Manual change of ifcfg files and restart of network service (not reboot) should restore connectivity. Then you should be able to access Engine and setup the new network there so it will be persisted and recognized by oVirt.Glad you managed to run it.2017-11-15 13:45 GMT+02:00 Rudi Ahlers <rudiahlers@gmail.com>:Hi Petr,Thanx for getting back to me.I ended up reinstalling the server. Even after I manually edited the ifcg-ens2f0 and ens2f3 files, and rebooted, networking didn't work well. The gateway was never added (even though it was listed in the files) and the /etc/resolv.conf file kept on being overwritten despite NetworkManager being off.On Wed, Nov 15, 2017 at 1:41 PM, Petr Horacek <phoracek@redhat.com> wrote:Hello,could you please share your current configuration from /etc/sysconfig/network-scripts/ifcfg-{ovirtmgmt,DESIRED_STOR AGE_IFACE,DESIRED_MGMT_IFACE}? Thanks,Petr2017-11-14 23:56 GMT+02:00 Rudi Ahlers <rudiahlers@gmail.com>:______________________________Hi,Can someone please help me "move" the network bridge to another port? I have tried a couple times but it doesn't seem to work.Our internal LAN IP range is 192.168.102.0/24 and the storage area network is 10.10.10.0/24When I installed hosted-engine, I accidently told it to use the 10.10.10.81 interface and a bridge was created accordingly. But I cannot access the 10.10.10.0/24 IP range via our VPN (for security reasons) so I can't access the hosted-engineI tried to remove the bridge interface with brctl but it didn't work as expected.root@virt1 ~]# brctl showbridge name bridge id STP enabled interfaces;vdsmdummy; 8000.000000000000 noovirtmgmt 8000.0cc47aeaffd8 no ens2f0Even though I tried to remove ens2f0 and added ens2f3, it never worked. The bridge / network would stop working and I wold need to login to the server's IPMI card and remove ens2f0.Can someone please guide me in moving the bridge to the 192.168.102.0/24 network?_________________
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
--