I get the current setting:
[root@gluster1 ~]# gluster volume info all
Volume Name: volume1
Type: Disperse
Volume ID: 237f7379-cd03-44ef-af39-f6065d01d520
Status: Started
Snapshot Count: 0
Number of Bricks: 1 x (2 + 1) = 3
Transport-type: tcp
Bricks:
Brick1: gluster1:/data/glusterfs/myvolume/mybrick1/brick
Brick2: gluster2:/data/glusterfs/myvolume/mybrick1/brick
Brick3: gluster3:/data/glusterfs/myvolume/mybrick1/brick
Options Reconfigured:
transport.address-family: inet
nfs.disable: on
Then I enable the quorum on the server side:
[root@gluster1 ~]# gluster volume set all cluster.server-quorum-ratio 51%
volume set: success
[root@gluster1 ~]#
[root@gluster1 ~]# gluster volume set volume1 cluster.server-quorum-type server
volume set: success
[root@gluster1 ~]#
Now, the configure is :
[root@gluster1 ~]# gluster volume info volume1
Volume Name: volume1
Type: Disperse
Volume ID: 237f7379-cd03-44ef-af39-f6065d01d520
Status: Started
Snapshot Count: 0
Number of Bricks: 1 x (2 + 1) = 3
Transport-type: tcp
Bricks:
Brick1: gluster1:/data/glusterfs/myvolume/mybrick1/brick
Brick2: gluster2:/data/glusterfs/myvolume/mybrick1/brick
Brick3: gluster3:/data/glusterfs/myvolume/mybrick1/brick
Options Reconfigured:
cluster.server-quorum-type: server
transport.address-family: inet
nfs.disable: on
cluster.server-quorum-ratio: 51%
[root@gluster1 ~]#
I want know ,the server quorum is about setting the percen of numbers of the active-connected nodes, no matter what type of the volumes , is this right ?
But if I use the client quorum, the the type of volumes now mounting is acting, only duplicated type volume can use the client quorum, is this right ?
From: users-bounces@ovirt.org <users-bounces@ovirt.org> On Behalf Of Ahmad Khiet
Sent: Thursday, January 21, 2021 2:48 AM
To: tommy <sz_cuitao@163.com>
Cc: users <users@ovirt.org>
Subject: [ovirt-users] Re: For data integrity make sure that the server is configured with Quorum (both client and server Quorum)
Hi,
as shown in the alert message, that Quorum must be configured with GlusterFs in the server side and client side.
please see this resource to configure it for client side and server side https://access.redhat.com/documentation/en-us/red_hat_gluster_storage/3.1/html/administration_guide/sect-managing_split-brain
Have a nice day
On Wed, Jan 20, 2021 at 10:37 AM tommy <sz_cuitao@163.com> wrote:
When I want to create a glusterFS domain, the above words appear.
What’s meaning of these words?
_______________________________________________
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-leave@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/UMTB5A6AODYZJU26ILP4ZL3CNOX5D6KC/
--
