Hello,

Thanks for the update mates.

Silly me! I loaded wrong ISO apparently. I shall update once am through the next installation.

Thanks again!

Regards,
Keyur


On Fri, Nov 9, 2012 at 8:49 PM, Itamar Heim <iheim@redhat.com> wrote:
On 11/09/2012 03:33 PM, Keyur Makwana wrote:
Hello,

Thanks for having a look at this issue.

the cluster level supported by this node is 3.0.
you should change your cluster level to 3.0 to use it (your DC should also be 3.0. you may need to create a new DC, since you can't lower a DC level if it has clusters in it iirc).

but you are using in incompatible engine (ovirt) and node (rhev).
they have different compatibility levels even if the numbers are the same.



On ovirt-engine - either of the command did not work.

Here is the output from the hypervisor.

[root@h1 ~]# vdsClient -s 0 getVdsCaps
HBAInventory = {'iSCSI': [{'InitiatorName':
'iqn.1994-05.com.redhat:5e25411e9039'}], 'FC': [{'wwpn':
'10000000c9cb2826', 'wwnn': '20000000c9cb2826', 'model': 'LPe1205-CIOv -
Emulex LPe1205-CIOv 8Gb 2-port PCIe Fibre Channel Adapter'}, {'wwpn':
'10000000c9cb2827', 'wwnn': '20000000c9cb2827', 'model': 'LPe1205-CIOv -
Emulex LPe1205-CIOv 8Gb 2-port PCIe Fibre Channel Adapter'}]}
ISCSIInitiatorName = iqn.1994-05.com.redhat:5e25411e9039
bondings = {'bond4': {'hwaddr': '00:00:00:00:00:00', 'cfg': {},
'netmask': '', 'addr': '', 'slaves': []}, 'bond0': {'hwaddr':
'00:00:00:00:00:00', 'cfg': {}, 'netmask': '', 'addr': '', 'slaves':
[]}, 'bond1': {'hwaddr': '00:00:00:00:00:00', 'cfg': {}, 'netmask': '',
'addr': '', 'slaves': []}, 'bond2': {'hwaddr': '00:00:00:00:00:00',
'cfg': {}, 'netmask': '', 'addr': '', 'slaves': []}, 'bond3': {'hwaddr':
'00:00:00:00:00:00', 'cfg': {}, 'netmask': '', 'addr': '', 'slaves': []}}
clusterLevels = ['3.0']
cpuCores = 12
cpuFlags =
fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,pdpe1gb,rdtscp,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,xtopology,nonstop_tsc,aperfmperf,pni,pclmulqdq,dtes64,monitor,ds_cpl,vmx,smx,est,tm2,ssse3,cx16,xtpr,pdcm,dca,sse4_1,sse4_2,popcnt,aes,lahf_lm,arat,epb,dts,tpr_shadow,vnmi,flexpriority,ept,vpid,model_486,model_pentium,model_pentium2,model_pentium3,model_pentiumpro,model_qemu32,model_coreduo,model_core2duo,model_n270,model_Conroe,model_Penryn,model_Nehalem,model_Westmere,model_Opteron_G1
cpuModel = Intel(R) Xeon(R) CPU           E5645  @ 2.40GHz
cpuSockets = 2
cpuSpeed = 2400.276
emulatedMachines = ['rhel6.2.0', 'pc', 'rhel6.1.0', 'rhel6.0.0',
'rhel5.5.0', 'rhel5.4.4', 'rhel5.4.0']
guestOverhead = 65
hooks = {'before_vm_start': {'50_vhostmd': {'md5':
'1635e45584995d9ad2629939cb0bcdbf'}}, 'after_vm_destroy': {'50_vhostmd':
{'md5': '7e7509430304099f38e4a9de966af090'}}, 'before_vm_dehibernate':
{'50_vhostmd': {'md5': '1635e45584995d9ad2629939cb0bcdbf'}},
'before_vm_migrate_destination': {'50_vhostmd': {'md5':
'1635e45584995d9ad2629939cb0bcdbf'}}}
kvmEnabled = true
lastClient = 172.29.5.200
lastClientIface = rhevm
management_ip = 172.29.81.141
memSize = 64420
networks = {'rhevm': {'addr': '172.29.81.141', 'cfg': {'IPV6FORWARDING':
'no', 'IPV6INIT': 'no', 'SKIPLIBVIRT': 'True', 'IPADDR':
'172.29.81.141', 'ONBOOT': 'yes', 'DELAY': '0', 'DEVICE': 'rhevm',
'NETMASK': '255.255.255.0', 'BOOTPROTO': 'static', 'IPV6_AUTOCONF':
'no', 'PEERNTP': 'yes', 'TYPE': 'Bridge', 'GATEWAY': '172.29.81.1'},
'ports': ['eth8'], 'netmask': '255.255.255.0', 'stp': 'off', 'gateway':
'172.29.81.1'}}
nics = {'eth9': {'hwaddr': '5C:F3:FC:98:19:82', 'netmask': '', 'speed':
0, 'addr': ''}, 'eth8': {'hwaddr': '5C:F3:FC:98:19:80', 'netmask': '',
'speed': 1000, 'addr': ''}, 'eth7': {'hwaddr': '00:00:C9:D2:16:73',
'netmask': '', 'speed': 0, 'addr': ''}, 'eth6': {'hwaddr':
'00:00:C9:D2:16:6F', 'netmask': '', 'speed': 0, 'addr': ''}, 'eth5':
{'hwaddr': '00:00:C9:D2:16:72', 'netmask': '', 'speed': 0, 'addr': ''},
'eth4': {'hwaddr': '00:00:C9:D2:16:6E', 'netmask': '', 'speed': 0,
'addr': ''}, 'eth3': {'hwaddr': '00:00:C9:D2:16:71', 'netmask': '',
'speed': 0, 'addr': ''}, 'eth2': {'hwaddr': '00:00:C9:D2:16:6D',
'netmask': '', 'speed': 0, 'addr': ''}, 'eth1': {'hwaddr':
'00:00:C9:D2:16:70', 'netmask': '', 'speed': 0, 'addr': ''}, 'eth0':
{'hwaddr': '00:00:C9:D2:16:6C', 'netmask': '', 'speed': 0, 'addr': ''}}
operatingSystem = {'release': '20120510.0.el6_2', 'version': '6.2',
'name': 'RHEV Hypervisor'}
packages2 = {'kernel': {'release': '220.17.1.el6.x86_64', 'buildtime':
1335447433.0, 'version': '2.6.32'}, 'spice-server': {'release': '5.el6',
'buildtime': '1319663438', 'version': '0.8.2'}, 'vdsm': {'release':
'112.12.el6_2', 'buildtime': '1334495504', 'version': '4.9'},
'qemu-kvm': {'release': '2.209.el6_2.5', 'buildtime': '1334776518',
'version': '0.12.1.2'}, 'libvirt': {'release': '23.el6_2.8',
'buildtime': '1333958926', 'version': '0.9.4'}, 'qemu-img': {'release':
'2.209.el6_2.5', 'buildtime': '1334776518', 'version': '0.12.1.2'}}
reservedMem = 256
software_revision = 112.12
software_version = 4.9
supportedProtocols = ['2.2', '2.3']
supportedRHEVMs = ['3.0']
uuid = C12E325E-3D69-11E1-91C1-5CF3FC981980_00:00:C9:D2:16:6C
version_name = Snow Man
vlans = {}
vmTypes = ['kvm']
[root@h1 ~]#

Regards,
Keyur



On Fri, Nov 9, 2012 at 7:36 PM, Yair Zaslavsky <yzaslavs@redhat.com
<mailto:yzaslavs@redhat.com>> wrote:

    For troubleshooting -
    Can you run on your host machine

    vdsClient 0 getVdsCaps (might be vdsClient -s 0 getVdsCaps)

    and send us the results?


    ------------------------------------------------------------------------

        *From: *"Keyur Makwana" <kurmakwana@gmail.com
        <mailto:kurmakwana@gmail.com>>
        *To: *users@ovirt.org <mailto:users@ovirt.org>
        *Sent: *Friday, November 9, 2012 12:50:22 PM
        *Subject: *[Users] Ovirt Host (3.0) compatability issue with

        Cluster (3.1)


        Hello All,

        I am new to Ovirt and trying to Implement Ovirt in my
        organisation with an view to implement complete open source
        virtualization solution instead of using VMware or other Paid once.

        I have installed ovirt-engine on Fedora 17 and have installed
        Ovirt node (Hypervisor) - Red Hat Enterprise Virtualization
        Hypervisor release 6.2 (20120510.0.el6_2)


        Post installation engine started fine but while trying to add
        host its giving me error as below.

        Host host1 is compatible with versions (3.0) and cannot join
        Cluster Default which is set to version 3.1.

        I don't know what exact details I would need to share for
        troubleshooting. Hence I have attached a file with details of
        rpms installed on ovirt-engine and node. ( One may not like to
        scroll the entire file)

        I might be missing something very silly or I may sound too stupid.

        Ovirt masters : Please guide.

        Thanks in advance,
        Keyur


        _______________________________________________
        Users mailing list
        Users@ovirt.org <mailto:Users@ovirt.org>
        http://lists.ovirt.org/mailman/listinfo/users






_______________________________________________
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users