On Wed, Dec 6, 2017 at 2:33 PM, Roberto Nunin <robnunin@gmail.com> wrote:

It has worked.

Thanks!

Now additional (hopefully final) question.

In the blog https://ovirt.org/blog/2017/04/up-and-running-with-ovirt-4.1-and-gluster-storage/ is written that selecting cluster, additional hosts should be visible.
These must be imported or detached.

I cannot see the additional hosts. Must I add them as new host ?

Yes, please follow this section:

https://ovirt.org/blog/2017/04/up-and-running-with-ovirt-4.1-and-gluster-storage/#configuring-hosts-two-and-three-for-hosted-engine

Or this means that the deploy hasn't finished correctly ?

Thanks in advance.

2017-12-06 13:47 GMT+01:00 Yedidyah Bar David <didi@redhat.com>:
On Wed, Dec 6, 2017 at 2:29 PM, Simone Tiraboschi <stirabos@redhat.com> wrote:

On Wed, Dec 6, 2017 at 1:23 PM, Roberto Nunin <robnunin@gmail.com> wrote:
I've read the Bugzilla report, but after modify answer file, how to provide it to the Cockpit process ?
I know that in the CLI installation it could be provided as aparameter of the CLI command, but in Cockpit.

You are right, unfortunately we have to fix it: I don't see any possible workaround at cockpit level.

Now pushed a simple fix:

https://gerrit.ovirt.org/85142

You can try using the jenkins-generated RPMs:

http://jenkins.ovirt.org/job/ovirt-hosted-engine-setup_master_check-patch-el7-x86_64/1067/artifact/exported-artifacts/

Directly running hosted-engine-setup from CLI instead should work.

2017-12-06 12:25 GMT+01:00 Yedidyah Bar David <didi@redhat.com>:
On Wed, Dec 6, 2017 at 1:10 PM, Roberto Nunin <robnunin@gmail.com> wrote:
This is the first request, note that do not allow to add CIDR:

2017-12-06 11:54 GMT+01:00 Roberto Nunin <robnunin@gmail.com>:
Yes, both times on Cockpit.

2017-12-06 11:43 GMT+01:00 Simone Tiraboschi <stirabos@redhat.com>:

On Wed, Dec 6, 2017 at 11:38 AM, Roberto Nunin <robnunin@gmail.com> wrote:
Ciao Simone
thanks for really quick answer.

2017-12-06 11:05 GMT+01:00 Simone Tiraboschi <stirabos@redhat.com>:
Ciao Roberto,

On Wed, Dec 6, 2017 at 10:02 AM, Roberto Nunin <robnunin@gmail.com> wrote:
I'm having trouble to deploy one three host hyperconverged lab using iso-image named above.

Please note that ovirt-node-ng-installer-ovirt-4.2-pre-2017120512.iso is still a pre-release software.
Your contribute testing it is really appreciated!

It's a pleasure !.

My test environment is based on HPE BL680cG7 blade servers.
These servers has 6 physical 10GB network interfaces (flexNIC), each one with four profiles (ethernet,FCoE,iSCSI,etc).

I choose one of these six phys interfaces (enp5s0f0) and assigned it a static IPv4 address, for each node.

After node reboot, interface ONBOOT param is still set to no.
Changed via iLO interface to yes and restarted network. Fine.

After gluster setup, with gdeploy script under Cockpit interface, avoiding errors coming from :
/usr/share/gdepply/scripts/blacklist_all_disks.sh, start hosted-engine deploy.

With the new version, I'm having an error never seen before:

The Engine VM (10.114.60.117) and this host (10.114.60.134/24) will not be in the same IP subnet. Static routing configuration are not supported on automatic VM configuration.
Failed to execute stage 'Environment customization': The Engine VM (10.114.60.117) and this host (10.114.60.134/24) will not be in the same IP subnet. Static routing configuration are not supported on automatic VM configuration.
Hosted Engine deployment failed.

There's no input field for HE subnet mask. Anyway in our class-c ovirt management network these ARE in the same subnet.
How to recover from this ? I cannot add /24 CIDR in HE Static IP address field, it isn't allowed.

Incidentally, we also got now another similar report:

https://bugzilla.redhat.com/show_bug.cgi?id=1522712

Perhaps a new regression? Although I can't see where it happened.

10.114.60.117 and 10.114.60.134/24 are in the same IPv4 /24 subnet so it should't fail.
The issue here seams different:

From hosted-engine-setup log I see that you passed the VM IP address via answerfile:
2017-12-06 09:14:30,195+0100 DEBUG otopi.context context.dumpEnvironment:831 ENV OVEHOSTED_VM/cloudinitVMStaticCIDR=str:'10.114.60.117'

while the right syntax should be:
OVEHOSTED_VM/cloudinitVMStaticCIDR=str:10.114.60.117/24

Did you wrote the answerfile by yourself or did you entered the IP address in the cockpit wizard? if so we probably have a regression there.

I've inserted it while providing data for setup, using Cockpit interface. Tried to add CIDR (/24), but it isn't allowed from Cockpit web interface. No manual update of answer file.

Moreover, VM FQDN is asked two times during the deploy process. It's correct ?

No, I don't think so but I don't see it from you logs.
Could you please explain it?

Yes: first time is requested during initial setup of HE VM deploy

The second one, instead, is asked (at least to me ) in this step, after initial setup:

So both on cockpit side?

Some additional, general questions:
NetworkManager: must be disabled deploying HCI solution ? In my attempt, wasn't disabled.

Simone, could you confirm or not that NM must stay in place while deploying ? This qustion was struggling since 3.6...... what is the "best practice" ?
All of mine RHV environments (3.6 - 4.0.1 - 4.1.6 ) have it disabled, but I wasn't able to find any mandatory rule.

In early 3.6 you had to disable it but now you can safely keep it on.

There's some document to follow to perform a correct deploy ?
Is this one still "valid" ? : https://ovirt.org/blog/2017/04/up-and-running-with-ovirt-4.1-and-gluster-storage/

Attached hosted-engine-setup log.
TIA

--
Roberto
110-006-970

_______________________________________________
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

--
Roberto Nunin

--
Roberto Nunin

--
Roberto Nunin

_______________________________________________
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

--
Didi

--
Roberto Nunin

--
Didi

--
Roberto Nunin