On Tue, Feb 2, 2016 at 8:33 PM, Paul Groeneweg | Pazion <paul@pazion.nl> wrote:
Hi Simone,

I have exactly as you stated, but found maybe a problem/bug.

1. I put hosted engine to maintenance and powered it off
2. Changed memory in /etc/ovirt-hosted-engine/vm.conf to memSize=8192
3. I restarted both ovirt-ha-agent and ovirt-ha-broker: /etc/init.d/ovirt-ha-broker restart && /etc/init.d/ovirt-ha-agent restart
4. I started hosted-engine and turned off global maintenance.

The hostedengine webinterface still says 4096MB

Now I logged on with ssh and ran the command "free -m"
This command shows:

Mem:          7870       ...

So, I believe my hostedengine was updated, but the webinterface is showing incorrect values: http://screencast.com/t/Bg5xU0Ja

Any idea why web interface is not showing correct value under Defined or Physical memory?

You are not the first that reports that: it seams that it's just a timeout/refresh issue and you have just to wait. Adding Michal here.
 

Regards,
Paul





Op di 2 feb. 2016 om 09:31 schreef Paul Groeneweg | Pazion <paul@pazion.nl>:
Hi Simone,

Thanks!
I think I did not restart broker and agent before going out of maintenance mode.
I will try these steps and let you know.

Regards,
Paul

Op di 2 feb. 2016 om 09:26 schreef Simone Tiraboschi <stirabos@redhat.com>:
On Tue, Feb 2, 2016 at 12:11 AM, Paul Groeneweg | Pazion <paul@pazion.nl> wrote:
I am trying to change memory of my hosted engine.
I am running oVirt 3.6 with CentOS 6 Hosts with hosted engine on nfs3

We didn't build VDSM and hosted-engine-ha from 3.6 for Centos 6 so basically your hosts are still with oVirt 3.5.

In order to edit the hosted-engine VM on oVirt 3.5, you have to:
1. set global-maintenance mode
2. shutdown the engine VM
3. manually edit /etc/ovirt-hosted-engine/vm.conf on each host (keeping ti coherent is up to you, take a backup)
4. restart ovirt-ha-broker and ovirt-ha-agent services on each host.
5. exits global maintenance mode

Updating to oVirt 3.6 you will be able to edit some parameters of the engine VM from the engine itself.
 

1. I put hosted-engine to maintenance, shutdown vm
2. update /etc/ovirt-hosted-engine/vm.conf 
3. restart vm disable maintenance

Memory is still old value.
How can I change the hosted engine VM?


When I check /etc/ovirt-hosted-engine/hosted-engine.conf there is no 
"conf_volume_UUID" entry.

Do I need to create a shared config volume entry ( conf_volume_UUID ), so I can edit hosted engine VM? If so, how can this be done?

I did try to rerun engine-setup, but this did not trigger anything.

Kind regards,

Paul Groeneweg
Pazion

 ***disclaimer*** 
"This e-mail and any attachments thereto may contain information which is confidential and/or protected by intellectual property rights and are intended for the sole use of the recipient(s) named above. Any use of the information contained herein (including, but not limited to, total or partial reproduction, communication or distribution in any form) by persons other than the designated recipient(s) is prohibited. If you have received this e-mail in error, please notify the sender either by telephone or by e-mail and delete the material from any computer. Thank you for your cooperation."
--
Met vriendelijke groeten,

Paul Groeneweg
Pazion
Webdevelopment  -  Hosting  -  Apps

M +31 614 277 577

 ***disclaimer*** 
"This e-mail and any attachments thereto may contain information which is confidential and/or protected by intellectual property rights and are intended for the sole use of the recipient(s) named above. Any use of the information contained herein (including, but not limited to, total or partial reproduction, communication or distribution in any form) by persons other than the designated recipient(s) is prohibited. If you have received this e-mail in error, please notify the sender either by telephone or by e-mail and delete the material from any computer. Thank you for your cooperation."

_______________________________________________
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


--
Met vriendelijke groeten,

Paul Groeneweg
Pazion
Webdevelopment  -  Hosting  -  Apps

M +31 614 277 577

 ***disclaimer*** 
"This e-mail and any attachments thereto may contain information which is confidential and/or protected by intellectual property rights and are intended for the sole use of the recipient(s) named above. Any use of the information contained herein (including, but not limited to, total or partial reproduction, communication or distribution in any form) by persons other than the designated recipient(s) is prohibited. If you have received this e-mail in error, please notify the sender either by telephone or by e-mail and delete the material from any computer. Thank you for your cooperation."
--
Met vriendelijke groeten,

Paul Groeneweg
Pazion
Webdevelopment  -  Hosting  -  Apps

M +31 614 277 577

 ***disclaimer*** 
"This e-mail and any attachments thereto may contain information which is confidential and/or protected by intellectual property rights and are intended for the sole use of the recipient(s) named above. Any use of the information contained herein (including, but not limited to, total or partial reproduction, communication or distribution in any form) by persons other than the designated recipient(s) is prohibited. If you have received this e-mail in error, please notify the sender either by telephone or by e-mail and delete the material from any computer. Thank you for your cooperation."