Ok I managed to continue choosing DHCP, which interestingly, it took
an IP from the 10.200.30.0/23 subnet.
I saw a lot of selinux AVC issues in journalctl, but I didnt see the
install process end and the screen was obscured with multiple network
messages.
Is it ok to ssh in and make it static?
Am I allowed to make local changes inside it?
Because its not resolving to the IP address DNS has for it (10.200.30.10/23).
I would also like to make it an IPA client and such.

On Wed, Oct 27, 2021 at 9:56 PM Sina Owolabi <notify.sina@gmail.com> wrote:
>
> Rejected:
>
>           How should the engine VM network be configured? (DHCP,
> Static)[DHCP]: Static
>           Please enter the IP address to be used for the engine VM []:
> 10.200.30.10/23
> [ ERROR ] Failed to execute stage 'Environment customization':
> IPAddress() does not support netmasks or subnet prefixes! See
> documentation for details.
> [ INFO  ] Stage: Clean up
> [ INFO  ] Cleaning temporary resources
>
> On Wed, Oct 27, 2021 at 9:53 PM Alex McWhirter <alex@triadic.us> wrote:
> >
> > On 2021-10-27 16:09, Sina Owolabi wrote:
> > > Its really weird.
> > > Just tried again, with  the same failure, on a freshly reinstalled
> > > CentOS 8.
> > > Server has a number of vlan interfaces, on a physical interface
> > > enp2s0f1, all in the defined notation,
> > > one vlan interface has an IP, 10.200.10.3/23,
> > > Second physical interface enp2s0f0 is configured for 10.200.30.3/23,
> > > is the interface with a gateway and DNS, and the router can provide
> > > other IPs with DHCP here, and which I hope to have ovirtmgmt on.
> > > I run hosted-engine --deploy, I select the gateway for the enp2s0f1
> > > vlan (10.200.10.1).
> > >
> > > Please indicate the gateway IP address [10.200.30.1]: 10.200.10.1
> > >         Please indicate a nic to set ovirtmgmt bridge on (enp2s0f1,
> > > enp2s0f1.1014, enp2s0f1.1016, enp2s0f1.1015, enp2s0f1.1005, enp2s0f0)
> > > [enp2s0f1.1014]: enp2s0f0
> > >           Please specify which way the network connectivity should be
> > > checked (ping, dns, tcp, none) [dns]:dns
> > >           How should the engine VM network be configured? (DHCP,
> > > Static)[DHCP]: Static
> > >           Please enter the IP address to be used for the engine VM []:
> > > 10.200.30.10
> > > [ ERROR ] The Engine VM (10.200.30.10/32) and this host
> > > (10.200.30.3/32) will not be in the same IP subnet.
> > >          Static routing configuration are not supported on automatic
> > > VM configuration.
> > >
> > > What can I try differently?
> > >
> >
> > Try setting the subnet with the engine IP.
> >
> > I.E. instead of 10.200.30.10 do 10.200.30.10/23
>
>
>
> --
>
> cordially yours,
>
> Sina Owolabi
>
> +2348176469061



--

cordially yours,

Sina Owolabi

+2348176469061