I tried to create a gluster volume on the georep node by running:

gluster volume create engine-rep replica 1 georep.nwfiber.com:/mnt/gluster/engine-rep

I got back an error saying replica must be > 1.  So I tried to create it again:

gluster volume create engine-rep replica 2 georep.nwfiber.com:/mnt/gluster/engine-rep server2.nwfiber.com:/mnt/gluster/engine-rep

where server2 did not exist.  That failed too, but I don't recall the error message.

gluster is installed, but when I try and start it with the init script, it fails to start with a complaint about reading the block file; my googling indicated that's the error you get until you've created a gluster volume, and that was the first clue to me that maybe I needed to create one first.

So, how do I create a replica 1 volume?


Thinking way ahead, I have a related replica question:  Currently my ovirt nodes are also my gluster nodes (replica 2 arbitrar 1).  Eventually I'll want to pull my gluster off onto dedicated hardware I suspect.  If I do so, do I need 3 servers, or is a replica 2 sufficient?  I guess I could have an ovirt node continue to be an arbitrar...  I would eventually like to distribute my ovirt cluster accross multiple locations with the option for remote failover (say location A looses all its network and/or power; have important VMs started at location B in addition to location B's normal VMs).  I assume at this point the recommended arch would be:

2 Gluster servers at each location
Each location has a gluster volume for that location, and is georep for the other location (so all my data will physically exist on 4 gluster servers).  I probably won't have more than 2 or 3 ovirt hosts at each location, so I don't expect this to be a "heavy use" system.

Am I on track?  I'd be interested to learn what others suggest for this deployment model.

On Sun, May 14, 2017 at 11:09 PM, Sahina Bose <sabose@redhat.com> wrote:
Adding Aravinda

On Sat, May 13, 2017 at 11:21 PM, Jim Kusznir <jim@palousetech.com> wrote:
Hi All:

I've been trying to set up georeplication for a while now, but can't seem to make it work.  I've found documentation on the web (mostly https://gluster.readthedocs.io/en/refactor/Administrator%20Guide/Geo%20Replication/), and I found http://blog.gluster.org/2015/09/introducing-georepsetup-gluster-geo-replication-setup-tool/

Unfortunately, it seems that some critical steps are missing from both, and I can't figure out for sure what they are.

My environment:

Production: replica 2 + arbitrator running on my 3-node oVirt cluster, 3 volumes (engine, data, iso).

New geo-replication: Raspberry Pi3 with USB hard drive shoved in some other data closet off-site.

I've installed rasbian-lite, and after much fighting, got glusterfs-*-3.8.11 installed.  I've created my mountpoint (USB hard drive, much larger than my gluster volumes), and then ran the command.  I get this far:

[    OK] georep.nwfiber.com is Reachable(Port 22)
[    OK] SSH Connection established root@georep.nwfiber.com
[    OK] Master Volume and Slave Volume are compatible (Version: 3.8.11)
[NOT OK] Unable to Mount Gluster Volume georep.nwfiber.com:engine-rep

Trying it with the steps in the gluster docs also has the same problem.  No long files are generated on the slave.  Log files on the master include: 

[root@ovirt1 geo-replication]# more georepsetup.mount.log
[2017-05-13 17:26:27.318599] I [MSGID: 100030] [glusterfsd.c:2454:main] 0-glusterfs: Started running glusterfs version 3.8.11 (args:
 glusterfs --xlator-option="*dht.lookup-unhashed=off" --volfile-server localhost --volfile-id engine -l /var/log/glusterfs/geo-repli
cation/georepsetup.mount.log --client-pid=-1 /tmp/georepsetup_wZtfkN)
[2017-05-13 17:26:27.341170] I [MSGID: 101190] [event-epoll.c:628:event_dispatch_epoll_worker] 0-epoll: Started thread with index 1
[2017-05-13 17:26:27.341260] E [socket.c:2309:socket_connect_finish] 0-glusterfs: connection to ::1:24007 failed (Connection refused
)
[2017-05-13 17:26:27.341846] E [glusterfsd-mgmt.c:1908:mgmt_rpc_notify] 0-glusterfsd-mgmt: failed to connect with remote-host: local
host (Transport endpoint is not connected)
[2017-05-13 17:26:31.335849] I [MSGID: 101190] [event-epoll.c:628:event_dispatch_epoll_worker] 0-epoll: Started thread with index 2
[2017-05-13 17:26:31.337545] I [MSGID: 114020] [client.c:2356:notify] 0-engine-client-0: parent translators are ready, attempting co
nnect on transport
[2017-05-13 17:26:31.344485] I [MSGID: 114020] [client.c:2356:notify] 0-engine-client-1: parent translators are ready, attempting co
nnect on transport
[2017-05-13 17:26:31.345146] I [rpc-clnt.c:1965:rpc_clnt_reconfig] 0-engine-client-0: changing port to 49157 (from 0)
[2017-05-13 17:26:31.350868] I [MSGID: 114020] [client.c:2356:notify] 0-engine-client-2: parent translators are ready, attempting co
nnect on transport
[2017-05-13 17:26:31.355946] I [MSGID: 114057] [client-handshake.c:1440:select_server_supported_programs] 0-engine-client-0: Using P
rogram GlusterFS 3.3, Num (1298437), Version (330)
[2017-05-13 17:26:31.356280] I [rpc-clnt.c:1965:rpc_clnt_reconfig] 0-engine-client-1: changing port to 49157 (from 0)
Final graph:
+------------------------------------------------------------------------------+
  1: volume engine-client-0
  2:     type protocol/client
  3:     option clnt-lk-version 1
  4:     option volfile-checksum 0
  5:     option volfile-key engine
  6:     option client-version 3.8.11
  7:     option process-uuid ovirt1.nwfiber.com-25660-2017/05/13-17:26:27:311929-engine-client-0-0-0
  8:     option fops-version 1298437
  9:     option ping-timeout 30
 10:     option remote-host ovirt1.nwfiber.com
 11:     option remote-subvolume /gluster/brick1/engine
 12:     option transport-type socket
 13:     option username 028984cf-0399-42e6-b04b-bb9b1685c536
 14:     option password eae737cc-9659-405f-865e-9a7ef97a3307
 15:     option filter-O_DIRECT off
 16:     option send-gids true
 17: end-volume
 18:
 19: volume engine-client-1
 20:     type protocol/client
 21:     option ping-timeout 30
 22:     option remote-host ovirt2.nwfiber.com
 23:     option remote-subvolume /gluster/brick1/engine
 24:     option transport-type socket
 25:     option username 028984cf-0399-42e6-b04b-bb9b1685c536
 26:     option password eae737cc-9659-405f-865e-9a7ef97a3307
 27:     option filter-O_DIRECT off
 28:     option send-gids true
 29: end-volume
 30:
 31: volume engine-client-2
 32:     type protocol/client
 33:     option ping-timeout 30
 34:     option remote-host ovirt3.nwfiber.com
 35:     option remote-subvolume /gluster/brick1/engine
 36:     option transport-type socket
 37:     option username 028984cf-0399-42e6-b04b-bb9b1685c536
 38:     option password eae737cc-9659-405f-865e-9a7ef97a3307
 39:     option filter-O_DIRECT off
 40:     option send-gids true
 41: end-volume
 42:
 43: volume engine-replicate-0
 44:     type cluster/replicate
 45:     option arbiter-count 1
 46:     option data-self-heal-algorithm full
 47:     option eager-lock enable
 48:     option quorum-type auto
 49:     option shd-max-threads 6
 50:     option shd-wait-qlength 10000
 51:     option locking-scheme granular
 52:     subvolumes engine-client-0 engine-client-1 engine-client-2
 53: end-volume
 54:
 55: volume engine-dht
 56:     type cluster/distribute
 57:     option lock-migration off
 58:     subvolumes engine-replicate-0
 59: end-volume
 60:
 61: volume engine-shard
 62:     type features/shard
 63:     option shard-block-size 512MB
 64:     subvolumes engine-dht
 65: end-volume
 66:
 67: volume engine-write-behind
 68:     type performance/write-behind
 69:     option strict-O_DIRECT on
 70:     subvolumes engine-shard
 71: end-volume
 72:
 73: volume engine-readdir-ahead
 74:     type performance/readdir-ahead
 75:     subvolumes engine-write-behind
 76: end-volume
 77:
 78: volume engine-open-behind
 79:     type performance/open-behind
 80:     subvolumes engine-readdir-ahead
 81: end-volume
 82:
 83: volume engine
 84:     type debug/io-stats
 85:     option log-level INFO
 86:     option latency-measurement off
 87:     option count-fop-hits off
 88:     subvolumes engine-open-behind
 89: end-volume
 90:
 91: volume meta-autoload
 92:     type meta
 93:     subvolumes engine
 94: end-volume
 95:
+------------------------------------------------------------------------------+
[2017-05-13 17:26:31.360579] I [MSGID: 114046] [client-handshake.c:1216:client_setvolume_cbk] 0-engine-client-0: Connected to engine
-client-0, attached to remote volume '/gluster/brick1/engine'.
[2017-05-13 17:26:31.360599] I [MSGID: 114047] [client-handshake.c:1227:client_setvolume_cbk] 0-engine-client-0: Server and Client l
k-version numbers are not same, reopening the fds
[2017-05-13 17:26:31.360707] I [MSGID: 108005] [afr-common.c:4387:afr_notify] 0-engine-replicate-0: Subvolume 'engine-client-0' came
 back up; going online.
[2017-05-13 17:26:31.360793] I [MSGID: 114035] [client-handshake.c:202:client_set_lk_version_cbk] 0-engine-client-0: Server lk versi
on = 1
[2017-05-13 17:26:31.361284] I [rpc-clnt.c:1965:rpc_clnt_reconfig] 0-engine-client-2: changing port to 49158 (from 0)
[2017-05-13 17:26:31.365070] I [MSGID: 114057] [client-handshake.c:1440:select_server_supported_programs] 0-engine-client-1: Using P
rogram GlusterFS 3.3, Num (1298437), Version (330)
[2017-05-13 17:26:31.365788] I [MSGID: 114046] [client-handshake.c:1216:client_setvolume_cbk] 0-engine-client-1: Connected to engine
-client-1, attached to remote volume '/gluster/brick1/engine'.
[2017-05-13 17:26:31.365821] I [MSGID: 114047] [client-handshake.c:1227:client_setvolume_cbk] 0-engine-client-1: Server and Client l
k-version numbers are not same, reopening the fds
[2017-05-13 17:26:31.366059] I [MSGID: 114035] [client-handshake.c:202:client_set_lk_version_cbk] 0-engine-client-1: Server lk versi
on = 1
[2017-05-13 17:26:31.369948] I [MSGID: 114057] [client-handshake.c:1440:select_server_supported_programs] 0-engine-client-2: Using P
rogram GlusterFS 3.3, Num (1298437), Version (330)
[2017-05-13 17:26:31.370657] I [MSGID: 114046] [client-handshake.c:1216:client_setvolume_cbk] 0-engine-client-2: Connected to engine
-client-2, attached to remote volume '/gluster/brick1/engine'.
[2017-05-13 17:26:31.370683] I [MSGID: 114047] [client-handshake.c:1227:client_setvolume_cbk] 0-engine-client-2: Server and Client l
k-version numbers are not same, reopening the fds
[2017-05-13 17:26:31.383548] I [MSGID: 114035] [client-handshake.c:202:client_set_lk_version_cbk] 0-engine-client-2: Server lk versi
on = 1
[2017-05-13 17:26:31.383649] I [fuse-bridge.c:4147:fuse_init] 0-glusterfs-fuse: FUSE inited with protocol versions: glusterfs 7.24 k
ernel 7.22
[2017-05-13 17:26:31.383676] I [fuse-bridge.c:4832:fuse_graph_sync] 0-fuse: switched to graph 0
[2017-05-13 17:26:31.385453] I [MSGID: 108031] [afr-common.c:2157:afr_local_discovery_cbk] 0-engine-replicate-0: selecting local rea
d_child engine-client-0
[2017-05-13 17:26:31.396741] I [fuse-bridge.c:5080:fuse_thread_proc] 0-fuse: unmounting /tmp/georepsetup_wZtfkN
[2017-05-13 17:26:31.397086] W [glusterfsd.c:1327:cleanup_and_exit] (-->/lib64/libpthread.so.0(+0x7dc5) [0x7f8838df6dc5] -->glusterf
s(glusterfs_sigwaiter+0xe5) [0x7f883a488cd5] -->glusterfs(cleanup_and_exit+0x6b) [0x7f883a488b4b] ) 0-: received signum (15), shutti
ng down
[2017-05-13 17:26:31.397112] I [fuse-bridge.c:5788:fini] 0-fuse: Unmounting '/tmp/georepsetup_wZtfkN'.
[2017-05-13 17:26:31.413901] I [MSGID: 100030] [glusterfsd.c:2454:main] 0-glusterfs: Started running glusterfs version 3.8.11 (args:
 glusterfs --xlator-option="*dht.lookup-unhashed=off" --volfile-server georep.nwfiber.com --volfile-id engine -l /var/log/glusterfs/
geo-replication/georepsetup.mount.log --client-pid=-1 /tmp/georepsetup_M5poIr)
[2017-05-13 17:26:31.458733] I [MSGID: 101190] [event-epoll.c:628:event_dispatch_epoll_worker] 0-epoll: Started thread with index 1
[2017-05-13 17:26:31.458833] E [socket.c:2309:socket_connect_finish] 0-glusterfs: connection to 192.168.8.126:24007 failed (Connecti
on refused)
[2017-05-13 17:26:31.458886] E [glusterfsd-mgmt.c:1908:mgmt_rpc_notify] 0-glusterfsd-mgmt: failed to connect with remote-host: geore
p.nwfiber.com (Transport endpoint is not connected)
[2017-05-13 17:26:31.458900] I [glusterfsd-mgmt.c:1926:mgmt_rpc_notify] 0-glusterfsd-mgmt: Exhausted all volfile servers
[2017-05-13 17:26:31.459173] W [glusterfsd.c:1327:cleanup_and_exit] (-->/lib64/libgfrpc.so.0(rpc_clnt_notify+0xdb) [0x7f18d6c89aab]
-->glusterfs(+0x10309) [0x7f18d73b9309] -->glusterfs(cleanup_and_exit+0x6b) [0x7f18d73b2b4b] ) 0-: received signum (1), shutting dow
n
[2017-05-13 17:26:31.459218] I [fuse-bridge.c:5788:fini] 0-fuse: Unmounting '/tmp/georepsetup_M5poIr'.
[2017-05-13 17:26:31.459887] W [glusterfsd.c:1327:cleanup_and_exit] (-->/lib64/libpthread.so.0(+0x7dc5) [0x7f18d5d20dc5] -->glusterf
s(glusterfs_sigwaiter+0xe5) [0x7f18d73b2cd5] -->glusterfs(cleanup_and_exit+0x6b) [0x7f18d73b2b4b] ) 0-: received signum (15), shutti
ng down

I don't know what to make of that.

On a whim, I thought that perhaps the georep setup does not set up the remote volume (I assumed it would, I thought that was what the ssh was required for, and none of the instructions mentioned create your destination (replication) volume.  So I tried to create it, but it won't let me create a volume with replica 1.  this is already a backup, I don't need a backup of a backup.  This further supported my thought that the volume needs to be created by the georep setup commands.

The destination or slave volume needs to be created prior to setting up the geo-replication session. You should be able to create a replica 1 volume as destination volume. How did you try to create this?

Is glusterd running on georep.nwfiber.com ? And are the gluster ports open?


Where am I wrong / what do I need to do to fix this?

--Jim

_______________________________________________
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users