:50,807

Also make sure that your clocked are synced.






From: "Nauman Abbas" < nauman.abbas@seecs.edu.pk >
To: "Meital Bourvine" < mbourvin@redhat.com >
Cc: " users@ovirt.org " < Users@ovirt.org >
Sent: Tuesday, December 31, 2013 9:39:09 AM

Subject: Re: [Users] VM not starting up

Sending files one by one. Vdsm.log


On Tue, Dec 31, 2013 at 11:48 AM, Meital Bourvine < mbourvin@redhat.com > wrote:



Engine log can be found on the engine (while vdsm.log is on the host).
The full path is - /var/log/ovirt-engine/engine.log

audit.log - /var/log/audit/audit.log

About the vdsm log - I don't see any error there, I think that you cut too much from it.




From: "Nauman Abbas" < nauman.abbas@seecs.edu.pk >
To: "Meital Bourvine" < mbourvin@redhat.com >
Cc: " users@ovirt.org " < Users@ovirt.org >
Sent: Tuesday, December 31, 2013 8:42:43 AM
Subject: Re: [Users] VM not starting up


Hello Meital

SELinux is off. The cluster doesn't work if SELinux is on, my hosts and storage is showing up as okay but VM is not starting up.

I've managed to get vdsm.log but cannot find engine.log and audit.log. Sorry for being a noob, if you can tell me the path to these files I'll send them right away.


On Tue, Dec 31, 2013 at 11:17 AM, Meital Bourvine < mbourvin@redhat.com > wrote:



Hi Nauman,

Maybe it's a selinux issue?
Please try running `setenforce 0` before starting the vm.

Also please attach engine.log, vdsm.log, and audit.log




From: "Nauman Abbas" < nauman.abbas@seecs.edu.pk >
To: " users@ovirt.org " < Users@ovirt.org >
Sent: Tuesday, December 31, 2013 7:13:01 AM
Subject: [Users] VM not starting up


Hello all,

First of all thank you for your help, I've finally managed to get my Cluster configured properly but now that I create VMs I'm facing another problem. Whenever I start my VM I get this error.

" VM TestVm is down. Exit message: Child quit during startup handshake: Input/output error."

I've googled around but haven't found any satisfactory solution. If anyone can help out it would be great.

Regards

Nauman Abbas
Assistant System Administrator (LMS),
Room No. A-207, SEECS,
National University of Sciences & Technology,
+ 92 321 5359946

_______________________________________________
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users




--

Nauman Abbas
Assistant System Administrator (LMS),
Room No. A-207, SEECS,
National University of Sciences & Technology,
+ 92 321 5359946




--

Nauman Abbas
Assistant System Administrator (LMS),
Room No. A-207, SEECS,
National University of Sciences & Technology,
+ 92 321 5359946




--

Nauman Abbas
Assistant System Administrator (LMS),
Room No. A-207, SEECS,
National University of Sciences & Technology,
+ 92 321 5359946

_______________________________________________
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users



--

Nauman Abbas
Assistant System Administrator (LMS),
Room No. A-207, SEECS,
National University of Sciences & Technology,
+ 92 321 5359946

Paste your logs to fpaste.org or similar and put the url in the mail. Your snippets don‘t contain any errors that i can see.

--
Sent from my Android tablet with K-9 Mail. Please excuse my brevity.

_______________________________________________
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users



--

Nauman Abbas
Assistant System Administrator (LMS),
Room No. A-207, SEECS,
National University of Sciences & Technology,
+ 92 321 5359946