Hello,

More questions on this -- since I have 5 servers . Could the following work ?   Each server has (1) 3TB RAID 6 partition that I want to use for contiguous storage.

Mountpoint for RAID 6 partition (3TB)  /brick  

Server A: VOL1 - Brick 1                                  directory  /brick/brick1 (VOL1 Data brick)                                                                                                    
Server B: VOL1 - Brick 2 + VOL2 - Brick 3      directory  /brick/brick2 (VOL1 Data brick)   /brick/brick3 (VOL2 Arbitrator brick)
Server C: VOL1 - Brick 3                                 directory /brick/brick3  (VOL1 Data brick)  
Server D: VOL2 - Brick 1                                 directory /brick/brick1  (VOL2 Data brick)
Server E  VOL2 - Brick 2                                 directory /brick/brick2  (VOL2 Data brick)

Questions about this configuration
1.  Is it safe to use a  mount point 2 times ?  https://access.redhat.com/documentation/en-us/red_hat_gluster_storage/3.3/html/administration_guide/formatting_and_mounting_bricks#idm139907083110432 says "Ensure that no more than one brick is created from a single mount." In my example I have VOL1 and VOL2 sharing the mountpoint /brick on Server B

2.  Could I start a standard replica3 (VOL1) with 3 data bricks and add 2 additional data bricks plus 1 arbitrator brick (VOL2)  to create a  distributed-replicate cluster providing ~6TB of contiguous storage ?  .
     By contiguous storage I mean that df -h would show ~6 TB disk space.

Thank You For Your Help !!

On Mon, Sep 28, 2020 at 4:04 PM C Williams <cwilliams3320@gmail.com> wrote:
Strahil,

Thank You For Your Help !

On Mon, Sep 28, 2020 at 4:01 PM Strahil Nikolov <hunter86_bg@yahoo.com> wrote:
You can setup your bricks in such way , that each host has at least 1 brick.
For example:
Server A: VOL1 - Brick 1
Server B: VOL1 - Brick 2 + VOL 3 - Brick 3
Server C: VOL1 - Brick 3 + VOL 2 - Brick 2
Server D: VOL2 - brick 1

The most optimal is to find a small system/VM for being an arbiter and having a 'replica 3 arbiter 1' volume.

Best Regards,
Strahil Nikolov





В понеделник, 28 септември 2020 г., 20:46:16 Гринуич+3, Jayme <jaymef@gmail.com> написа:





It might be possible to do something similar as described in the documentation here: https://access.redhat.com/documentation/en-us/red_hat_gluster_storage/3.4/html/administration_guide/creating_arbitrated_replicated_volumes#sect-Create_Multiple_Arbitrated_Volumes -- but I'm not sure if oVirt HCI would support it. You might have to roll out your own GlusterFS storage solution. Someone with more Gluster/HCI knowledge might know better.

On Mon, Sep 28, 2020 at 1:26 PM C Williams <cwilliams3320@gmail.com> wrote:
> Jayme,
>
> Thank for getting back with me ! 
>
> If I wanted to be wasteful with storage, could I start with an initial replica 2 + arbiter and then add 2 bricks to the volume ? Could the arbiter solve split-brains for 4 bricks ?
>
> Thank You For Your Help !
>
> On Mon, Sep 28, 2020 at 12:05 PM Jayme <jaymef@gmail.com> wrote:
>> You can only do HCI in multiple's of 3. You could do a 3 server HCI setup and add the other two servers as compute nodes or you could add a 6th server and expand HCI across all 6
>>
>> On Mon, Sep 28, 2020 at 12:28 PM C Williams <cwilliams3320@gmail.com> wrote:
>>> Hello,
>>>
>>> We recently received 5 servers. All have about 3 TB of storage.
>>>
>>> I want to deploy an oVirt HCI using as much of my storage and compute resources as possible.
>>>
>>> Would oVirt support a "replica 5" HCI (Compute/Gluster) cluster ?
>>>
>>> I have deployed replica 3s and know about replica 2 + arbiter -- but an arbiter would not be applicable here -- since I have equal storage on all of the planned bricks.
>>>
>>> Thank You For Your Help !!
>>>
>>> C Williams
>>> _______________________________________________
>>> Users mailing list -- users@ovirt.org
>>> To unsubscribe send an email to users-leave@ovirt.org
>>> Privacy Statement: https://www.ovirt.org/privacy-policy.html
>>> oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
>>> List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/AXTNUFZ3BASW2CWX7CWTMQS22324J437/
>>>
>>
>
_______________________________________________
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-leave@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/CECMD2SWBSBDAFP3TFMMYWTSV3UKU72E/