It is not clear to me what you are attempting to do exactly, but networking settings should be handled through the setup networks window on Engine.
(Network->Hosts->->[specific host]->Interface tab -> SetupNetwork

You can then define bonds by dragging the nics one over the other.

Thanks,
Edy.

On Tue, Jan 30, 2018 at 9:07 PM, <spfma.tech@e.mail.fr> wrote:
Hi,
I am trying to setup a cluster of two nodes, with self hoste Engine.
Things went fine for the first machine, but it as rather messy about the second one.
I would like to have load balancing and failover for both management network and storage (NFS repository).
 
So what should I exactly do to get a working network stack which can be recognized when I try to add this host to the cluster ?
 
Have tried configuring bonds and briges using Cockpit, using manual "ifcfg" files, but all the time I see the bridges and the bonds not linked in the Engine interface, so the new host cannot be enrolled.
If I try to link "ovirtmgmt" to the the associated bond, I have a connectivity loss because it is the management device, and I have te restart the network services. As management configuration is not OK, I can't setup the storage connection.
 
And if I just try to activate the host, I will install and configure things and then complain about missing "ovirtmgmt" and "nfs" networks, which both exist and work and Centos level.
 
The interface, bonds and bridge names are copy/paste from the first server.
 
# brctl show ovirtmgmt
bridge name    bridge id        STP enabled    interfaces
ovirtmgmt        8000.44a842394200    no        bond0
# ip addr show bond0
33: bond0: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue master ovirtmgmt state UP qlen 1000
    link/ether 44:a8:42:39:42:00 brd ff:ff:ff:ff:ff:ff
    inet6 fe80::46a8:42ff:fe39:4200/64 scope link
       valid_lft forever preferred_lft forever
# ip addr show em1
2: em1: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc mq master bond0 state UP qlen 1000
    link/ether 44:a8:42:39:42:00 brd ff:ff:ff:ff:ff:ff
# ip addr show em3
4: em3: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc mq master bond0 state UP qlen 1000
    link/ether 44:a8:42:39:42:00 brd ff:ff:ff:ff:ff:ff
 
By the way, is it mandatory to stop and disable NetworkManager or not ?
 
Thanks for any kind of help :-)

_______________________________________________
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users