Why do you use OVS at all? If you have VLANs, all you need is to tag the mgmt traffic, and create a VM traffic VLAN with a different MTU. The bridge and underlying NICs will have MTU=9000 and the VM bridge will have MTU=1500

On Thu, Nov 20, 2014 at 7:40 PM, Phil Daws <uxbod@splatnix.net> wrote:

Hello:

am really enjoying oVirt but have now hit an issue with iSCSI. As there is only one NIC in the host I have had to enable an MTU of 9000 on ovirtmgmt. Then have vNIC profiles on that interface which are using a custom hook for Openvswitch. I have created a specific vLAN for iSCSI traffic and on the initiator and targets have set their respective interface MTUs to be 9000. When I connect to a LUN it is timing out straight away with a 1011 error. If I drop the MTU back to 1500 all works okay. This is all fine on my other KVM, non-oVirt, system so am wondering if I have missed a step ?

Thanks, Phil
_______________________________________________
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users