Edy, any idea what can cause this?Indeed very odd, this shouldn't behave this way, just tested it my self and it is working as expected. Unless i miss understood you here, do you use a different IP address when switching to static or the same IP that you got from dhcp? if yes, then this is another flow..Can you please share the vdsm version and vdsm log with us?
On Tue, Mar 20, 2018 at 11:10 AM, zois roupas <roupas_zois@hotmail.com> wrote:Hi Michael and thanks a lot for the time
Great step by step instructions but something strange is happening while trying to change to static ip. I tried to do the change while the host was in maintenance mode and in activate mode but again after some minutes the system reverts to the ip that dhcp is serving!
What am i missing here? Do you have any ideas?
Best Regards
Zois
From: Michael Burman <mburman@redhat.com>
Sent: Tuesday, March 20, 2018 8:46 AM
To: zois roupas
Cc: users@ovirt.org
Subject: Re: [ovirt-users] Change ovirtmgmt ip from dhcp to static in aCheers)- If the spoken host is a SPM host, I recommend to set it first to maintenance mode, do the switch and then activate. For non-SPM host this will work fine as well when the host is UP.- Note that in some cases, specially if this is a SPM host you will loose connectivity to host for few seconds and host may go to non-responsive state, on a non-SPM host usually this woks without any specific issues.Hello Zois,It pretty easy to do, via the webadmin UI , go to Hosts main tab > Choose host > go to 'Network Interfaces' sub tab > Press the 'Setup Host Networks' button > press the pencil icon on your management network > and choose Static IP > press OK and OK to approve the operation.
On Mon, Mar 19, 2018 at 12:15 PM, zois roupas <roupas_zois@hotmail.com> wrote:
Hello everyone
I've made a rookie mistake by installing ovirt 4.2 in centos 7 with dhcp instead of a static ip configuration. Both engine and host are in the same machine cause of limited resources and i was so happy that everything worked so well that i kept configuring and installing vm's ,adding local and nfs storage and setting up the backup!
As you understand i must change the configuration to static ip and i can't find any guide describing the correct procedure. Is there an official guide to change configuration without causing any trouble?
I've found this thread http://lists.ovirt.org/
pipermail/users/2014-May/02443 but this is for a hosted engine and doesn't help when both engine and host are in the same machine2.html
Thanx in advance
Best Regards
Zois
_______________________________________________
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
--
Michael Burman
Senior Quality engineer - rhv network - redhat israel
mburman@redhat.com M: 0545355725 IM: mburman
--Michael Burman
Senior Quality engineer - rhv network - redhat israel
mburman@redhat.com M: 0545355725 IM: mburman
_______________________________________________
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users