Ну это Николаев Алексей загнул.

System Requirements

Minimum Hardware/Software
  • 4 GB memory
  • 20 GB disk space
Optional Hardware
  • Network storage
Recommended browsers
  • Mozilla Firefox 17
  • IE9 and above for the web-admin
  • IE8 and above for the user portal



Прекрасно работает.


Supported Hosts
  • Fedora 20
  • CentOS 6.6, 7.0
  • Red Hat Enterprise Linux 6.6, 7.0
  • Scientific Linux 6.6, 7.0

2015-07-10 10:45 GMT+03:00 Николаев Алексей <alexeynikolaev.post@yandex.ru>:
Ovirt больше не поддерживает CentOS 6 для гипервизоров. CentOS 6 поддерживается только для Ovirt Engine.
Считаю, что сначало надо воспроизвести проблему на CentOS 7.1. Если она сохранится, то будут нужны логи с гипервизоров (/var/log/vdsm/vdsm.log) и лог Ovirt Engine (/var/log/ovirt-engine/engine.log).
 
Логи могут содержать конфиденциальную информацию о вашей системе.
 
 
10.07.2015, 03:06, "martirosov.d" <martirosov.d@emk.ru>:

Hi.

ovirt3.5

Have two servers(node1 and node2) that are runnig Centos6.6.

1. engine on node2. Disables network node1, engine restarts after some
time node1 and everything works fine.
2. engine on node1. Disables network node1, engine moved to node2, node1
but does not reset, although attempts.

That log messages:

2015-Jul-03, 10:42 Host node1 is not responding. It will stay in
Connecting state for a grace period of 120 seconds and after that an
attempt to fence the host will be issued.
2015-Jul-03, 10:39 Host node1 is not responding. It will stay in
Connecting state for a grace period of 120 seconds and after that an
attempt to fence the host will be issued.
2015-Jul-03, 10:36 Host node1 is not responding. It will stay in
Connecting state for a grace period of 120 seconds and after that an
attempt to fence the host will be issued.
2015-Jul-03, 10:34 User admin@internal logged in.
2015-Jul-03, 10:33 Host node1 became non responsive. It has no power
management configured. Please check the host status, manually reboot it,
and click "Confirm Host Has Been Rebooted"
2015-Jul-03, 10:33 Host node2 from cluster emk-cluster was chosen as a
proxy to execute Status command on Host node1.
2015-Jul-03, 10:33 Host node1 is non responsive.

Manual fencing to node1 works from the node2:
# fence_ipmilan -A password -i 10.64.1.103 -l admin -p *** -o status
Getting status of IPMI:10.64.1.103...Chassis power = On
Done

Power Management on node2 test succeeded in oVirt Manager.

i.e. If turn off the host on which the engine, after moving to a healthy
host, engine does not fencing to a problematic host and all VMs that
were on problematic host does not migrate.
If the problem is not with the host on which the engine, then it works:
making fence, and migrates Vms.


_______________________________________________
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


_______________________________________________
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users