On Wed, Dec 18, 2013 at 12:12 PM, Gabi C <gabicr@gmail.com> wrote:

node 1:

[root@virtual5 admin]# cat /config/files
/etc/fstab
/etc/shadow
/etc/default/ovirt
/etc/ssh/ssh_host_key
/etc/ssh/ssh_host_key.pub
/etc/ssh/ssh_host_dsa_key
/etc/ssh/ssh_host_dsa_key.pub
/etc/ssh/ssh_host_rsa_key
/etc/ssh/ssh_host_rsa_key.pub
/etc/rsyslog.conf
/etc/libvirt/libvirtd.conf
/etc/libvirt/passwd.db
/etc/passwd
/etc/sysconfig/network
/etc/collectd.conf
/etc/libvirt/qemu/networks
/etc/ssh/sshd_config
/etc/pki
/etc/logrotate.d/ovirt-node
/var/lib/random-seed
/etc/iscsi/initiatorname.iscsi
/etc/libvirt/qemu.conf
/etc/sysconfig/libvirtd
/etc/logrotate.d/libvirtd
/etc/multipath.conf
/etc/hosts
/etc/sysconfig/network-scripts/ifcfg-enp3s0
/etc/sysconfig/network-scripts/ifcfg-lo
/etc/ntp.conf
/etc/shadow
/etc/vdsm-reg/vdsm-reg.conf
/etc/shadow
/etc/shadow
/etc/sysconfig/network-scripts/ifcfg-ovirtmgmt
/etc/sysconfig/network-scripts/route-ovirtmgmt
/etc/sysconfig/network-scripts/rule-ovirtmgmt
/root/.ssh/authorized_keys
/etc/vdsm/vdsm.id
/etc/udev/rules.d/12-ovirt-iosched.rules
/etc/vdsm/vdsm.conf
/etc/sysconfig/iptables
/etc/resolv.conf
/etc/sysconfig/network-scripts/ifcfg-VPO_IPPROXY
/etc/sysconfig/network-scripts/ifcfg-enp6s0
/etc/sysconfig/network-scripts/ifcfg-enp6s0.50
/etc/glusterfs/glusterd.vol
/etc/selinux/config

node 2:

[root@virtual4 ~]# cat /config/files
/etc/fstab
/etc/shadow
/etc/default/ovirt
/etc/ssh/ssh_host_key
/etc/ssh/ssh_host_key.pub
/etc/ssh/ssh_host_dsa_key
/etc/ssh/ssh_host_dsa_key.pub
/etc/ssh/ssh_host_rsa_key
/etc/ssh/ssh_host_rsa_key.pub
/etc/rsyslog.conf
/etc/libvirt/libvirtd.conf
/etc/libvirt/passwd.db
/etc/passwd
/etc/sysconfig/network
/etc/collectd.conf
/etc/libvirt/qemu/networks
/etc/ssh/sshd_config
/etc/pki
/etc/logrotate.d/ovirt-node
/var/lib/random-seed
/etc/iscsi/initiatorname.iscsi
/etc/libvirt/qemu.conf
/etc/sysconfig/libvirtd
/etc/logrotate.d/libvirtd
/etc/multipath.conf
/etc/hosts
/etc/sysconfig/network-scripts/ifcfg-enp3s0
/etc/sysconfig/network-scripts/ifcfg-lo
/etc/shadow
/etc/shadow
/etc/vdsm-reg/vdsm-reg.conf
/etc/sysconfig/network-scripts/ifcfg-ovirtmgmt
/etc/sysconfig/network-scripts/route-ovirtmgmt
/etc/sysconfig/network-scripts/rule-ovirtmgmt
/root/.ssh/authorized_keys
/etc/shadow
/etc/shadow
/etc/vdsm/vdsm.id
/etc/udev/rules.d/12-ovirt-iosched.rules
/etc/sysconfig/iptables
/etc/vdsm/vdsm.conf
/etc/shadow
/etc/resolv.conf
/etc/ntp.conf
/etc/sysconfig/network-scripts/ifcfg-VPO_IPPROXY
/etc/sysconfig/network-scripts/ifcfg-enp6s0
/etc/sysconfig/network-scripts/ifcfg-enp6s0.50
/etc/glusterfs/glusterd.vol
/etc/selinux/config

On Wed, Dec 18, 2013 at 12:07 PM, Fabian Deutsch <fabiand@redhat.com> wrote:

Am Mittwoch, den 18.12.2013, 12:03 +0200 schrieb Gabi C:

> So here it is:
>
>
> in tab volumes add new volume - Replicated, then added storage -
> data/glusterfs. Then I impoerted Vm, ran them and at some point,
> needing some space for a Redhat Satellite instance I decided to put
> both node in maintenace stop them add new disk devices and restart,
> but after restart the gluster volume defined under Volumes Tab
> vanished!

Antoni,

can you tell what log files to look at to find out why that storage
domain vanished - from a Engine side?

And do you know what files related to gluster are changed on the Node
side?

Gabi,

could you please provide the contents of /config/files on the Node.

> Glusterfs data goes under /data directory which was automatically
> configured when I installed the node.

Yep, /data is on the Data LV - that should be good.

- fabian

>
>
> On Wed, Dec 18, 2013 at 11:45 AM, Fabian Deutsch <fabiand@redhat.com>
> wrote:
> Am Mittwoch, den 18.12.2013, 11:42 +0200 schrieb Gabi C:
> > Yes, it is the VM part..I just run into an issue. My setup
> consist in
> > 2 nodes with glusterfs and after adding supplemental hard
> disk, after
> > reboot I've lost glusterfs volumes!
>
>
> Could you exactly explain what you configured?
>
> >
> > How can I persist any configuration on node and I refer here
> to
> > ''setenforce 0'' - for ssh login to work- and further
>
>
> How changes can be persisted on Node can be found here:
> http://www.ovirt.org/Node_Troubleshooting#Making_changes_on_the_host
>
> Do you know into what path the glusterfs data goes? Or is it
> written
> directly onto a disk/LV?
>
> - fabian
>
> > "" http://www.ovirt.org/Features/GlusterFS_Storage_Domain
> > * option rpc-auth-allow-insecure on ==> in
> glusterd.vol (ensure
> > u restart glusterd service... for this to take
> effect)
>
> > * volume set <volname> server.allow-insecure on ==>
> (ensure u
> > stop and start the volume.. for this to take
> effect)''
> >
> >
> > Thanks!
> >
> >
> >
> >
> >
> > On Wed, Dec 18, 2013 at 11:35 AM, Fabian Deutsch
> <fabiand@redhat.com>
> > wrote:
> > Am Mittwoch, den 18.12.2013, 08:34 +0200 schrieb
> Gabi C:
> > > Hello!
> > >
> > >
> > > In order to increase disk space I want to add a
> new disk
> > drive to
> > > ovirt node. After adding this should I proceed as
> "normal" -
> > pvcreate,
> > > vgcreate, lvcreate and so on - or these
> configuration will
> > not
> > > persist?
> >
> >
> > Hey Gabi,
> >
> > basically plain LVM is used in Node - so yes
> pvcreate and
> > lvextend can
> > be used.
> > What storage part do you want to extend? The part
> where the
> > VMs reside?
> > You will also need to take care to extend the
> filesystem.
> >
> > - fabian
> >
> >
> >
>
>
>
>