Hi everyone,

I have this bloody card installed on a node,  and it seems that no driver can be loaded for it,  "ip link sh"  does not show it.

Any recommendation about installing this network card on oVirt 4.2.8  ?

lspci -v

....

05:00.0 Ethernet controller: NetXen Incorporated NX3031 Multifunction 1/10-Gigabit Server Adapter (rev 42)
        Subsystem: Hewlett-Packard Company NC522SFP Dual Port 10GbE Server Adapter
        Flags: fast devsel, IRQ 31
        Memory at d9c00000 (64-bit, non-prefetchable) [size=2M]
        Memory at da000000 (64-bit, non-prefetchable) [size=32M]
        Expansion ROM at d8000000 [disabled] [size=64K]
        Capabilities: [40] MSI-X: Enable- Count=64 Masked-
        Capabilities: [80] Power Management version 3
        Capabilities: [a0] MSI: Enable- Count=1/32 Maskable- 64bit+
        Capabilities: [c0] Express Endpoint, MSI 00
        Capabilities: [100] Advanced Error Reporting
        Capabilities: [140] Device Serial Number 59-69-46-61-6e-48-73-75
        Kernel modules: netxen_nic

05:00.1 Ethernet controller: NetXen Incorporated NX3031 Multifunction 1/10-Gigabit Server Adapter (rev 42)
        Subsystem: Hewlett-Packard Company NC522SFP Dual Port 10GbE Server Adapter
        Flags: fast devsel, IRQ 33
        Memory at d9e00000 (64-bit, non-prefetchable) [size=2M]
        Memory at dc000000 (64-bit, non-prefetchable) [size=32M]
        Capabilities: [40] MSI-X: Enable- Count=64 Masked-
        Capabilities: [80] Power Management version 3
        Capabilities: [a0] MSI: Enable- Count=1/32 Maskable- 64bit+
        Capabilities: [c0] Express Endpoint, MSI 00
        Capabilities: [100] Advanced Error Reporting
        Capabilities: [140] Device Serial Number 59-69-46-61-6e-48-73-75
        Kernel modules: netxen_nic

dmesg | grep netxen
[    2.188078] netxen_nic 0000:05:00.0: 2MB memory map
[    2.188371] netxen_nic 0000:05:00.0: Timeout reached  waiting for rom done
[    2.188442] netxen_nic 0000:05:00.0: Error getting board config info.
[    2.189488] netxen_nic: probe of 0000:05:00.0 failed with error -5
[    2.190438] netxen_nic 0000:05:00.1: 2MB memory map
[    2.190741] netxen_nic 0000:05:00.1: Timeout reached  waiting for rom done
[    2.190808] netxen_nic 0000:05:00.1: Error getting board config info.
[    2.190964] netxen_nic: probe of 0000:05:00.1 failed with error -5

...

Thank you very much !