On Wed, Sep 13, 2017 at 1:53 PM, Donny Davis <donny@fortnebula.com> wrote:

As long as the switch is setup for 802.3AD (LACP) then you should be fine. I used the UI to setup my bond's and here is the output from my hypervisor

OK, thanks.

I suppose bond0 is where you have your lacp bonding

What do you get in output on your node with the command

cat /proc/net/bonding/bond0

Could it do any difference to do 802.3ad on a tagged or untagged vlan?

Thanks,

Gianluca