Noting more configuration ,if I configure openfiler  as a iSCSI Lun able to detect the lun , moment I configure EMC Lun unable to detect the Lun ID .

Any other configs do I need to do in Host ? any comands to delete the old Lun ID ?

.[root@pbuovirt3 ~]# cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 03 Id: 00 Lun: 00
  Vendor: HP       Model: P410i            Rev: 2.00
  Type:   RAID                             ANSI  SCSI revision: 00
Host: scsi0 Channel: 00 Id: 00 Lun: 00
  Vendor: HP       Model: LOGICAL VOLUME   Rev: 2.00
  Type:   Direct-Access                    ANSI  SCSI revision: 05
Host: scsi1 Channel: 00 Id: 00 Lun: 00
  Vendor: Optiarc  Model: DVD RW AD-7561S  Rev: AH52
  Type:   CD-ROM                           ANSI  SCSI revision: 05
Host: scsi8 Channel: 00 Id: 00 Lun: 00
  Vendor: DGC      Model: LUNZ             Rev: 3103
  Type:   Direct-Access                    ANSI  SCSI revision: 04
[root@pbuovirt3 ~]#





On Tue, Sep 20, 2016 at 8:51 PM, Dan Yasny <dyasny@gmail.com> wrote:
It looks like iscsi does the job, bu multipath doesn't. What do you use on the hosts? How is multipath.conf configured? Any other special configuration you use? 

Also, can you paste /proc/scsi/scsi and blkid

On Tue, Sep 20, 2016 at 11:18 AM, Budur Nagaraju <nbudoor@gmail.com> wrote:

Below are the details,

On Tue, Sep 20, 2016 at 8:27 PM, Dan Yasny <dyasny@gmail.com> wrote:
Try this on the host:

iscsiadm -m discovery -t st -p 10.206.67.46
iscsiadm -m node -L all
iscsiadm -m node
iscsiadm -m session
multipath -ll

and pastebin the output

On Tue, Sep 20, 2016 at 10:54 AM, Budur Nagaraju <nbudoor@gmail.com> wrote:
Yes I did that too but no luck :(

Thanks,
Nagaraju


On Tue, Sep 20, 2016 at 8:06 PM, Dan Yasny <dyasny@gmail.com> wrote:
After you discover, did you also click the login button?

On Tue, Sep 20, 2016 at 10:28 AM, Budur Nagaraju <nbudoor@gmail.com> wrote:
Below are the Steps,

Under Storage Tab:New Domain -->Name>Domain Type-->Data/iSCSi-->Select the Host -->Discover the Targets ,

After giving all the info able to detect the iSCSI targets but uable to get the Lun id ,below are the details of the logs.

On Tue, Sep 20, 2016 at 6:47 PM, Dan Yasny <dyasny@gmail.com> wrote:
Can you describe what you tried to do and how it failed?

On Tue, Sep 20, 2016 at 5:54 AM, Budur Nagaraju <nbudoor@gmail.com> wrote:
HI All,

While configuring iSCSI LUN is not getting detected any documents to configure iSCSI in oVirt ?

Thanks,
Nagaraju


_______________________________________________
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users