Alex,<div><br></div><div>   I run again, but error persist:</div><div><br></div><div><div>[root@firelap marcelo.barbosa]# engine-setup </div><div>Welcome to oVirt Engine setup utility</div><div>oVirt Engine uses httpd to proxy requests to the application server.</div>
<div>It looks like the httpd installed locally is being actively used.</div><div>The installer can override current configuration .</div><div>Alternatively you can use JBoss directly (on ports higher than 1024)</div><div>
Do you wish to override current httpd configuration and restart the service? [&#39;yes&#39;| &#39;no&#39;]  [yes] : yees</div><div>Error: response is not part of the following accepted answers: yes, no</div><div>oVirt Engine uses httpd to proxy requests to the application server.</div>
<div>It looks like the httpd installed locally is being actively used.</div><div>The installer can override current configuration .</div><div>Alternatively you can use JBoss directly (on ports higher than 1024)</div><div>
Do you wish to override current httpd configuration and restart the service? [&#39;yes&#39;| &#39;no&#39;]  [yes] : </div><div>HTTP Port  [80] :      </div><div>HTTPS Port  [443] : </div><div>Host fully qualified domain name. Note: this name should be fully resolvable  [firelap.local] : </div>
<div>firelap.local did not resolve into an IP address</div><div>User input failed validation, do you still wish to use it? (yes|no): yes</div><div>Enter a password for an internal oVirt Engine administrator user (admin@internal) :</div>
<div>Warning: Weak Password.</div><div>Confirm password :</div><div>Organization Name for the Certificate  [local] : </div><div>The engine can be configured to present the UI in three different application modes. virt [Manage virtualization only], gluster [Manage gluster storage only], and both [Manage virtualization as well as gluster storage] [&#39;virt&#39;| &#39;gluster&#39;| &#39;both&#39;]  [both] : </div>
<div>The default storage type you will be using  [&#39;NFS&#39;| &#39;FC&#39;| &#39;ISCSI&#39;| &#39;POSIXFS&#39;]  [NFS] : </div><div>Enter DB type for installation [&#39;remote&#39;| &#39;local&#39;]  [local] : </div><div>
Enter a password for a local oVirt Engine DB admin user (engine) :</div><div>Warning: Weak Password.</div><div>Confirm password :</div><div>Local ISO domain path  [/var/lib/exports/iso] : /firebackup/ovirt/iso</div><div>Firewall ports need to be opened.</div>
<div>The installer can configure firewall automatically overriding the current configuration. The old configuration will be backed up.</div><div>Alternately you can configure the firewall later using an example file. </div>
<div>Which firewall do you wish to configure? [&#39;None&#39;| &#39;Firewalld&#39;| &#39;IPTables&#39;]: IPTables</div><div>Configure VDSM on this host? [&#39;yes&#39;| &#39;no&#39;]  [yes] : </div><div>Local storage domain path  [/var/lib/images] : /firebackup/ovirt/vms</div>
<div>Confirm root password :</div><div><br></div><div>oVirt Engine will be installed using the following configuration:</div><div>=================================================================</div><div>override-httpd-config:         yes</div>
<div>http-port:                     80</div><div>https-port:                    443</div><div>host-fqdn:                     firelap.local</div><div>auth-pass:                     ********</div><div>org-name:                      local</div>
<div>application-mode:              both</div><div>default-dc-type:               NFS</div><div>db-remote-install:             local</div><div>db-local-pass:                 ********</div><div>nfs-mp:                        /firebackup/ovirt/iso</div>
<div>override-firewall:             IPTables</div><div>config-allinone:               yes</div><div>storage-path:                  /firebackup/ovirt/vms</div><div>superuser-pass:                ********</div><div>Proceed with the configuration listed above? (yes|no): yes</div>
<div><br></div><div>Installing:</div><div>AIO: Validating CPU Compatibility...                              [ DONE ]</div><div>AIO: Adding firewall rules...                                     [ DONE ]</div><div>Configuring oVirt Engine...                                       [ DONE ]</div>
<div>Configuring JVM...                                                [ DONE ]</div><div>Creating CA...                                                    [ DONE ]</div><div>Updating ovirt-engine service...                                  [ DONE ]</div>
<div>Setting Database Configuration...                                 [ DONE ]</div><div>Setting Database Security...                                      [ DONE ]</div><div>Creating Database...                                              [ DONE ]</div>
<div>Updating the Default Data Center Storage Type...                  [ DONE ]</div><div>Editing oVirt Engine Configuration...                             [ DONE ]</div><div>Editing Postgresql Configuration...                               [ DONE ]</div>
<div>Configuring the Default ISO Domain...                             [ DONE ]</div><div>Configuring Firewall...                                           [ DONE ]</div><div>Starting ovirt-engine Service...                                  [ DONE ]</div>
<div>Configuring HTTPD...                                              [ DONE ]</div><div>AIO: Creating storage directory...                                [ DONE ]</div><div>AIO: Adding Local Datacenter and cluster...                       [ DONE ]</div>
<div>AIO: Adding Local host (This may take several minutes)...      [ ERROR ]</div><div>Error: Host was found in a &#39;Failed&#39; state. Please check engine and bootstrap installation logs.</div><div>Please check log file /var/log/ovirt-engine/engine-setup_2013_03_19_11_45_12.log for more information</div>
<div><br></div><div>   Log in attached.</div><div><br></div><div>   View config modified:</div><div><br></div><div>[root@firelap marcelo.barbosa]# cat /etc/sysconfig/wdmd </div><div># WDMDOPTS -- set the command line options for the wdmd daemon</div>
<div># See wdmd man page for full list of command line options.</div><div>#</div><div># Include &quot;-G sanlock&quot; in the option string.</div><div>#</div><div># To enable use of test scripts</div><div>WDMDOPTS=&quot;-G sanlock -S 1&quot;</div>
<div>#</div><div># To select a specific watchdog device</div><div>WDMDOPTS=&quot;-G sanlock -w /dev/watchdog1&quot;</div><div><br></div><div><br><div><div>Marcelo Barbosa</div><div><i><font color="#660000"><a href="mailto:mr.marcelo.barbosa@gmail.com" target="_blank">mr.marcelo.barbosa@gmail.com</a></font></i></div>
</div></div>
<br><br><div class="gmail_quote">On Tue, Mar 19, 2013 at 11:39 AM, Alex Lourie <span dir="ltr">&lt;<a href="mailto:alourie@redhat.com" target="_blank">alourie@redhat.com</a>&gt;</span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
Hi Marcelo<br>
<br>
Let&#39;s try something else.<br>
<br>
Run<br>
<br>
sed -i &#39;s/\#WDMDOPTS/WDMDOPTS/g&#39; /etc/sysconfig/wdmd<br>
<br>
And try running the setup again.<div class="HOEnZb"><div class="h5"><br>
<br>
On Tue, Mar 19, 2013 at 4:26 PM, Marcelo Barbosa &lt;<a href="mailto:mr.marcelo.barbosa@gmail.com" target="_blank">mr.marcelo.barbosa@gmail.com</a>&gt; wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
Alex,<br>
<br>
   Follows the file:<br>
   <br>
[root@firelap marcelo.barbosa]# cat /etc/sysconfig/wdmd<br>
# WDMDOPTS -- set the command line options for the wdmd daemon<br>
# See wdmd man page for full list of command line options.<br>
#<br>
# Include &quot;-G sanlock&quot; in the option string.<br>
#<br>
# To enable use of test scripts<br>
#WDMDOPTS=&quot;-G sanlock -S 1&quot;<br>
#<br>
# To select a specific watchdog device<br>
#WDMDOPTS=&quot;-G sanlock -w /dev/watchdog1&quot;<br>
<br>
   I tried again, but error:<br>
<br>
2013-03-19 11:05:33::ERROR::engine-setup:<u></u>:2385::root:: Traceback (most recent call last):<br>
  File &quot;/bin/engine-setup&quot;, line 2379, in &lt;module&gt;<br>
    main(confFile)<br>
  File &quot;/bin/engine-setup&quot;, line 2162, in main<br>
    runSequences()<br>
  File &quot;/bin/engine-setup&quot;, line 2085, in runSequences<br>
    controller.runAllSequences()<br>
  File &quot;/usr/share/ovirt-engine/<u></u>scripts/setup_controller.py&quot;, line 54, in runAllSequences<br>
    sequence.run()<br>
  File &quot;/usr/share/ovirt-engine/<u></u>scripts/setup_sequences.py&quot;, line 154, in run<br>
    step.run()<br>
  File &quot;/usr/share/ovirt-engine/<u></u>scripts/setup_sequences.py&quot;, line 60, in run<br>
    function()<br>
  File &quot;/usr/share/ovirt-engine/<u></u>scripts/plugins/all_in_one_<u></u>100.py&quot;, line 300, in waitForHostUp<br>
    utils.retry(isHostUp, tries=120, timeout=600, sleep=5)<br>
  File &quot;/usr/share/ovirt-engine/<u></u>scripts/common_utils.py&quot;, line 1009, in retry<br>
    raise e<br>
RetryFailException: Error: Host was found in a &#39;Failed&#39; state. Please check engine and bootstrap installation logs.<br>
<br>
   Full ERROR/LOG in attached.<br>
<br>
   More informations about my enviroment:<br>
<br>
[root@firelap marcelo.barbosa]# rpm -qa | grep -i ovirt-engine<br>
ovirt-engine-setup-plugin-<u></u>allinone-3.2.1-1.fc18.noarch<br>
ovirt-engine-backend-3.2.1-1.<u></u>fc18.noarch<br>
ovirt-engine-restapi-3.2.1-1.<u></u>fc18.noarch<br>
ovirt-engine-genericapi-3.2.1-<u></u>1.fc18.noarch<br>
ovirt-engine-cli-3.2.0.11-1.<u></u>fc18.noarch<br>
ovirt-engine-3.2.1-1.fc18.<u></u>noarch<br>
ovirt-engine-setup-3.2.1-1.<u></u>fc18.noarch<br>
ovirt-engine-dbscripts-3.2.1-<u></u>1.fc18.noarch<br>
ovirt-engine-sdk-3.2.0.10-1.<u></u>fc18.noarch<br>
ovirt-engine-userportal-3.2.1-<u></u>1.fc18.noarch<br>
ovirt-engine-webadmin-portal-<u></u>3.2.1-1.fc18.noarch<br>
ovirt-engine-tools-3.2.1-1.<u></u>fc18.noarch<br>
<br>
[root@firelap marcelo.barbosa]# cat /etc/hosts<br>
127.0.0.1   localhost localhost.localdomain localhost4 localhost4.localdomain4<br>
::1         localhost localhost.localdomain localhost6 localhost6.localdomain6<br>
<a href="tel:172.16.255.54" value="+551721625554" target="_blank">172.16.255.54</a>        firelap firelap.local<br>
<br>
[root@firelap marcelo.barbosa]# ifconfig <br>
bond0: flags=5123&lt;UP,BROADCAST,<u></u>MASTER,MULTICAST&gt;  mtu 1500<br>
        ether 00:00:00:00:00:00  txqueuelen 0  (Ethernet)<br>
        RX packets 0  bytes 0 (0.0 B)<br>
        RX errors 0  dropped 0  overruns 0  frame 0<br>
        TX packets 0  bytes 0 (0.0 B)<br>
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0<br>
<br>
bond1: flags=5123&lt;UP,BROADCAST,<u></u>MASTER,MULTICAST&gt;  mtu 1500<br>
        ether 00:00:00:00:00:00  txqueuelen 0  (Ethernet)<br>
        RX packets 0  bytes 0 (0.0 B)<br>
        RX errors 0  dropped 0  overruns 0  frame 0<br>
        TX packets 0  bytes 0 (0.0 B)<br>
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0<br>
<br>
bond2: flags=5123&lt;UP,BROADCAST,<u></u>MASTER,MULTICAST&gt;  mtu 1500<br>
        ether 00:00:00:00:00:00  txqueuelen 0  (Ethernet)<br>
        RX packets 0  bytes 0 (0.0 B)<br>
        RX errors 0  dropped 0  overruns 0  frame 0<br>
        TX packets 0  bytes 0 (0.0 B)<br>
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0<br>
<br>
bond3: flags=5123&lt;UP,BROADCAST,<u></u>MASTER,MULTICAST&gt;  mtu 1500<br>
        ether 00:00:00:00:00:00  txqueuelen 0  (Ethernet)<br>
        RX packets 0  bytes 0 (0.0 B)<br>
        RX errors 0  dropped 0  overruns 0  frame 0<br>
        TX packets 0  bytes 0 (0.0 B)<br>
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0<br>
<br>
bond4: flags=5123&lt;UP,BROADCAST,<u></u>MASTER,MULTICAST&gt;  mtu 1500<br>
        ether 00:00:00:00:00:00  txqueuelen 0  (Ethernet)<br>
        RX packets 0  bytes 0 (0.0 B)<br>
        RX errors 0  dropped 0  overruns 0  frame 0<br>
        TX packets 0  bytes 0 (0.0 B)<br>
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0<br>
<br>
lo: flags=73&lt;UP,LOOPBACK,RUNNING&gt;  mtu 65536<br>
        inet 127.0.0.1  netmask 255.0.0.0<br>
        inet6 ::1  prefixlen 128  scopeid 0x10&lt;host&gt;<br>
        loop  txqueuelen 0  (Local Loopback)<br>
        RX packets 115968  bytes 34730071 (33.1 MiB)<br>
        RX errors 0  dropped 0  overruns 0  frame 0<br>
        TX packets 115968  bytes 34730071 (33.1 MiB)<br>
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0<br>
<br>
p5p1: flags=4163&lt;UP,BROADCAST,<u></u>RUNNING,MULTICAST&gt;  mtu 1500<br>
        inet <a href="tel:172.16.255.54" value="+551721625554" target="_blank">172.16.255.54</a>  netmask 255.255.255.192  broadcast <a href="tel:172.16.255.63" value="+551721625563" target="_blank">172.16.255.63</a><br>

        inet6 fe80::7a45:c4ff:feb0:8995  prefixlen 64  scopeid 0x20&lt;link&gt;<br>
        ether 78:45:c4:b0:89:95  txqueuelen 1000  (Ethernet)<br>
        RX packets 1785531  bytes 2623497125 (2.4 GiB)<br>
        RX errors 0  dropped 0  overruns 0  frame 0<br>
        TX packets 975613  bytes 76733377 (73.1 MiB)<br>
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0<br>
        device interrupt 17  <br>
<br>
   Forever run engine-cleanup before engine-setup<br>
<br>
[root@localhost ~]# engine-setup <br>
Welcome to oVirt Engine setup utility<br>
oVirt Engine uses httpd to proxy requests to the application server.<br>
It looks like the httpd installed locally is being actively used.<br>
The installer can override current configuration .<br>
Alternatively you can use JBoss directly (on ports higher than 1024)<br>
Do you wish to override current httpd configuration and restart the service? [&#39;yes&#39;| &#39;no&#39;]  [yes] : <br>
HTTP Port  [80] : <br>
HTTPS Port  [443] : <br>
Host fully qualified domain name. Note: this name should be fully resolvable  [firelap.local] : <br>
firelap.local did not resolve into an IP address<br>
User input failed validation, do you still wish to use it? (yes|no): yes<br>
Enter a password for an internal oVirt Engine administrator user (admin@internal) :<br>
Warning: Weak Password.<br>
Confirm password :<br>
Organization Name for the Certificate  [local] : <br>
The engine can be configured to present the UI in three different application modes. virt [Manage virtualization only], gluster [Manage gluster storage only], and both [Manage virtualization as well as gluster storage] [&#39;virt&#39;| &#39;gluster&#39;| &#39;both&#39;]  [both] : <br>

The default storage type you will be using  [&#39;NFS&#39;| &#39;FC&#39;| &#39;ISCSI&#39;| &#39;POSIXFS&#39;]  [NFS] : <br>
Enter DB type for installation [&#39;remote&#39;| &#39;local&#39;]  [local] : <br>
Enter a password for a local oVirt Engine DB admin user (engine) :<br>
Warning: Weak Password.<br>
Confirm password :<br>
Error: passwords don&#39;t match<br>
Enter a password for a local oVirt Engine DB admin user (engine) :<br>
Warning: Weak Password.<br>
Confirm password :<br>
Local ISO domain path  [/var/lib/exports/iso] : /firebackup/ovirt/iso<br>
Error: mount point already exists in /etc/exports<br>
Local ISO domain path  [/var/lib/exports/iso] : /firebackup/ovirt/iso<br>
Firewall ports need to be opened.<br>
The installer can configure firewall automatically overriding the current configuration. The old configuration will be backed up.<br>
Alternately you can configure the firewall later using an example file. <br>
Which firewall do you wish to configure? [&#39;None&#39;| &#39;Firewalld&#39;| &#39;IPTables&#39;]: IPTables<br>
Configure VDSM on this host? [&#39;yes&#39;| &#39;no&#39;]  [yes] : <br>
Local storage domain path  [/var/lib/images] : /firebackup/ovirt/vms<br>
Confirm root password :<br>
<br>
oVirt Engine will be installed using the following configuration:<br>
==============================<u></u>==============================<u></u>=====<br>
override-httpd-config:         yes<br>
http-port:                     80<br>
https-port:                    443<br>
host-fqdn:                     firelap.local<br>
auth-pass:                     ********<br>
org-name:                      local<br>
application-mode:              both<br>
default-dc-type:               NFS<br>
db-remote-install:             local<br>
db-local-pass:                 ********<br>
nfs-mp:                        /firebackup/ovirt/iso<br>
override-firewall:             IPTables<br>
config-allinone:               yes<br>
storage-path:                  /firebackup/ovirt/vms<br>
superuser-pass:                ********<br>
Proceed with the configuration listed above? (yes|no): yes<br>
<br>
Installing:<br>
AIO: Validating CPU Compatibility...                              [ DONE ]<br>
AIO: Adding firewall rules...                                     [ DONE ]<br>
Configuring oVirt Engine...                                       [ DONE ]<br>
Configuring JVM...                                                [ DONE ]<br>
Creating CA...                                                    [ DONE ]<br>
Updating ovirt-engine service...                                  [ DONE ]<br>
Setting Database Configuration...                                 [ DONE ]<br>
Setting Database Security...                                      [ DONE ]<br>
Creating Database...                                              [ DONE ]<br>
Updating the Default Data Center Storage Type...                  [ DONE ]<br>
Editing oVirt Engine Configuration...                             [ DONE ]<br>
Editing Postgresql Configuration...                               [ DONE ]<br>
Configuring the Default ISO Domain...                             [ DONE ]<br>
Configuring Firewall...                                           [ DONE ]<br>
Starting ovirt-engine Service...                                  [ DONE ]<br>
Configuring HTTPD...                                              [ DONE ]<br>
AIO: Creating storage directory...                                [ DONE ]<br>
AIO: Adding Local Datacenter and cluster...                       [ DONE ]<br>
AIO: Adding Local host (This may take several minutes)...      [ ERROR ]<br>
Error: Host was found in a &#39;Failed&#39; state. Please check engine and bootstrap installation logs.<br>
Please check log file /var/log/ovirt-engine/engine-<u></u>setup_2013_03_19_11_00_51.log for more information<br>
<br>
   Let me know if you need any additional tests, thank you for attention. <br>
<br>
Marcelo Barbosa<br>
<a href="mailto:mr.marcelo.barbosa@gmail.com" target="_blank">mr.marcelo.barbosa@gmail.com</a><br>
<br>
<br>
On Tue, Mar 19, 2013 at 10:51 AM, Marcelo Barbosa &lt;<a href="mailto:mr.marcelo.barbosa@gmail.com" target="_blank">mr.marcelo.barbosa@gmail.com</a>&gt; wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
Alex,<br>
<br>
   i am check:<br>
<br>
# rpm -qa | grep sanlock<br>
sanlock-2.6-7.fc18.x86_64<br>
libvirt-lock-sanlock-0.10.2.3-<u></u>1.fc18.x86_64<br>
sanlock-lib-2.6-7.fc18.x86_64<br>
sanlock-python-2.6-7.fc18.x86_<u></u>64<br>
<br>
   you would like make reinstall ? I can try again...<br>
<br>
Marcelo Barbosa<br>
<a href="mailto:mr.marcelo.barbosa@gmail.com" target="_blank">mr.marcelo.barbosa@gmail.com</a><br>
<br>
<br>
On Tue, Mar 19, 2013 at 10:30 AM, Alex Lourie &lt;<a href="mailto:alourie@redhat.com" target="_blank">alourie@redhat.com</a>&gt; wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
Hi Marcelo<br>
<br>
Can you please check that you have sanlock-2.6-7 installed?<br>
<br>
Thanks.<br>
<br>
On Wed, Mar 6, 2013 at 10:51 PM, Marcelo Barbosa &lt;<a href="mailto:mr.marcelo.barbosa@gmail.com" target="_blank">mr.marcelo.barbosa@gmail.com</a>&gt; wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
Alex,<br>
<br>
   Thankyou for attention. This return should not happen, because I have my hostname registered and running on my DNS servers, but i&#39;m inserted in /etc/hosts my hostname and retry setup, but return new error:<br>
<br>
<br>
2013-03-06 17:35:14::DEBUG::all_in_one_<u></u>100::297::root:: Waiting for host to become operational<br>
2013-03-06 17:35:14::DEBUG::all_in_one_<u></u>100::300::root:: current host status is: up<br>
2013-03-06 17:35:14::DEBUG::all_in_one_<u></u>100::302::root:: The host is up.<br>
2013-03-06 17:35:14::DEBUG::setup_<u></u>sequences::59::root:: running addStorageDomain<br>
2013-03-06 17:35:14::DEBUG::all_in_one_<u></u>100::317::root:: Adding local storage domain<br>
2013-03-06 17:35:14::INFO::all_in_one_<u></u>100::322::root:: Creating local storage<br>
2013-03-06 17:35:14::INFO::all_in_one_<u></u>100::326::root:: Creating local storage domain<br>
2013-03-06 17:35:14::INFO::all_in_one_<u></u>100::334::root:: Adding local storage domain<br>
2013-03-06 17:35:15::ERROR::all_in_one_<u></u>100::337::root:: Traceback (most recent call last):<br>
  File &quot;/usr/share/ovirt-engine/<u></u>scripts/plugins/all_in_one_<u></u>100.py&quot;, line 335, in addStorageDomain<br>
    controller.CONF[&quot;API_OBJECT&quot;].<u></u>storagedomains.add(sdParams)<br>
  File &quot;/usr/lib/python2.7/site-<u></u>packages/ovirtsdk/<u></u>infrastructure/brokers.py&quot;, line 5151, in add<br>
    headers={&quot;Expect&quot;:expect, &quot;Correlation-Id&quot;:correlation_<u></u>id})<br>
  File &quot;/usr/lib/python2.7/site-<u></u>packages/ovirtsdk/<u></u>infrastructure/proxy.py&quot;, line 118, in add<br>
    return self.request(&#39;POST&#39;, url, body, headers)<br>
  File &quot;/usr/lib/python2.7/site-<u></u>packages/ovirtsdk/<u></u>infrastructure/proxy.py&quot;, line 129, in request<br>
    last=last)<br>
  File &quot;/usr/lib/python2.7/site-<u></u>packages/ovirtsdk/<u></u>infrastructure/proxy.py&quot;, line 159, in __doRequest<br>
    raise RequestError, response<br>
RequestError: <br>
status: 400<br>
reason: Bad Request<br>
detail: Cannot add Storage. Internal error, Storage Connection doesn&#39;t exist.<br>
<br>
2013-03-06 17:35:15::DEBUG::setup_<u></u>sequences::62::root:: Traceback (most recent call last):<br>
  File &quot;/usr/share/ovirt-engine/<u></u>scripts/setup_sequences.py&quot;, line 60, in run<br>
    function()<br>
  File &quot;/usr/share/ovirt-engine/<u></u>scripts/plugins/all_in_one_<u></u>100.py&quot;, line 338, in addStorageDomain<br>
    raise Exception(ERROR_ADD_LOCAL_<u></u>DOMAIN)<br>
Exception: Error: could not add local storage domain<br>
<br>
2013-03-06 17:35:15::DEBUG::engine-setup:<u></u>:1948::root:: *** The following params were used as user input:<br>
2013-03-06 17:35:15::DEBUG::engine-setup:<u></u>:1953::root:: override-httpd-config: yes<br>
2013-03-06 17:35:15::DEBUG::engine-setup:<u></u>:1953::root:: http-port: 80<br>
2013-03-06 17:35:15::DEBUG::engine-setup:<u></u>:1953::root:: https-port: 443<br>
2013-03-06 17:35:15::DEBUG::engine-setup:<u></u>:1953::root:: random-passwords: no<br>
2013-03-06 17:35:15::DEBUG::engine-setup:<u></u>:1953::root:: mac-range: 00:1A:4A:10:FF:00-00:1A:4A:10:<u></u>FF:FF<br>
2013-03-06 17:35:15::DEBUG::engine-setup:<u></u>:1953::root:: host-fqdn: <a href="http://firelap.usc.unirede.net" target="_blank">firelap.usc.unirede.net</a><br>
2013-03-06 17:35:15::DEBUG::engine-setup:<u></u>:1953::root:: auth-pass: ********<br>
2013-03-06 17:35:15::DEBUG::engine-setup:<u></u>:1953::root:: org-name: firelap<br>
2013-03-06 17:35:15::DEBUG::engine-setup:<u></u>:1953::root:: application-mode: both<br>
2013-03-06 17:35:15::DEBUG::engine-setup:<u></u>:1953::root:: default-dc-type: NFS<br>
2013-03-06 17:35:15::DEBUG::engine-setup:<u></u>:1953::root:: db-remote-install: local<br>
2013-03-06 17:35:15::DEBUG::engine-setup:<u></u>:1953::root:: db-host: localhost<br>
2013-03-06 17:35:15::DEBUG::engine-setup:<u></u>:1953::root:: db-local-pass: ********<br>
2013-03-06 17:35:15::DEBUG::engine-setup:<u></u>:1953::root:: nfs-mp: /firebackup/********/iso<br>
2013-03-06 17:35:15::DEBUG::engine-setup:<u></u>:1953::root:: iso-domain-name: ISO_DOMAIN<br>
2013-03-06 17:35:15::DEBUG::engine-setup:<u></u>:1953::root:: config-nfs: yes<br>
2013-03-06 17:35:15::DEBUG::engine-setup:<u></u>:1953::root:: override-firewall: IPTables<br>
2013-03-06 17:35:15::DEBUG::engine-setup:<u></u>:1953::root:: config-allinone: yes<br>
2013-03-06 17:35:15::DEBUG::engine-setup:<u></u>:1953::root:: storage-path: /firebackup/********/vms<br>
2013-03-06 17:35:15::DEBUG::engine-setup:<u></u>:1953::root:: superuser-pass: ********<br>
2013-03-06 17:35:15::ERROR::engine-setup:<u></u>:2369::root:: Traceback (most recent call last):<br>
  File &quot;/bin/engine-setup&quot;, line 2363, in &lt;module&gt;<br>
    main(confFile)<br>
  File &quot;/bin/engine-setup&quot;, line 2146, in main<br>
    runSequences()<br>
  File &quot;/bin/engine-setup&quot;, line 2068, in runSequences<br>
    controller.runAllSequences()<br>
  File &quot;/usr/share/ovirt-engine/<u></u>scripts/setup_controller.py&quot;, line 54, in runAllSequences<br>
    sequence.run()<br>
  File &quot;/usr/share/ovirt-engine/<u></u>scripts/setup_sequences.py&quot;, line 154, in run<br>
    step.run()<br>
  File &quot;/usr/share/ovirt-engine/<u></u>scripts/setup_sequences.py&quot;, line 60, in run<br>
    function()<br>
  File &quot;/usr/share/ovirt-engine/<u></u>scripts/plugins/all_in_one_<u></u>100.py&quot;, line 338, in addStorageDomain<br>
    raise Exception(ERROR_ADD_LOCAL_<u></u>DOMAIN)<br>
Exception: Error: could not add local storage domain<br>
<br>
   Any ideas to solve this problem?<br>
<br>
Marcelo Barbosa<br>
<a href="mailto:mr.marcelo.barbosa@gmail.com" target="_blank">mr.marcelo.barbosa@gmail.com</a><br>
<br>
<br>
On Wed, Mar 6, 2013 at 4:23 PM, Alexandre Santos &lt;<a href="mailto:santosam72@gmail.com" target="_blank">santosam72@gmail.com</a>&gt; wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
Hi. Have you tried solving the hostnames resolving issues that are described on your email? Add the hosts to /etc/hosts<br>
<br>
Alex<br>
<br>
No dia 06/03/2013 18:02, &quot;Marcelo Barbosa&quot; &lt;<a href="mailto:mr.marcelo.barbosa@gmail.com" target="_blank">mr.marcelo.barbosa@gmail.com</a>&gt; escreveu:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
Attached my log file. <br>
<br>
Marcelo Barbosa<br>
<a href="mailto:mr.marcelo.barbosa@gmail.com" target="_blank">mr.marcelo.barbosa@gmail.com</a><br>
<br>
<br>
On Wed, Mar 6, 2013 at 2:48 PM, Marcelo Barbosa &lt;<a href="mailto:mr.marcelo.barbosa@gmail.com" target="_blank">mr.marcelo.barbosa@gmail.com</a>&gt; wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
hi guys,<br>
<br>
   I&#39;am tryed install Ovirt 3.2 all-in-one in my Fedora 18, but this version not finish for sucessful install, information my enviroment:<br>
<br>
[root@firelap ovirt]# cat /etc/redhat-release <br>
Fedora release 18 (Spherical Cow)<br>
<br>
[root@firelap ovirt]# uname -a<br>
Linux firelap 3.7.9-205.fc18.x86_64 #1 SMP Sun Feb 24 20:10:02 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux<br>
<br>
[root@firelap ovirt]# ifconfig <br>
bond0: flags=5123&lt;UP,BROADCAST,<u></u>MASTER,MULTICAST&gt;  mtu 1500<br>
        ether 00:00:00:00:00:00  txqueuelen 0  (Ethernet)<br>
        RX packets 0  bytes 0 (0.0 B)<br>
        RX errors 0  dropped 0  overruns 0  frame 0<br>
        TX packets 0  bytes 0 (0.0 B)<br>
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0<br>
<br>
bond1: flags=5123&lt;UP,BROADCAST,<u></u>MASTER,MULTICAST&gt;  mtu 1500<br>
        ether 00:00:00:00:00:00  txqueuelen 0  (Ethernet)<br>
        RX packets 0  bytes 0 (0.0 B)<br>
        RX errors 0  dropped 0  overruns 0  frame 0<br>
        TX packets 0  bytes 0 (0.0 B)<br>
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0<br>
<br>
bond2: flags=5123&lt;UP,BROADCAST,<u></u>MASTER,MULTICAST&gt;  mtu 1500<br>
        ether 00:00:00:00:00:00  txqueuelen 0  (Ethernet)<br>
        RX packets 0  bytes 0 (0.0 B)<br>
        RX errors 0  dropped 0  overruns 0  frame 0<br>
        TX packets 0  bytes 0 (0.0 B)<br>
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0<br>
<br>
bond3: flags=5123&lt;UP,BROADCAST,<u></u>MASTER,MULTICAST&gt;  mtu 1500<br>
        ether 00:00:00:00:00:00  txqueuelen 0  (Ethernet)<br>
        RX packets 0  bytes 0 (0.0 B)<br>
        RX errors 0  dropped 0  overruns 0  frame 0<br>
        TX packets 0  bytes 0 (0.0 B)<br>
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0<br>
<br>
bond4: flags=5123&lt;UP,BROADCAST,<u></u>MASTER,MULTICAST&gt;  mtu 1500<br>
        ether 00:00:00:00:00:00  txqueuelen 0  (Ethernet)<br>
        RX packets 0  bytes 0 (0.0 B)<br>
        RX errors 0  dropped 0  overruns 0  frame 0<br>
        TX packets 0  bytes 0 (0.0 B)<br>
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0<br>
<br>
lo: flags=73&lt;UP,LOOPBACK,RUNNING&gt;  mtu 65536<br>
        inet 127.0.0.1  netmask 255.0.0.0<br>
        inet6 ::1  prefixlen 128  scopeid 0x10&lt;host&gt;<br>
        loop  txqueuelen 0  (Local Loopback)<br>
        RX packets 136972  bytes 54834621 (52.2 MiB)<br>
        RX errors 0  dropped 0  overruns 0  frame 0<br>
        TX packets 136972  bytes 54834621 (52.2 MiB)<br>
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0<br>
<br>
p5p1: flags=4163&lt;UP,BROADCAST,<u></u>RUNNING,MULTICAST&gt;  mtu 1500<br>
        inet <a href="tel:172.16.255.43" value="+551721625543" target="_blank">172.16.255.43</a>  netmask 255.255.255.192  broadcast <a href="tel:172.16.255.63" value="+551721625563" target="_blank">172.16.255.63</a><br>

        inet6 fe80::7a45:c4ff:feb0:8995  prefixlen 64  scopeid 0x20&lt;link&gt;<br>
        ether 78:45:c4:b0:89:95  txqueuelen 1000  (Ethernet)<br>
        RX packets 480681  bytes 614801393 (586.3 MiB)<br>
        RX errors 0  dropped 0  overruns 0  frame 0<br>
        TX packets 323373  bytes 35479386 (33.8 MiB)<br>
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0<br>
        device interrupt 17  <br>
<br>
[root@firelap ovirt]# rpm -qa | grep ovirt<br>
ovirt-engine-cli-3.2.0.10-1.<u></u>fc18.noarch<br>
ovirt-engine-backend-3.2.0-4.<u></u>fc18.noarch<br>
ovirt-engine-config-3.2.0-4.<u></u>fc18.noarch<br>
ovirt-host-deploy-1.0.0-1.<u></u>fc18.noarch<br>
ovirt-engine-setup-plugin-<u></u>allinone-3.2.0-4.fc18.noarch<br>
ovirt-engine-restapi-3.2.0-4.<u></u>fc18.noarch<br>
ovirt-engine-dbscripts-3.2.0-<u></u>4.fc18.noarch<br>
ovirt-image-uploader-3.2.0-1.<u></u>fc18.noarch<br>
ovirt-host-deploy-offline-1.0.<u></u>0-1.fc18.noarch<br>
ovirt-engine-setup-3.2.0-4.<u></u>fc18.noarch<br>
ovirt-release-fedora-5-3.<u></u>noarch<br>
ovirt-engine-tools-common-3.2.<u></u>0-4.fc18.noarch<br>
ovirt-engine-3.2.0-4.fc18.<u></u>noarch<br>
ovirt-log-collector-3.2.0-1.<u></u>fc18.noarch<br>
ovirt-host-deploy-java-1.0.0-<u></u>1.fc18.noarch<br>
ovirt-engine-userportal-3.2.0-<u></u>4.fc18.noarch<br>
ovirt-engine-notification-<u></u>service-3.2.0-4.fc18.noarch<br>
ovirt-iso-uploader-3.2.0-1.<u></u>fc18.noarch<br>
ovirt-engine-webadmin-portal-<u></u>3.2.0-4.fc18.noarch<br>
ovirt-engine-sdk-3.2.0.9-1.<u></u>fc18.noarch<br>
ovirt-engine-genericapi-3.2.0-<u></u>4.fc18.noarch<br>
<br>
[root@firelap ~]# host <a href="http://firelap.usc.unirede.net" target="_blank">firelap.usc.unirede.net</a><br>
<a href="http://firelap.usc.unirede.net" target="_blank">firelap.usc.unirede.net</a> has address <a href="tel:172.16.255.43" value="+551721625543" target="_blank">172.16.255.43</a><br>
<br>
[root@firelap ~]# ping <a href="http://firelap.usc.unirede.net" target="_blank">firelap.usc.unirede.net</a><br>
PING <a href="http://firelap.usc.unirede.net" target="_blank">firelap.usc.unirede.net</a> <a href="tel:%28172.16.255.43" value="+551721625543" target="_blank">(172.16.255.43</a>) 56(84) bytes of data.<br>
64 bytes from firelap <a href="tel:%28172.16.255.43" value="+551721625543" target="_blank">(172.16.255.43</a>): icmp_seq=1 ttl=64 time=0.055 ms<br>
<br>
[root@firelap ~]# engine-setup <br>
Welcome to oVirt Engine setup utility<br>
oVirt Engine uses httpd to proxy requests to the application server.<br>
It looks like the httpd installed locally is being actively used.<br>
The installer can override current configuration .<br>
Alternatively you can use JBoss directly (on ports higher than 1024)<br>
Do you wish to override current httpd configuration and restart the service? [&#39;yes&#39;| &#39;no&#39;]  [yes] : <br>
HTTP Port  [80] : <br>
HTTPS Port  [443] : <br>
Host fully qualified domain name. Note: this name should be fully resolvable  [<a href="http://firelap.no-ip.org" target="_blank">firelap.no-ip.org</a>] : localhost.localdomain<br>
The IP (127.0.0.1) which was resolved from the FQDN localhost.localdomain is not configured on any interface on this host<br>
User input failed validation, do you still wish to use it? (yes|no): no<br>
Host fully qualified domain name. Note: this name should be fully resolvable  [<a href="http://firelap.no-ip.org" target="_blank">firelap.no-ip.org</a>] : <br>
<a href="http://firelap.no-ip.org" target="_blank">firelap.no-ip.org</a> did not resolve into an IP address<br>
User input failed validation, do you still wish to use it? (yes|no): no<br>
Host fully qualified domain name. Note: this name should be fully resolvable  [<a href="http://firelap.no-ip.org" target="_blank">firelap.no-ip.org</a>] : <a href="http://firelap.usc.unirede.net" target="_blank">firelap.usc.unirede.net</a> <br>

Enter a password for an internal oVirt Engine administrator user (admin@internal) :<br>
Warning: Weak Password.<br>
Confirm password :<br>
Organization Name for the Certificate  [<a href="http://no-ip.org" target="_blank">no-ip.org</a>] : <a href="http://firelap.usc.unirede.net" target="_blank">firelap.usc.unirede.net</a> <br>
The engine can be configured to present the UI in three different application modes. virt [Manage virtualization only], gluster [Manage gluster storage only], and both [Manage virtualization as well as gluster storage] [&#39;virt&#39;| &#39;gluster&#39;| &#39;both&#39;]  [both] : <br>

The default storage type you will be using  [&#39;NFS&#39;| &#39;FC&#39;| &#39;ISCSI&#39;| &#39;POSIXFS&#39;]  [NFS] : <br>
Enter DB type for installation [&#39;remote&#39;| &#39;local&#39;]  [local] : <br>
Enter a password for a local oVirt Engine DB admin user (engine) :<br>
Warning: Weak Password.<br>
Confirm password :<br>
Local ISO domain path  [/var/lib/exports/iso] : /firebackup/ovirt/iso<br>
Error: directory /firebackup/ovirt/iso is not empty<br>
Local ISO domain path  [/var/lib/exports/iso] : /firebackup/ovirt/iso<br>
Firewall ports need to be opened.<br>
The installer can configure firewall automatically overriding the current configuration. The old configuration will be backed up.<br>
Alternately you can configure the firewall later using an example file. <br>
Which firewall do you wish to configure? [&#39;None&#39;| &#39;Firewalld&#39;| &#39;IPTables&#39;]: IPTables<br>
Configure VDSM on this host? [&#39;yes&#39;| &#39;no&#39;]  [yes] : <br>
Local storage domain path  [/var/lib/images] : /firebackup/ovirt/vms<br>
Confirm root password :<br>
<br>
oVirt Engine will be installed using the following configuration:<br>
==============================<u></u>==============================<u></u>=====<br>
override-httpd-config:         yes<br>
http-port:                     80<br>
https-port:                    443<br>
host-fqdn:                     <a href="http://firelap.usc.unirede.net" target="_blank">firelap.usc.unirede.net</a><br>
auth-pass:                     ********<br>
org-name:                      <a href="http://firelap.usc.unirede.net" target="_blank">firelap.usc.unirede.net</a><br>
application-mode:              both<br>
default-dc-type:               NFS<br>
db-remote-install:             local<br>
db-local-pass:                 ********<br>
nfs-mp:                        /firebackup/ovirt/iso<br>
override-firewall:             IPTables<br>
config-allinone:               yes<br>
storage-path:                  /firebackup/ovirt/vms<br>
superuser-pass:                ********<br>
Proceed with the configuration listed above? (yes|no): yes<br>
<br>
Installing:<br>
AIO: Validating CPU Compatibility...                              [ DONE ]<br>
AIO: Adding firewall rules...                                     [ DONE ]<br>
Configuring oVirt Engine...                                       [ DONE ]<br>
Configuring JVM...                                                [ DONE ]<br>
Creating CA...                                                    [ DONE ]<br>
Updating ovirt-engine service...                                  [ DONE ]<br>
Setting Database Configuration...                                 [ DONE ]<br>
Setting Database Security...                                      [ DONE ]<br>
Creating Database...                                              [ DONE ]<br>
Updating the Default Data Center Storage Type...                  [ DONE ]<br>
Editing oVirt Engine Configuration...                             [ DONE ]<br>
Editing Postgresql Configuration...                               [ DONE ]<br>
Configuring the Default ISO Domain...                             [ DONE ]<br>
Configuring Firewall...                                           [ DONE ]<br>
Starting ovirt-engine Service...                                  [ DONE ]<br>
Configuring HTTPD...                                              [ DONE ]<br>
AIO: Creating storage directory...                                [ DONE ]<br>
AIO: Adding Local Datacenter and cluster...                       [ DONE ]<br>
AIO: Adding Local host (This may take several minutes)...      [ ERROR ]<br>
Error: Host was found in a &#39;Failed&#39; state. Please check engine and bootstrap installation logs.<br>
Please check log file /var/log/ovirt-engine/engine-<u></u>setup_2013_03_06_14_30_51.log for more information<br>
<br>
2013-03-06 14:35:34::DEBUG::common_utils:<u></u>:474::root:: retcode = 0<br>
2013-03-06 14:35:34::DEBUG::common_utils:<u></u>:1238::root:: stopping httpd<br>
2013-03-06 14:35:34::DEBUG::common_utils:<u></u>:1275::root:: executing action httpd on service stop<br>
2013-03-06 14:35:34::DEBUG::common_utils:<u></u>:434::root:: Executing command --&gt; &#39;/sbin/service httpd stop&#39;<br>
2013-03-06 14:35:34::DEBUG::common_utils:<u></u>:472::root:: output = <br>
2013-03-06 14:35:34::DEBUG::common_utils:<u></u>:473::root:: stderr = Redirecting to /bin/systemctl stop  httpd.service<br>
<br>
2013-03-06 14:35:34::DEBUG::common_utils:<u></u>:474::root:: retcode = 0<br>
2013-03-06 14:35:34::DEBUG::common_utils:<u></u>:1228::root:: starting httpd<br>
2013-03-06 14:35:34::DEBUG::common_utils:<u></u>:1275::root:: executing action httpd on service start<br>
2013-03-06 14:35:34::DEBUG::common_utils:<u></u>:434::root:: Executing command --&gt; &#39;/sbin/service httpd start&#39;<br>
2013-03-06 14:35:36::DEBUG::common_utils:<u></u>:472::root:: output = <br>
2013-03-06 14:35:36::DEBUG::common_utils:<u></u>:473::root:: stderr = Redirecting to /bin/systemctl start  httpd.service<br>
<br>
2013-03-06 14:35:36::DEBUG::common_utils:<u></u>:474::root:: retcode = 0<br>
2013-03-06 14:35:36::DEBUG::setup_<u></u>sequences::59::root:: running makeStorageDir<br>
2013-03-06 14:35:36::DEBUG::all_in_one_<u></u>100::368::root:: Creating/Verifying local domain path<br>
2013-03-06 14:35:36::DEBUG::all_in_one_<u></u>100::374::root:: Setting selinux context<br>
2013-03-06 14:35:36::DEBUG::nfsutils::36:<u></u>:root:: setting selinux context for /firebackup/ovirt/vms<br>
2013-03-06 14:35:36::DEBUG::common_utils:<u></u>:434::root:: Executing command --&gt; &#39;/usr/sbin/semanage fcontext -a -t public_content_rw_t /firebackup/ovirt/vms(/.*)?&#39;<br>
2013-03-06 14:35:39::DEBUG::common_utils:<u></u>:472::root:: output = <br>
2013-03-06 14:35:39::DEBUG::common_utils:<u></u>:473::root:: stderr = <br>
2013-03-06 14:35:39::DEBUG::common_utils:<u></u>:474::root:: retcode = 0<br>
2013-03-06 14:35:39::DEBUG::common_utils:<u></u>:434::root:: Executing command --&gt; &#39;/sbin/restorecon -r /firebackup/ovirt/vms&#39;<br>
2013-03-06 14:35:39::DEBUG::common_utils:<u></u>:472::root:: output = <br>
2013-03-06 14:35:39::DEBUG::common_utils:<u></u>:473::root:: stderr = <br>
2013-03-06 14:35:39::DEBUG::common_utils:<u></u>:474::root:: retcode = 0<br>
2013-03-06 14:35:39::DEBUG::setup_<u></u>sequences::59::root:: running waitForJbossUp<br>
2013-03-06 14:35:39::DEBUG::all_in_one_<u></u>100::445::root:: Checking JBoss status.<br>
2013-03-06 14:35:39::INFO::all_in_one_<u></u>100::448::root:: JBoss is up and running.<br>
2013-03-06 14:35:39::DEBUG::setup_<u></u>sequences::59::root:: running initAPI<br>
2013-03-06 14:35:39::DEBUG::all_in_one_<u></u>100::240::root:: Initiating the API object<br>
2013-03-06 14:35:41::DEBUG::setup_<u></u>sequences::59::root:: running createDC<br>
2013-03-06 14:35:41::DEBUG::all_in_one_<u></u>100::256::root:: Creating the local datacenter<br>
2013-03-06 14:35:42::DEBUG::setup_<u></u>sequences::59::root:: running createCluster<br>
2013-03-06 14:35:42::DEBUG::all_in_one_<u></u>100::267::root:: Creating the local cluster<br>
2013-03-06 14:35:43::DEBUG::setup_<u></u>sequences::59::root:: running createHost<br>
2013-03-06 14:35:43::DEBUG::all_in_one_<u></u>100::280::root:: Adding the local host<br>
2013-03-06 14:35:44::DEBUG::setup_<u></u>sequences::59::root:: running waitForHostUp<br>
2013-03-06 14:35:44::DEBUG::all_in_one_<u></u>100::297::root:: Waiting for host to become operational<br>
2013-03-06 14:35:45::DEBUG::all_in_one_<u></u>100::300::root:: current host status is: installing<br>
2013-03-06 14:35:45::DEBUG::all_in_one_<u></u>100::311::root:: Traceback (most recent call last):<br>
  File &quot;/usr/share/ovirt-engine/<u></u>scripts/plugins/all_in_one_<u></u>100.py&quot;, line 308, in isHostUp<br>
    raise Exception(INFO_CREATE_HOST_<u></u>WAITING_UP)<br>
Exception: Waiting for the host to start<br>
<br>
2013-03-06 14:35:50::DEBUG::all_in_one_<u></u>100::297::root:: Waiting for host to become operational<br>
2013-03-06 14:35:50::DEBUG::all_in_one_<u></u>100::300::root:: current host status is: installing<br>
2013-03-06 14:35:50::DEBUG::all_in_one_<u></u>100::311::root:: Traceback (most recent call last):<br>
  File &quot;/usr/share/ovirt-engine/<u></u>scripts/plugins/all_in_one_<u></u>100.py&quot;, line 308, in isHostUp<br>
    raise Exception(INFO_CREATE_HOST_<u></u>WAITING_UP)<br>
Exception: Waiting for the host to start<br>
<br>
2013-03-06 14:35:55::DEBUG::all_in_one_<u></u>100::297::root:: Waiting for host to become operational<br>
2013-03-06 14:35:56::DEBUG::all_in_one_<u></u>100::300::root:: current host status is: install_failed<br>
2013-03-06 14:35:56::DEBUG::all_in_one_<u></u>100::311::root:: Traceback (most recent call last):<br>
  File &quot;/usr/share/ovirt-engine/<u></u>scripts/plugins/all_in_one_<u></u>100.py&quot;, line 306, in isHostUp<br>
    raise utils.RetryFailException(<u></u>ERROR_CREATE_HOST_FAILED)<br>
RetryFailException: Error: Host was found in a &#39;Failed&#39; state. Please check engine and bootstrap installation logs.<br>
<br>
2013-03-06 14:35:56::DEBUG::setup_<u></u>sequences::62::root:: Traceback (most recent call last):<br>
  File &quot;/usr/share/ovirt-engine/<u></u>scripts/setup_sequences.py&quot;, line 60, in run<br>
    function()<br>
  File &quot;/usr/share/ovirt-engine/<u></u>scripts/plugins/all_in_one_<u></u>100.py&quot;, line 294, in waitForHostUp<br>
    utils.retry(isHostUp, tries=120, timeout=600, sleep=5)<br>
  File &quot;/usr/share/ovirt-engine/<u></u>scripts/common_utils.py&quot;, line 1009, in retry<br>
    raise e<br>
RetryFailException: Error: Host was found in a &#39;Failed&#39; state. Please check engine and bootstrap installation logs.<br>
<br>
2013-03-06 14:35:56::DEBUG::engine-setup:<u></u>:1948::root:: *** The following params were used as user input:<br>
2013-03-06 14:35:56::DEBUG::engine-setup:<u></u>:1953::root:: override-httpd-config: yes<br>
2013-03-06 14:35:56::DEBUG::engine-setup:<u></u>:1953::root:: http-port: 80<br>
2013-03-06 14:35:56::DEBUG::engine-setup:<u></u>:1953::root:: https-port: 443<br>
2013-03-06 14:35:56::DEBUG::engine-setup:<u></u>:1953::root:: random-passwords: no<br>
2013-03-06 14:35:56::DEBUG::engine-setup:<u></u>:1953::root:: mac-range: 00:1A:4A:10:FF:00-00:1A:4A:10:<u></u>FF:FF<br>
2013-03-06 14:35:56::DEBUG::engine-setup:<u></u>:1953::root:: host-fqdn: <a href="http://firelap.usc.unirede.net" target="_blank">firelap.usc.unirede.net</a><br>
2013-03-06 14:35:56::DEBUG::engine-setup:<u></u>:1953::root:: auth-pass: ********<br>
2013-03-06 14:35:56::DEBUG::engine-setup:<u></u>:1953::root:: org-name: <a href="http://firelap.usc.unirede.net" target="_blank">firelap.usc.unirede.net</a><br>
2013-03-06 14:35:56::DEBUG::engine-setup:<u></u>:1953::root:: application-mode: both<br>
2013-03-06 14:35:56::DEBUG::engine-setup:<u></u>:1953::root:: default-dc-type: NFS<br>
2013-03-06 14:35:56::DEBUG::engine-setup:<u></u>:1953::root:: db-remote-install: local<br>
2013-03-06 14:35:56::DEBUG::engine-setup:<u></u>:1953::root:: db-host: localhost<br>
2013-03-06 14:35:56::DEBUG::engine-setup:<u></u>:1953::root:: db-local-pass: ********<br>
2013-03-06 14:35:56::DEBUG::engine-setup:<u></u>:1953::root:: nfs-mp: /firebackup/********/iso<br>
2013-03-06 14:35:56::DEBUG::engine-setup:<u></u>:1953::root:: iso-domain-name: ISO_DOMAIN<br>
2013-03-06 14:35:56::DEBUG::engine-setup:<u></u>:1953::root:: config-nfs: yes<br>
2013-03-06 14:35:56::DEBUG::engine-setup:<u></u>:1953::root:: override-firewall: IPTables<br>
2013-03-06 14:35:56::DEBUG::engine-setup:<u></u>:1953::root:: config-allinone: yes<br>
2013-03-06 14:35:56::DEBUG::engine-setup:<u></u>:1953::root:: storage-path: /firebackup/********/vms<br>
2013-03-06 14:35:56::DEBUG::engine-setup:<u></u>:1953::root:: superuser-pass: ********<br>
2013-03-06 14:35:56::ERROR::engine-setup:<u></u>:2369::root:: Traceback (most recent call last):<br>
  File &quot;/bin/engine-setup&quot;, line 2363, in &lt;module&gt;<br>
    main(confFile)<br>
  File &quot;/bin/engine-setup&quot;, line 2146, in main<br>
    runSequences()<br>
  File &quot;/bin/engine-setup&quot;, line 2068, in runSequences<br>
    controller.runAllSequences()<br>
  File &quot;/usr/share/ovirt-engine/<u></u>scripts/setup_controller.py&quot;, line 54, in runAllSequences<br>
    sequence.run()<br>
  File &quot;/usr/share/ovirt-engine/<u></u>scripts/setup_sequences.py&quot;, line 154, in run<br>
    step.run()<br>
  File &quot;/usr/share/ovirt-engine/<u></u>scripts/setup_sequences.py&quot;, line 60, in run<br>
    function()<br>
  File &quot;/usr/share/ovirt-engine/<u></u>scripts/plugins/all_in_one_<u></u>100.py&quot;, line 294, in waitForHostUp<br>
    utils.retry(isHostUp, tries=120, timeout=600, sleep=5)<br>
  File &quot;/usr/share/ovirt-engine/<u></u>scripts/common_utils.py&quot;, line 1009, in retry<br>
    raise e<br>
RetryFailException: Error: Host was found in a &#39;Failed&#39; state. Please check engine and bootstrap installation logs.<br>
<br>
   Thnkz for attention. <br>
<br>
Marcelo Barbosa<br>
<a href="mailto:mr.marcelo.barbosa@gmail.com" target="_blank">mr.marcelo.barbosa@gmail.com</a><br>
<br>
<br>
</blockquote>
 <br>
______________________________<u></u>_________________<br>
Users mailing list<br>
<a href="mailto:Users@ovirt.org" target="_blank">Users@ovirt.org</a><br>
<a href="http://lists.ovirt.org/mailman/listinfo/users" target="_blank">http://lists.ovirt.org/<u></u>mailman/listinfo/users</a><br>
<br>
<br>
<br>
</blockquote>
 <br>
</blockquote>
 <br>
<br>
</blockquote>
 <br>
</blockquote>
<br>
<br>
</blockquote>
<br>
<br>
</blockquote>
<br>
</div></div></blockquote></div><br></div>