Hi,

I'm sorry I forgot, here's the attachement.

On Fri, Nov 21, 2014 at 12:19 PM, Sandvik Agustin <agustinsandvik@gmail.com> wrote:

Hi,

I'm sorry I forgot, here's the attachement.

On Fri, Nov 21, 2014 at 12:17 PM, Coffee Chou <coffee.zyr@gmail.com> wrote:

Hi, Sandvik
    maybe you forgot to attach your log~ that's ovirt-hosted-engine-setup, so you can also attach your setup log:-)

2014-11-21 11:11 GMT+08:00 Sandvik Agustin <agustinsandvik@gmail.com>:

Hi users,

Chou, here's my I already tried your suggestion right now, but it still failed, here's my engine.log and vdsm.log. and one more thing, since the time that I started the installation of ovirt-hosted-engine setup, I starting to have this kind of error message on my /var/log/message.


Nov 21 11:11:20 hmdvhost1 kernel: device-mapper: table: 253:2: multipath: error getting device
Nov 21 11:11:20 hmdvhost1 kernel: device-mapper: ioctl: error adding target to table
Nov 21 11:11:20 hmdvhost1 kernel: device-mapper: table: 253:2: multipath: error getting device
Nov 21 11:11:20 hmdvhost1 kernel: device-mapper: ioctl: error adding target to table
Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: remove map (uevent)
Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: devmap not registered, can't remove
Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: remove map (uevent)
Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: devmap not registered, can't remove
Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: remove map (uevent)
Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: devmap not registered, can't remove
Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: remove map (uevent)
Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: devmap not registered, can't remove

Thanks in advance

Sandvik

On Fri, Nov 21, 2014 at 9:42 AM, Coffee Chou <coffee.zyr@gmail.com> wrote:

Hi, Sandvik
    it's just a suggestion:-)

    i think you can have a try, as i don't know my solution worked or not. maybe there are some other people who have encountered this problem before and they can give you some advice:-)

2014-11-20 22:35 GMT+08:00 Sandvik Agustin <agustinsandvik@gmail.com>:

HI Chou,

Thanks, I will try your solution now, and should I resend this email to users@ovirt.org?

Thanks

Sandvik

On Thu, Nov 20, 2014 at 9:28 AM, Coffee Chou <coffee.zyr@gmail.com> wrote:

Hi, Sandvik
    and please don't send the email to me only but to user mail list, so everybody can help you :-)

2014-11-20 9:17 GMT+08:00 Coffee Chou <coffee.zyr@gmail.com>:

Hi, Sandvik
    i can see the ERROR message: Command returned failure code 1 during SSH session .... you can try these:

1. stop firewall on the hosted_engine_1
2. running command: vdsm-tool configure

    if it's still failure, please attach your engine.log and vdsm.log

2014-11-20 7:55 GMT+08:00 Sandvik Agustin <agustinsandvik@gmail.com>:

Hi Chou,

I have successfully install the hosted engine, but at the end of the installation I have this kind of error message

 To continue make a selection from the options below:

          (1) Continue setup - engine installation is complete

          (2) Power off and restart the VM

          (3) Abort setup

          (1, 2, 3)[1]:

[ INFO  ] Engine replied: DB Up!Welcome to Health Status!

          Enter the name of the cluster to which you want to add the host (Default) [Default]:

[ INFO  ] Waiting for the host to become operational in the engine. This may take several minutes...

[ ERROR ] The VDSM host was found in a failed state. Please check engine and bootstrap installation logs.

[ ERROR ] Unable to add hosted_engine_1 to the manager

          Please shutdown the VM allowing the system to launch it as a monitored service.

          The system will wait until the VM is down.

[ INFO  ] Enabling and starting HA services

          Hosted Engine successfully set up

[ INFO  ] Stage: Clean up

[ INFO  ] Generating answer file '/etc/ovirt-hosted-engine/answers.conf'

[ INFO  ] Answer file '/etc/ovirt-hosted-engine/answers.conf' has been updated

[ INFO  ] Stage: Pre-termination

[ INFO  ] Stage: Termination

The ovirt webadmin is accessible, but my hosted_engine_1 status failed. I tried to activate it inside the webadmin, but it say's Error while executing action: 

hosted_engine_1:

• Cannot activate Host. Host has no unique id.

and when I try to reinstall it on the webadmin, nothing happen it still failed status.

I hope you can help me.

Please see attach for screenshot.

Thanks in advance.

sandvik

On Wed, Nov 19, 2014 at 10:32 PM, Sandvik Agustin <agustinsandvik@gmail.com> wrote:

Hi guys,

First of all I want to thank you for replying my email.

@Chou, yes I can access the engine webadmin.

@Chao, I've tried the no. 1 option and it worked, when I check my /etc/hosts I have hostname conflict, then the ovirt engine is now reachable, but there's another error message, it say's invalid certificate. Is this because of I've put different FQDN during the installation process?

On Wed, Nov 19, 2014 at 11:40 AM, Coffee Chou <coffee.zyr@gmail.com> wrote:

Hi, Chao
    You may make a mistake, that's not my setup :-)
    But i don't think it's a problem of password. If the passwords were not the same, it will throw an ERROR of:
[ ERROR ] Cannot automatically add the host to cluster None: HTTP Status 401
[ ERROR ] Failed to execute stage 'Closing up': Cannot add the host to cluster None


    so, i guess, maybe Sandvik's setup is still not accessable ?

2014-11-19 11:12 GMT+08:00 Xie, Chao <xiec.fnst@cn.fujitsu.com>:

Hi, Chou

         It seems your rhevm is not setup successfully. I suggest you can think about the two possible root cause below:

         1. your /etc/hosts about host/rhevm-vm is configured correctly?

         2. your password set in hosted-engine –deploy and rhevm-setup is same ?

 

If those are not your problem cause, Please provide more log about it.

 

发件人: users-bounces@ovirt.org [mailto:users-bounces@ovirt.org] 代表 Coffee Chou
发送时间: 2014年11月19日 10:08
收件人: Sandvik Agustin
抄送: users@ovirt.org
主题: Re: [ovirt-users] Engine is still unreachable

 

Hi, can you access Engine webadmin with this ERROR message?

 

2014-11-18 19:45 GMT+08:00 Sandvik Agustin <agustinsandvik@gmail.com>:

Hi!,

 

 

I have install ovirt 3.4 on centos 6.6 following this documentation http://community.redhat.com/blog/2014/03/up-and-running-with-ovirt-3-4/

 

I have already completed the installation of ovirt engine inside of the vm, when going back to hosted-engine --deploy terminal and choosing 1 the hosted-engine --deploy says:

 

(1, 2, 3)[1]: 1

[ ERROR ] Engine is still unreachable

          Engine health status page is not yet reachable.

          To continue make a selection from the options below:

          (1) Continue setup - engine installation is complete

          (2) Power off and restart the VM

          (3) Abort setup

 

 

what should I do? how to fix this?


Thanks in advance,

sandvik

_______________________________________________
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users