It's unclear what is the current status of your network configuration, perhaps you can share
your /etc/sysconfig/network-scripts content and the output of "ip addr".

Please also include the following information:
- What are the networks you expect to have on the host?
- The persisted VDSM config currently on the host: /var/lib/vdsm/persistence/netconf

Thanks,
Edy.


On Fri, Feb 10, 2017 at 7:31 PM, Bryan Sockel <Bryan.Sockel@altn.com> wrote:
Need some help.  I was doing some work on one of my ovirt hosts, removed it from cluster, and re-added it to the cluster to bring it back into my working cluster.  I got a messege that my network's where out of sync.  I accidentally sync'd up my working network, now neither of my hosts will bring launch my hosted engine appliance.  While machines aren't currently mission critical, i do need to get these machines backup up and running.
 
 
The network configuration is supposed to be 6 nics forming a bond network, my vlan's hanging off that bond, including my ovirtmgmt network.
 
 
 
 
Feb 10 11:17:22 vm-host-altn-2.altn.int kernel: tg3 0000:81:00.1 p1p2: Flow control is off for TX and off for RX
Feb 10 11:17:22 vm-host-altn-2.altn.int kernel: tg3 0000:81:00.1 p1p2: EEE is disabled
Feb 10 11:17:22 vm-host-altn-2.altn.int kernel: bond0: link status definitely up for interface p1p2, 1000 Mbps full duplex
Feb 10 11:17:26 vm-host-altn-2.altn.int network[1522]: Bringing up interface bond0.102:  [  OK  ]
Feb 10 11:17:26 vm-host-altn-2.altn.int network[1522]: Bringing up interface bond0.20:  can't add bond0.20 to bridge DMZ: Operation not supported
Feb 10 11:17:26 vm-host-altn-2.altn.int network[1522]: [  OK  ]
Feb 10 11:17:26 vm-host-altn-2.altn.int network[1522]: Bringing up interface bond0.30:  can't add bond0.30 to bridge Devel: Operation not supported
Feb 10 11:17:26 vm-host-altn-2.altn.int network[1522]: [  OK  ]
Feb 10 11:17:26 vm-host-altn-2.altn.int network[1522]: Bringing up interface bond0.40:  can't add bond0.40 to bridge Lab: Operation not supported
Feb 10 11:17:26 vm-host-altn-2.altn.int network[1522]: [  OK  ]
Feb 10 11:17:26 vm-host-altn-2.altn.int network[1522]: Bringing up interface bond0.50:  can't add bond0.50 to bridge Workstation: Operation not supported
Feb 10 11:17:26 vm-host-altn-2.altn.int network[1522]: [  OK  ]
Feb 10 11:17:26 vm-host-altn-2.altn.int network[1522]: Bringing up interface Workstation:  device Workstation already exists; can't create bridge with the sa
Feb 10 11:17:26 vm-host-altn-2.altn.int network[1522]: [FAILED]
Feb 10 11:17:26 vm-host-altn-2.altn.int systemd[1]: network.service: control process exited, code=exited status=1
Feb 10 11:17:26 vm-host-altn-2.altn.int systemd[1]: Failed to start LSB: Bring up/down networking.
-- Subject: Unit network.service has failed
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit network.service has failed.
 
 
......
 
 
Thanks
 
 

_______________________________________________
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users