Right now as we stand boht ovirt management and LAN data crosses the same interface.
I have two bonds. I want to move ovirt management to its own bond and tag it with vlan id 35.

Than I wan to move my LAN which has no tag and my dmz that does have a tag in to my secondary bond.

The switch is all configured what I am not sure is when making the logical network do I make the LAN a "VM Network"?
And the same question for my dmz tagged vlan...

I attached a small diagram that explains what I am trying to accomplish... I hope :D


Thanks for the help.

Regards,


--
Fernando Fuentes
ffuentes@txweather.org
http://www.txweather.org



On Sun, Jul 31, 2016, at 12:50 PM, Edward Haas wrote:


On Sun, Jul 31, 2016 at 7:19 PM, Fernando Fuentes <ffuentes@darktcp.net> wrote:
Team,

Is it possible to move the ovirt management interface to a separate vlan
and keep it from been on the same interface as my LAN?

Networks, including the management one, can be assign as non-vlan or as vlan on
different nics/bonds.
If you want to assign two or more networks on the same nic/bond, only one can remain
non-vlan, the rest must be set with a vlan.
Vlan networks require that traffic entering the nic/bond is tagged, therefore, the switch port
that the nic is connected to must be set as a trunk.
If you have a specific setup in mind, please draw a network diagram for us.


IE: assign a tag to ovirtmanagement and keep another interface as untag
for my LAN to use with the VM's

Thoughts ideas?

TIA!

Regards,

--
Fernando Fuentes
ffuentes@txweather.org
http://www.txweather.org
_______________________________________________
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users