Hello,

i see i have already

devices {
    device {
                vendor                 "LIO-ORG"
                hardware_handler       "1 alua"
                features               "1 queue_if_no_path"
                path_grouping_policy   "failover"
                path_selector          "queue-length 0"
                failback               immediate
                path_checker           directio
                #path_checker           tur
                prio                   alua
                prio_args              exclusive_pref_bit
                #fast_io_fail_tmo       25
                no_path_retry          queue
    }
}

Which should result in the same beahaviour, correct ?

Hello,

I manually renamed them via multipath.conf

multipaths {
    multipath {
        wwid     36001405a26254e2bfd34b179d6e98ba4
        alias    mpath-myhostname-disk1
    }
}

Before I configured multipath (I installed without first before I knew "mpath" parameter in setup !) I had the problem of readonly root a few times but the hints and settings (for iscsid.conf) I found out didn't help. Thats why I had to tweak dracut ramdisk to set up multipath and understand LVM activation and so on of ovirt-ng the hard way.

So you suggest to add

"no_path_retry queue"

--

Ralf Schenk fon +49 (0) 24 05 / 40 83 70 fax +49 (0) 24 05 / 40 83 759 mail rs@databay.de		Databay AG Jens-Otto-Krag-Straße 11 D-52146 Würselen www.databay.de
Sitz/Amtsgericht Aachen • HRB:8437 • USt-IdNr.: DE 210844202 Vorstand: Ralf Schenk, Dipl.-Ing. Jens Conze, Aresch Yavari, Dipl.-Kfm. Philipp Hermanns Aufsichtsratsvorsitzender: Wilhelm Dohmen

---