Hi Vijay,

Gluster was 3.2.7 and now i have upgraded to "glusterfs-server-3.3.1-8.fc17.x86_64" .

Now its works fine, but now i have only one host & I wanted try with two hosts since I was facing the issue "SPM contending continuously" with dreyou packages on centos 6.3 that is the reason I wanted to try with fedora 17 with ovirt 3.1.
Once i get one more server again i will continue adding hosts to my cluster.

Thanks,
Jithin





On Tue, Jan 22, 2013 at 9:20 AM, Vijay Bellur <vbellur@redhat.com> wrote:
On 01/21/2013 01:50 PM, Kanagaraj Mayilsamy wrote:
Hi Jithin,

  By looking at the logs, looks like you already had a volume named 'vol1' in the gluster and you have tried to create another volume with the same name from the UI. Thats why you were able to see the volume 'vol1' even after the creation was failed.

  I am not sure which version of ovirt-engine you are using. The recent releases(3.2) and the upstream code currently have the support for reflecting the old volumes in the UI even though there were created via UI or directly from CLI. With this change vol1 should have appeared in the UI even before the creation.

So it looks like there are no issues with the creation of volume. I am not familiar with the mount issues, some one else will help you out.


Can you please provide the glusterfs version installed on the host from where you are trying to mount?

Note that glusterfs 3.3 or 3.4 is not compatible with glusterfs 3.2 & hence you cannot have a mix of these versions in the cluster or between client & servers.

Thanks,
Vijay



Thanks,
Kanagaraj

----- Original Message -----
From: "Jithin Raju" <rajujith@gmail.com>
To: "Kanagaraj Mayilsamy" <kmayilsa@redhat.com>, users@ovirt.org
Sent: Monday, January 21, 2013 1:33:56 PM
Subject: Re: [Users] gluster volume creation error


Hi Kanagaraj,


PFA,


gluster version info:
glusterfs-geo-replication-3.2.7-2.fc17.x86_64
glusterfs-3.2.7-2.fc17.x86_64
glusterfs-fuse-3.2.7-2.fc17.x86_64
glusterfs-rdma-3.2.7-2.fc17.x86_64
vdsm-gluster-4.10.0-10.fc17.noarch
glusterfs-server-3.2.7-2.fc17.x86_64


Thanks,
Jithin



On Mon, Jan 21, 2013 at 1:15 PM, Kanagaraj Mayilsamy <
kmayilsa@redhat.com > wrote:





----- Original Message -----
From: "Jithin Raju" < rajujith@gmail.com >
To: users@ovirt.org
Sent: Monday, January 21, 2013 1:10:15 PM
Subject: [Users] gluster volume creation error



Hi ,


Volume creation is failing in posixfs data center.


While trying to create a distribute volume web UI exits with error:


"creation of volume failed" and volume is not listed in web UI.

Can you please provide the engine.log and vdsm.log(from all the hosts
in the cluster ).



 From the backend I can see volume got created.


gluster volume info



Volume Name: vol1
Type: Distribute
Status: Created
Number of Bricks: 2
Transport-type: tcp
Bricks:
Brick1: x.250.76.71:/data
Brick2: x.250.76.70:/data


When I try to mount the volume manually to /mnt
its not giving any message


exit status is zero.


mount command listed as below:


fig:/vol1 on /mnt type fuse.glusterfs
(rw,relatime,user_id=0,group_id=0,default_permissions,allow_other,max_read=131072)



when I run a df it gives me like below:
"df: `/mnt': Transport endpoint is not connected"



So i just tail'ed
"/var/log/glusterfs/etc-glusterfs-glusterd.vol.log"



[2013-01-21 11:30:07.828518] W
[socket.c:1494:__socket_proto_state_machine] 0-socket.management:
reading from socket failed. Error (Transport endpoint is not
connected), peer ( 135.250.76.70:1009 )
[2013-01-21 11:30:10.839882] W
[socket.c:1494:__socket_proto_state_machine] 0-socket.management:
reading from socket failed. Error (Transport endpoint is not
connected), peer ( 135.250.76.70:1007 )
[2013-01-21 11:30:13.852374] W
[socket.c:1494:__socket_proto_state_machine] 0-socket.management:
reading from socket failed. Error (Transport endpoint is not
connected), peer ( 135.250.76.70:1005 )
[2013-01-21 11:30:16.864634] W
[socket.c:1494:__socket_proto_state_machine] 0-socket.management:
reading from socket failed. Error (Transport endpoint is not
connected), peer ( 135.250.76.70:1003 )
[2013-01-21 11:30:19.875986] W
[socket.c:1494:__socket_proto_state_machine] 0-socket.management:
reading from socket failed. Error (Transport endpoint is not
connected), peer ( 135.250.76.70:1001 )
[2013-01-21 11:30:22.886854] W
[socket.c:1494:__socket_proto_state_machine] 0-socket.management:
reading from socket failed. Error (Transport endpoint is not
connected), peer ( 135.250.76.70:999 )
[2013-01-21 11:30:25.898840] W
[socket.c:1494:__socket_proto_state_machine] 0-socket.management:
reading from socket failed. Error (Transport endpoint is not
connected), peer ( 135.250.76.70:997 )
[2013-01-21 11:30:28.910000] W
[socket.c:1494:__socket_proto_state_machine] 0-socket.management:
reading from socket failed. Error (Transport endpoint is not
connected), peer ( 135.250.76.70:995 )
[2013-01-21 11:30:31.922336] W
[socket.c:1494:__socket_proto_state_machine] 0-socket.management:
reading from socket failed. Error (Transport endpoint is not
connected), peer ( 135.250.76.70:993 )
[2013-01-21 11:30:34.934772] W
[socket.c:1494:__socket_proto_state_machine] 0-socket.management:
reading from socket failed. Error (Transport endpoint is not
connected), peer ( 135.250.76.70:991 )
[2013-01-21 11:30:37.946215] W
[socket.c:1494:__socket_proto_state_machine] 0-socket.management:
reading from socket failed. Error (Transport endpoint is not
connected), peer ( 135.250.76.70:989 )




Just wanted to know what am I doing wrong here?


package details:



vdsm-python-4.10.0-10.fc17.x86_64
vdsm-cli-4.10.0-10.fc17.noarch
vdsm-xmlrpc-4.10.0-10.fc17.noarch
vdsm-4.10.0-10.fc17.x86_64
vdsm-gluster-4.10.0-10.fc17.noarch


selinux is permissive,iptables i have flushed.


Thanks,
Jithin
_______________________________________________
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users



_______________________________________________
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users