On Sun, Mar 12, 2017 at 3:43 PM, Rogério Ceni Coelho <rogeriocenicoelho@gmail.com> wrote:

I think you define vlans on vm virtual nic OS like you do as usual. Monday i will try and share results. Bye.


Em Dom, 12 de mar de 2017 10:40, FERNANDO FREDIANI <fernando.frediani@upx.com> escreveu:
Great !

What about a range of VLANs, is it also supported ?

That was the OVS note all about, only with an OVS bridge it is possible to define/select the vlans which are exposed
to the VM vnic. But this is not available at the moment.
As Rogério mentioned, define the VLAN/s on the VM vnic.


2017-03-11 17:47 GMT-03:00 Edward Haas <ehaas@redhat.com>:
Passing a trunk to the vnic is supported long ago.
Just create a network over a nic/bond that is connected to a trunk port and do not define any VLAN (we call it non vlan network).
In oVirt, a non-vlan network will ignore the VLAN tag and will forward the packets as is onward.
It is up to the VM vnic to define vlans or use a promisc mode to see everything.

OVS can add a layer of security over the existing, by defining explicitly which vlans are allowed for a specific vnic, but it is not
currently available.


On Thu, Mar 9, 2017 at 11:40 PM, Simon Vincent <sv@srvincent.co.uk> wrote:
I was wondering if open vswitch will get round this problem. Has anyone tried it?

On 9 Mar 2017 7:41 pm, "Rogério Ceni Coelho" <rogeriocenicoelho@gmail.com> wrote:
Hi,

Ovirt user interface does not allow to input 4095 as a tag vlan number ... Only values between 0 and 4094.

This is useful to me too. Maybe any other way ?

Em qui, 9 de mar de 2017 às 16:15, FERNANDO FREDIANI <fernando.frediani@upx.com> escreveu:

Have you tried use Vlan 4095 ? On VMware it used to be the way to pass all Vlans from a vSwitch to a Vlan in a single port. And yes I have used it also for pfSense.

Fernando


On 09/03/2017 16:09, Simon Vincent wrote:
Is it possible to pass multiple VLANs to a VM (pfSense) using a single virtual NIC? All my existing oVirt networks are setup as a single tagged VLAN. I know this didn't used to be supported but wondered if this has changed. My other option is to pass each VLAN as a separate NIC to the VM however if I needed to add a new VLAN I would have to add a new interface and reboot the VM as hot-add of NICs is not supported by pfSense.




_______________________________________________
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

_______________________________________________
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

_______________________________________________
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


_______________________________________________
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users