Hi Vinicius, i'm sorry, I thought I had replied already.

I'm mostly using IPoIB, but gluster is using some over RDMA. I'm using it a few different ways,

5 IB nodes, all have dual port ConnectX-3 cards @ 40GB

2 nodes are running windows, one port on each is used for a sync channel for starwind Vsan to mirror ~20tb of date. The second ports are using for iSCS sharing SMB fiile shares for other IB nodes.

3 nides are running CentOS 7 and ovirt. One of the ports on each are used for gluster synchronzaton, gluster is set to use both IPoIB & RDMA. Then the other ports are using for migratons, iSCSI sharing, and a backup admin channel.

On Fri, Mar 1, 2019 at 1:36 PM Vinícius Ferrão <ferrao@versatushpc.com.br> wrote:

Darkytoo have you received my message.

I’m really curious about your setup using Infiniband.

Thanks,

> On 14 Feb 2019, at 07:42, Vinícius Ferrão <ferrao@versatushpc.com.br> wrote:
>
> Are you guys running IPoIB for Infiniband Storage? Is it true IB mode? Or Ethernet over IB?
>
> If using NFS on top of it, RDMA is working
> with NFSoRDMA?
>
> I’m really curious about your setup.
>
> Thanks,
>
> Sent from my iPhone
>
>> On 10 Feb 2019, at 23:55, darkytoo@gmail.com wrote:
>>
>> You were just like me, I also thought it would pick up settings from cockpit, but once I realized you had to configure the network again when adding to the host, everything sort of fell into line. I would make sure and monitor the networks so you can see the traffic going through the infiniband and not the ethernet.
>> _______________________________________________
>> Users mailing list -- users@ovirt.org
>> To unsubscribe send an email to users-leave@ovirt.org
>> Privacy Statement: https://www.ovirt.org/site/privacy-policy/
>> oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
>> List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/WC6W7KRXDENXVCTXW6F24742YKDE6ZHK/